EVB-LIV3F STMICROELECTRONICS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
ST Teseo-LIV3F GNSS platform Multiconstellation GNSS: GPS, Galileo Glonass, Beidou, QZSS supported USB Power Supply and battery charge Internal battery footprint for standalone usage ON/OFF and Reset buttons available NMEA over –U A R T b y U S B – I2C by connector PPS output Leds: –P P S – Power
Description
EVB-LIV3F board is a complete standalone evaluation platform for Teseo-LIV3F GNSS module ST solution. Teseo-LIV3F embeds the high performance ARM microprocessor with embedded flash, UART and I2C serial communication interfaces. Performance and configuration can be analyzed using the ST Teseo Suite Light PC Tool . (1) 1. ST Teseo Suite can freely be downloaded from: http://www.st.com
HW and SW resources EVB-LIV3F
1 HW and SW resources
1.1 ST GNSS solutions
Teseo-LIV3F is part of ST Teseo GNSS family solution supported.
1.2 Power supply
Board powered thought USB or battery for standalone usage. Battery charger supported.
1.3 NMEA port supported:
Teseo-LIV3F-UART over USB (2) Teseo-LIV3F-I2C
1.4 Connectors
Antenna SMA Female Teseo-LIV3F-I2C signals available (on 4x1 connector) VCC, VCC_IO voltage available for power estimation (on 2x2 connector)
1.5 Kit contents
Teseo-LIV3F evaluation board GNSS Antenna USB cable 2. UART/USB bridge driver needed. Driver can be downloaded from Silabs web site
2 Revision history
Table 1. Document revision history 14-Nov-2017 1 Initial release.