EU1DG GULFSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Rev.A1 www.gulfsemi.com EU1DG ULTRAFAST EFFICIENT PLASTIC SILICON RECTIFIER VOLTAGE: 200V CURRENT: 1.0A FEATURE DO-41\\DO-204AL Low power loss High surge capability Glass passivated chip junction Ultra-fast recovery time for high efficiency High temperature soldering guaranteed 250 ℃/10sec/0.375 ″lead length at 5 lbs tension MECHANICAL DATA Terminal ：Plated axial leads solderable per MIL-STD 202E, method 208C Case ：Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity ：color band denotes cathode Mounting position：any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half wave, 60HZ, resistive or inductive load rating at 25 °C, unless otherwise stated) SYMBOL EU1DG units Maximum Recurrent Peak Reverse Voltage Vrrm 200 V Maximum RMS Voltage Vrms 140 V Maximum DC blocking Voltage Vdc 200 V Maximum Average Forward Rectified Current 3/8”lead length at Ta =55 °C If(av) 1.0 A Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Ifsm 30 A Maximum Forward Voltage at rated Forward Current and 25 °C Vf 1.1 V Maximum full load reverse current full cycle average at 55 °C Ambient Ir(av) 50 µA Maximum DC Reverse Current Ta =25 °C at rated DC blocking voltage Ta =125 °C Ir 10.0 100.0 µA µA Maximum Reverse Recovery Time (Note 1) Trr 50 nS Typical Junction Capacitance (Note 2) Cj 17 pF Typical Thermal Resistance (Note 3) Rth(ja) 50 °C Storage and Operating Temperature Range Tstg, Tj -55 to +150 °C Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 3. Thermal Resistance from Junction to Ambient at 3/8”lead length, P.C. Board Mounted
Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES EU1DG