EV6001DN-00A MPS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Monolithic Flyback/Forward DC-DC Converter Evaluation Board EV6001DN-00A Rev. 1.0 www.MonolithicPower.com 1 4/12/2006 MPS Proprietary Information. Unaut horized Photocopy and Duplication Prohibited. © 2006 MPS. All Rights Reserved. The Future of Analog IC Technology TM TM GENERAL DESCRIPTION The EV6001DN-00A is an evaluation board for the MP6001, a monolithic Flyback/Forward DC- DC converter. The device integrates a 150V power switch and is capable of delivering up to 15W output power. The MP6001 has an internal soft-start, auto-retry, and incorporates over current, short circuit, and over-voltage protection. It can also skip cycles to maintain zero load regulation. This device is available in an 8-pin SOIC package with an exposed pad. ELECTRICAL SPECIFICATIONS Parameter Symbol Value Units Input Voltage V IN 36–75 V Output Voltage V OUT 5 V Output Current I OUT 2.7 A

FEATURES

  • Integrated 150V Power Switch
  • Integrated 100V Startup Circuit
  • Cycle-by-Cycle Current Limiting
  • Duty Cycle Limiting with Line Feed Forward
  • Input UVLO + Over Voltage Protection
  • Thermal Shutdown

APPLICATIONS

  • Telecom Equipment
  • VoIP Phones, Power over Ethernet (PoE)
  • Distributed Power Conversions “MPS” and “The Future of Analog IC Technology” are Trademarks of Monolithic Power Systems, Inc. EV6001DN-00A EVALUATION BOARD (6.0cm x 2.3cm x 1.2cm) Board Number MPS IC Number EV6001DN-00A MP6001DN EFFICIENCY (%) LOAD CURRENT (A) MP6001-EC01 Efficiency vs Load Current VIN = 48V VIN = 75V VIN = 36V VOUT = 5V

EV6001DN-00A – MONOLITHIC FLYBACK/FORWARD DC-DC CONVERTER EV BOARD EV6001DN-00A Rev. 1.0 www.MonolithicPower.com 2 4/12/2006 MPS Proprietary Information. Unaut horized Photocopy and Duplication Prohibited. © 2006 MPS. All Rights Reserved. TM EVALUATION BOARD SCHEMATIC MP6001 GND LINE FB COMP SW VIN VCC RT EV6001DN-00A_S01 VCC VCC VIN GND EN TRIM VOUT 5V/2.7A GND C17 100pF 10nF C16 100pF NS PC357NT C10 22nF C15 33nF 4.7nF 200V 1nF 1000pF 2kV 200V BAV21W-7-F Output Output OutputFeedback Primary 6.8V Zener 1N4148 R11 NS ZR431LF01TA 40V/3A B340A-13 FB1 SST3906 B0530WS-7 R22 NS R21 NS EV6001DN-00A BILL OF MATERIALS Qty Ref Value Description Package Manufacturer Part Number 2 C1, C3 2.2µF Ceramic Cap., 100V, X7R 1210 Murata GRM32ER72A225KA35L 1 C2 10nF Ceramic Cap., 50V, X7R 603 TDK C1608X7R1H103K 1 C4 10µF Ceramic Cap., 16V, X7R 1206 TDK C3216X7R1C106M 1 C5 1000pF Ceramic Cap., 2kV, NPO 1810 Any 1 C6 4.7nF Ceramic Cap., 200V, X7R 805 Panasonic ECJ-2VB2D472K 1 C7 1µF Ceramic Cap., 25V, X7R 805 TDK C2012X7R1E105K

1 C8 No Stuff

1 C9 1nF Ceramic Cap., 50V, X7R 805 TDK C2012X7R1H102K 1 C10 22nF Ceramic Cap., 50V, X7R 603 TDK C1608X7R1H223K

3 C11,

C12, C13 22µF Ceramic Cap., 6.3V, X7R 1210 TDK C3225X5R0J226M 1 C14 330µF PosCap., 6.3V SMD Sanyo 6TPE330MIL 1 C15 33nF Ceramic Cap., 50V, X7R 603 Panasonic ECJ-1VB1H333K 2 C16, C17 100pF Ceramic Cap., 50V, NPO 603 TDK C1608C0G1H101J 1 D1 Diode Zener, 6.8V, 500mW SOD-123 Diodes Inc BZT52C6V8-7

1 D2 Diode Switch, 200V, 250mW S OD-123 Diodes Inc BAV21W-7-F

1 D3 Diode Switch, 75V, 200mW SOD-123 Diodes Inc 1N4148WS-7-F

1 D4 Diode Schottky, 40V, 3A SMA Diodes Inc B340A-13-F

EV6001DN-00A – MONOLITHIC FLYBACK/FORWARD DC-DC CONVERTER EV BOARD EV6001DN-00A Rev. 1.0 www.MonolithicPower.com 3 4/12/2006 MPS Proprietary Information. Unaut horized Photocopy and Duplication Prohibited. © 2006 MPS. All Rights Reserved. TM EV6001DN-00A BILL OF MATERIALS (continued) Qty Ref Value Description Package Manufacturer Part Number

1 D5 Voltage Regulator Shunt,

1.24V SOT-23 Zetex Inc ZR431LF01TA

1 D6 Diode Schottky, 30V, 200mW SOD-323 Diodes Inc B0530WS-7-F

1 FB1 Ferrite Bead, 6A, 50 Ω 1206 Steward HI1206T500R-00

1 Q1 Transistor, PNP, 40V, 300mW SOT-23 Rohm SST3906

3 R1, R12,

R14 1kΩ Film Res., 5% 603 Panasonic ERJ-3GEYJ102V 1 R2 249k Ω Film Res., 1% 603 Panasonic ERJ-3EKF2493V 1 R3 9.76k Ω Film Res., 1% 603 Panasonic ERJ-3EKF9761V 1 R4 7.5k Ω Film Res., 5% 603 Panasonic ERJ-3GEYJ752V

4 R5, R19,

R24, R25 10kΩ Film Res., 1% 603 Panasonic ERJ-3EKF1002V 1 R6 1M Ω Film Res., 5% 603 Panasonic ERJ-3GEYJ105V 1 R7 20.5k Ω Film Res., 1% 603 Panasonic ERJ-3EKF2052V 2 R8, R9 47k Ω Film Res., 5% 805 Panasonic ERJ-6GEYJ473V 1 R10 261 Ω Film Res., 1% 603 Panasonic ERJ-3EKF2610V

3 R11,

R21, R22 No Stuff Panasonic 1 R13 402 Ω Film Res., 1% 603 Panasonic ERJ-3EKF4020V 1 R15 10 Ω Film Res., 5% 805 Panasonic ERJ-6GEYJ100V 1 R16 0 Ω Film Res., 5% 603 Panasonic ERJ-3GEY0R00V 2 R17, R18 30.1k Ω Film Res., 1% 603 Panasonic ERJ-3EKF3012V 1 R20 100k Ω Film Res., 1% 603 Panasonic ERJ-3EKF1003V 1 R23 16.2 Ω Film Res., 1% 603 Panasonic ERJ-3EKF16R2V

1 T1 Flyback Transformer SMD Cooper CTX28-17489-R

1 U1 DC-DC Converter SO-8 MPS MP6001DN

1 U2 Photocoupler, 1-Ch 4-SMD Sharp PC357NT

EV6001DN-00A – MONOLITHIC FLYBACK/FORWARD DC-DC CONVERTER EV BOARD NOTICE: The information in this document is subject to change wi thout notice. Please contact MPS for current specifications. Users should warrant and guarantee that third party Intellectual Property rights ar e not infringed upon when integrating MPS products into any application. MPS will not assume any legal responsibility for any said applications. EV6001DN-00A Rev. 1.0 www.MonolithicPower.com 5 4/12/2006 MPS Proprietary Information. Unaut horized Photocopy and Duplication Prohibited. © 2006 MPS. All Rights Reserved. TM Figure 2—Bottom Layer QUICK START GUIDE 1. Connect the positive terminal of the load to VOUT pin, and the negative terminal of the load to GND pin. 2. Preset power supply output to 36V to 75V and turn off the power supply. 3. Connect the positive terminal of the power supply output to VIN pin, and the negative terminal of the power supply output to GND pin. 4. Turn power supply on and the board will automatically startup. 5. To use Enable function, apply a digital input to EN pin. Drive EN with 2.5V-5V to turn on the regulator, and drive EN less than 0.7V to turn it off.