2JCIE-EV OMRON | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 12
Technical content
Features
*1. Raspberry Pi is a registered trademark of the Raspberry Pi Foundation. *2. Arduino is a registered trademark of Arduino LLC and Arduino SRL. *3. Feather is a registered trademark of Adafruit Industries LLC. *4. For details, see External Expansion Sensor on page 3. RoHS compliant Refer to Safety Precautions on Page 9. Temperature, humidity, light, barometric pressure, noise, acceleration Can be connected to a variety of sensors (Raspberry Pi) Raspberry Pi *1, Arduino *2, Feather *3 Easily develop sensing IoT applications and PoC
- Evaluation board with six types of sensing functions. The product can be connected to a Raspberry Pi *1, Arduino *2, or Feather *3 baseboard, and enables easy sensor evaluation. The product can be connected to OMRON sensors (MEMS thermal sensor, MEMS flow sensor, Light convergent reflective sensor, air quality sensor, etc.) and Qwiic sensors. Can be connected to OMRON sensors *4 Includes a connector that supports Qwiic sensors. Six types of sensing functions OMRON sensor evaluation board Supports three platforms Platform Sample source code for acquiring sensor data is available on GitHub
Ordering Information
Supported Accessories (Sold Separately) *1. Raspberry Pi is a registered trademark of the Raspberry Pi Foundation. *2. Arduino is a registered trademark of Arduino LLC and Arduino SRL. *3. Feather is a registered trademark of Adafruit Industries LLC. *4. Boards for supported platforms are not included. *5. Do not use a model other than those listed in each table of platform supporting models. Note: The temperature sensor on the sensor evaluation board may output a high value due to heat generated by the platform. If you need to eliminate this effect, either separate the sensor from the unit by connecting a cable or otherwise, or use an external temperate/humidity sensor that supports SparkFun Qwiic. Ratings and Specifications Specifications Type Appearance Model Supported platform *4 Table of Models RP type 2JCIE-EV01-RP1 Raspberry Pi *1 3 A/1 B+/2 B/3 B/3 B+/Zero/Zero W *5 AR type 2JCIE-EV01-AR1 Arduino *2 MKR Vidor 4000/MKR WiFi 1010/MKR ZERO *5 FT type 2JCIE-EV01-FT1 Feather *3 HUZZAH32 *5 Type Model Cable harness 2JCIE-HARNESS-01 2JCIE-HARNESS-02 2JCIE-HARNESS-03 2JCIE-HARNESS-04 2JCIE-HARNESS-05 Model Item 2JCIE-EV01-RP1 2JCIE-EV01-AR1 2JCIE-EV01-FT1 Protocol Pi HAT Shield for MKR form factor FeatherWing Sparkfun Qwiic (3.3 V I2C) CN4 CN4 CN4 5V I2C for expansion CN5 CN5 CN5 TH1 TH1 TH1 5V UART for expansion CN6 CN6 CN6 5V DIO for expansion --- CN7, CN8 TH2 Sensing data that can be acquired Temperature, humidity, light, barometric pressure, noise, 3-axis acceleration Absolute maximum rating: Power voltage (5 V) -0.2 to 5.5 V Absolute maximum rating: Power voltage (3.3 V) -0.2 to 3.6 V Absolute maximum rating: Input/output terminal voltage (5 V) -0.2 to 5.2 V Absolute maximum rating: Input/output terminal voltage (3.3 V) -0.2 to 3.5 V Absolute maximum rating: Power current 700 mA Ambient storage temperature -10 to 60°C (no condensation or icing) Ambient storage humidity 30 to 85% (no condensation or icing) Recommended operating range: Power voltage (5 V) 4.75 to 5.25 V Recommended operating range: Power voltage (3.3 V) 3.14 to 3.47 V
- For details, see the terminal layouts on pages 4 to 6. Note: When using the sensor evaluation board, the accuracy indicated on the data sheet of each sensor manufacturer is not guaranteed. External Expansion Sensor *1 Note: When an external expansion sensor is connected to the sensor evaluation board, the current supply ability of the platform board may be exceeded. Consider suppling power using an external power supply. Check current supply ability in the data sheet and other literature of each platform board. When using an external power supply, check the Jumper Function information and use jumper switching. *1. We have checked the operation of typical models of each sensor. *2. For details, see the terminal layouts on pages 4 to 6. Software Access the sample source code that supports each platform from the following URL. (https://www.components.omron.com/sensor/evaluation-board/2jcie) Note: 1. The sample source code is for evaluation. OMRON does not guarantee its operation. 2. We bear no responsibility to correct mistakes or bugs in the sample source code for the purpose of changes or any other reason. 3. We cannot accept any inquiries regarding the sample source code. Part number * Sensor Model Manufacturer Interface U1 Temperature/humidity sensor SHT30-DIS-B Sensirion I2C U2 Ambient light sensor OPT3001DNP Texas Instruments I 2C U3 MEMS digital barometric pressure sensor 2SMPB-02E OMRON I 2C U5 MEMS digital motion sensor LIS2DW12 STMicroelectronics SPI U6 MEMS microphone SPH0645LM4H-B Knowles I2S Product Manufacturer Model Supported connector *2 Supported accessories (sold separately)RP type AR Type FT type MEMS Thermal sensor OMRON D6T-44L-06/-H CN5 2JCIE-HARNESS-01 D6T-8L-09/-H D6T-1A-01 D6T-1A-02 D6T-32L-01A MEMS flow sensor D6F-PH0025AD1 CN4 2JCIE-HARNESS-02D6F-PH0505AD3 D6F-PH5050AD3 D6F-10A7D-000-0 CN4 2JCIE-HARNESS-03 D6F-20A7D-000-0 D6F-50A7D-000-0 D6F-70AB7D-000-0 Light convergent reflective sensor B5W-LB2101-1 --- CN8 TH2 2JCIE-HARNESS-04 Air quality sensor B5W-LD00101-1/-2 CN7 TH2 2JCIE-HARNESS-05
Dimensions (Unit: mm) Connection (30) Four, 2.8 dia. (65) (5.9) 1.6 2JCIE-EV01-RP1 7 1 1 2 3 4 123 4 123456 V G CN4CN5 CN6 TH1 CN9 TH4 Front Back U3 U5 U6 Terminal Arrangement 2JCIE-EV01-RP1 CN9 1 3.3 VDC *1 2 5 VDC *2 3S D A *1 4N C 5S C L *1 6N C 7N C 8R X D *2 9N C 10 TXD *2
11 DIGITAL4 *1 12 BCLK *1
13 RDY *2 14 NC
15 NC 16 DIGITAL1 *1
17 NC 18 DIGITAL2 *1
19 MOSI *1 20 GND
21 MISO *1 22 DIGITAL3 *1
23 SCLK *1 24 CS *1
25 NC 26 NC
27 NC 28 NC
29 EN *2 30 NC
33 LED_SW_B *2 34 NC
35 WS *1 36 INT *1
37 INT_LIS2DW12 *1 38 MIC_OUT *1
39 GND 40 NC
BM04B-SRSS-TB (JST) 1S C L 2S D A 3 3.3 VDC 4G N D CN5 BM04B-GHS-TB (JST) 1G N D
25 V D C
3 SDA_5V
4 SCL_5V
BM06B-SRSS-TB (JST)
15 V D C
5 3.3 VDC 6N C TH1
3 SCL_5V
4S D A _ 5 V 5R D Y 6N C 7G N D TH4 19 5 VDC (Ext.)
07 GND
*1. 3.3 V terminal *2. 5.0 V terminal Temperature/humidity sensor Light sensor Barometric pressure sensor Acceleration sensor Microphone RGB LED SPI UART DIGITAL OUT or PWM CN5: Connector CN4: Connector CN6: Connector TH1: Through-hole CN9 I2S DIGITAL IN Level conversion 5V 2JCIE-EV01-RP1 I2C I2C level conversion Block Diagram 2JCIE-EV01-RP1
Dimensions (Unit: mm) Connection (6.6) 1.6 (25) 20.5 (61.5) Four, 2.3 dia. 2JCIE-EV01-AR1 1 2 3 4 1 2 3 4 1234 12345 123456 7 1 14 1 4 1 VB 14 1 G TH3CN10 CN11 TH1 TH5CN5 CN8 CN7 CN6 CN4 U3 U5 U6 Front Back Terminal Arrangement 2JCIE-EV01-AR1 CN4 BM04B-SRSS-TB (JST) 1S C L 2S D A 3 3.3 VDC 4G N D CN5 BM04B-GHS-TB (JST) 1G N D BM06B-SRSS-TB (JST)
2 RXD-B5W_OUT
3 TXD-B5W_OUT
5 3.3 VDC 6N C CN10 1N C 2D A C *2 3P M S _ I N *2
4 B5WLA01_OUT *2
5E N *2
6 B5WLA01_IN *2
7P M S _ O U T *2 8M I C _ O U T *1 9C S *1
10 INT *1
11 BCLK *1
12 WS *1
13 LED_SW_R *2
14 LED_SW_G *2
15 V D C * 2
2 VBAT *1
3 3.3 VDC *1 4G N D 5N C
6 RXD-B5W_OUT *2
7 TXD-B5W_OUT *2
8S C L *1 9S D A *1
10 MISO *1
11 SCLK *1
12 MOSI *1
14 LED_SW_B *2
BM05B-SRSS-TB (JST)
2 TXD-B5W_OUT
5 RXD-B5W_OUT
4 SDA_5V
B4B-ZR-SM4-TF (JST)
1 B5WLA01_IN
3 B5WLA01_OUT
45 V D C
2P M S _ I N 3P M S _ O U T 4G N D TH5 19 5 VDC (Ext.) *1. 3.3 V terminal *2. 5.0 V terminal 2JCIE-EV01-AR1 I2C Temperature/humidity sensor Light sensor Barometric pressure sensor Acceleration sensor Microphone RGB LED Level conversion SPI UART DIGITAL IN ANALOG IN DIGITAL I/O DAC DIGITAL OUT or PWM DIGITAL OUT CN5: Connector CN4: Connector CN6: Connector CN7: Connector TH1: Through-hole TH3: Through-hole CN8: Connector CN10 CN11 I2S Level conversion 5V DIGITAL I/O I2C level conversion Block Diagram 2JCIE-EV01-AR1
Dimensions (Unit: mm) Connection Four, 2.5 dia. 17.78 (22.86) (23.86) 45.7 (50.8) (5.9) 1.6 2JCIE-EV01-FT1 Front Back 123456 1234 1234 112 GB 116 1719 V TH5 TH1 CN11 CN10 TH2 CN5 CN6 CN4 U3 U5 U6 Terminal Arrangement 2JCIE-EV01-FT1 CN4 BM04B-SRSS-TB (JST) 1S C L 2S D A 3 3.3 VDC 4G N D CN5 BM04B-GHS-TB (JST) 1G N D BM06B-SRSS-TB (JST) 5 3.3 VDC 6N C CN10
1 VBAT *1
3 5 VDC *2
4 B5WLA01_IN *2
5 LED_SW_R *2
6 LED_SW_G *2
7 PMS_B5WLA01_
OUT *2 8W S *1 9M I C _ O U T 1 *1
10 BCLK *1
11 SCL *1
12 SDA *1
3 RXD-B5W_OUT
4 TXD-B5W_OUT
5 B5WLA01_IN
6 PMS_B5WLA01_OUT
7P M S _ I N
8 PMS_B5WLA01_OUT
4S D A _ 5 V
5 TXD-B5W_OUT
2 3.3 VDC *1 3N C 4G N D 5D A C *2
6 LED_SW_B *2
7I N T *1 8N C 9P M S _ I N *2
10 CS *1
13 MISO *1
14 TXD-B5W_OUT *2
15 RXD-B5W_OUT *2
16 EN *2
19 GND
07 5 VDC (Ext.) BV B A T *1. 3.3 V terminal *2. 5.0 V terminal 2JCIE-EV01-FT1 I2C RGB LED SPI UART DIGITAL IN DAC DIGITAL OUT CN10 CN11 I2S ANALOG IN DIGITAL I/O DIGITAL OUT Temperature/humidity sensor Light sensor Barometric pressure sensor Acceleration sensor Microphone Level conversion Level conversion I2C level conversion CN5: Connector CN4: Connector CN6: Connector TH1: Through-hole TH2: Through-hole Block Diagram 2JCIE-EV01-FT1
Dimensions (Unit: mm) 440±10 500±10 Cable harness (option) 2JCIE-HARNESS-01 440±10 500±10 2JCIE-HARNESS-02 440±10 500±10 2JCIE-HARNESS-03 440±10 500±10 2JCIE-HARNESS-04 440±10 500±10 2JCIE-HARNESS-05
Jumper Function (Power Related)
- When using an external power supply, remove the zero-ohm resist ance from JP1 and connect the zero-ohm resistance to JP2 ((1) below). Connect the power of the external power supply to the V terminal in (2) below, and connect GND to G.
- (2JCIE-EV01-AR1/FT1 only) When using an external battery, connect the battery to B and GND to G. When using a battery, a 5 V input sensor cannot be used.
- When you switch to JP2, JP1 is disabled and pow er cannot be supplied from the platform board.
- Do not connect JP1 and JP2 at the same time. How to switch by jumper
- Remove the zero-ohm resistance from JP1 by soldering arm and mount the JP2 by soldering. (Do not connect by soldering while connected to a base board or to an external power source) Jumper Function (Output Terminal) When connected, the above function is enabled. When open, the above function is disabled. JP5 and JP6 are paired and cannot both be enabled. How to switch by jumper Cut the JP6 connection location (central part) with cutters, and connect the divided parts of JP5 by soldering. Note: Give full consideration to safety when cutting the jumper. OMRON cannot bear responsibility for any injury or damage that occurs. Accessories Note: To connect this board to the corresponding platform, it must be directly soldered or the pin header or socket must be soldered. No. Positions Meaning Application Default Status JP1 Front Zero-ohm resistance When supplying power from the platform board Connected Enabled JP2 When power is supplied from an external power supply or battery (Only the 2JCIE-EV01-AR1/FT1 supports batteries) Open Disabled No. Positions Meaning Application Default Status JP5 Back (2JCIE-EV01-AR1/FT1 only) Switch by board pattern For TH1 expansion Open Disabled JP6 B5W digital output function Connected Enabled Type Model Pin socket for 2JCIE-EV01-RP1 ESQ-120-12-L-D (SAMTEC) Pin header for 2JCIE-EV01-AR1 TSW-114-07-L-S (SAMTEC) Pin socket for 2JCIE-EV01-FT1 ESQ-112-12-L-S (SAMTEC) ESQ-116-12-L-S (SAMTEC) (1) (2) 2JCIE-EV01-FT1 Layout
Read the following to ensure safe use. The safety precautions that are provided are extremely important to safety. Always read and heed the information provided in all safety precautions. Explanation of safety symbols
- Do not incorporate this product in a product, regardless of the application.
- This product is not a measuring instrument. Do not use for purposes such as sensor output value measurement and diagnosis.
- When disposing of the product, follow local rules and regulations.
- Keep out of the hands of small children when using and storing the product. If a small part is swallowed, immediately consult a physician.
- If you notice a strange odor or smoke coming from the product, or other abnormal condition, immediately shut off the power and consult your dealer.
- Do not handle this product with y our bare hands. Risk of minor injury from the packaging box and edge of the board.
- Do not connect the indicated termi nals or power not listed in this manual. Check the rating of each terminal, and do not use a current or voltage that exceeds the rating.
- This product is not waterproof. Do not use in an environment where water, oil, or chemicals may splash on the product. Do not wash with water or by ultrasound, and do not touch with wet hands.
- Do use an air blower. This may damage the sensor.
- Do not disassemble or modify the product.
- Do not grasp the product with excessive force, swing it around, or treat it roughly. Risk of product failure and injury.
- Do not use in an environment wher e corrosive, flammable, or explosive gases are present.
- Treat the measured values acquired by this product as reference values.
- Do not connect this product to other than one of the models listed in each table of platform supporting models.
- The pin headers and sockets below are recommended for this product. For insertion/removal counts, refer to the latest data sheet / reliability test results for each pin header or socket. 2JCIE-EV01-RP1: ESQ-120-12-L-D 2JCIE-EV01-AR1: TSW-114-07-L-S 2JCIE-EV01-FT1: ESQ-112-12-L-S ESQ-116-12-L-S
- When this product is connected to any of the platforms, heat and other effects from the platform will cause the output of the product to change. Check these effects sufficiently before using the product
- Check, understand, and consider t he installation location of each sensor before using the product. Do not use with the area around each sensor in a sealed state.
- This is a precision product. Ex ercise caution when handling. Dropping the packing box or the unit, or subjecting the unit and its terminals to intense shock may result in product failure.
- Do not use or store the produc t in a high-temperature or high- humidity location, a location exposed to long hours of direct sunlight, or in a vehicle. Sudden changes of ambient temperature may cause internal condensation that results in malfunctioning.
- Do not use or store in a location with dust, salt, or iron powder. Dust or other contaminants may collect in or on the product and cause failure.
- Do not use in a location with intense static electricity or electromagnetic waves. Risk of product failure. CAUTION Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury, or property damage. Precautions for Safe Use Precautions on what to do and what not to do to ensure safe usage of the product. Precautions for Correct Use Precautions on what to do and what not to do to ensure proper operation and performance. CAUTION Precautions for Correct Use Precautions for Correct Use
Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of a week from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABL Y MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http://www.omron.com/global/ or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY , NEGLIGENCE OR STRICT LIABILITY . Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS PROPERL Y RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions.
Please check each region's Terms & Conditions by region website. OMRON Corporation Electronic and Mechanical Components Company Regional Contact Cat. No. A297-E1-02 1019 (0719) Americas Europe Asia-Pacific China Korea Japan In the interest of product improvement, specifications are subject to change without notice. © OMRON Corporation 2019 All Rights Reserved.