ETMA-30W CUI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

cui.com date 07/10/2015 page 1 of 4 SERIES: ETMA 30W │ DESCRIPTION: MEDICAL AC-DC POWER SUPPLY MODEL output voltage output current output power ripple and noise1 efficiency level (Vdc) max (A) max (W) max (mVp-p) ETMA050400UD 5 4 20 50 V ETMA090300UD 9 3 27 90 V ETMA120250UD 12 2.5 30 120 V ETMA150200UD 15 2 30 150 V ETMA180165UD 18 1.65 30 180 V ETMA240125UD 24 1.25 30 240 V 1. at full load, 100 ~ 240 Vac input, 20 MHz bandwidth oscilloscope, each output terminated with a 10 µF aluminum electrolytic and 0.1 µF ceramic capacitors.

FEATURES

  • up to 30 W power
  • universal input (90~264 Vac)
  • single regulated output from 5~24 Vdc
  • over voltage and short circuit protections
  • full medical safety approvals
  • level V efficiency
  • custom designs available PART NUMBER KEY ETMA050400UD - XX - IC - CXX DC Plug Type: See output plug options on page 3 for more details Factory Designation Base Number example of 5 Vdc, 4 A Reserved for Custom Configurations For more information, please visit the product page | For information on related products, view Dc Power Jacks

cui.com date 07/10/2015 │ page 2 of 4CUI Inc │ SERIES: ETMA 30W │ DESCRIPTION: MEDICAL AC-DC POWER SUPPLY INPUT parameter conditions/description min typ max units voltage 90 264 Vac frequency 47 63 Hz input current 0.6 A inrush current at 240 Vac 50 A no load power consumption 0.3 W OUTPUT parameter conditions/description min typ max units line regulation1 ±1 % load regulation2

5 Vdc output

9 Vdc output

12, 15 Vdc outputs 18, 24 Vdc outputs voltage accuracy ±2 % hold-up time at 115 Vac 16 ms switching frequency 70 kHz temperature coefficient ±0.05 %/°C Note: 1. measured from 100 ~ 240 Vac, full load 2. measured from 60% to full load and from 60 ~ 20% load (60% ±40% load) PROTECTIONS parameter conditions/description over voltage protection TVS component to clamp short circuit protection continuous, auto restart SAFETY & COMPLIANCE parameter conditions/description min typ max units isolation voltage input to output 5,656 Vdc safety approvals IEC 60601-1, EN 60601-1, UL 60601-1 EMI/EMC EN 55011, EN 60601-1-2, EN 61000-3-(2,3) MTBF as per MIL-HDBK-217F, 115 Vac, 25 °C 300,000 hours RoHS 2011/65/EU ENVIRONMENTAL parameter conditions/description min typ max units operating temperature 0 40 °C storage temperature -20 85 °C humidity non-condensing 93 % For more information, please visit the product page | For information on related products, view Dc Power Jacks

cui.com date 07/10/2015 │ page 3 of 4CUI Inc │ SERIES: ETMA 30W │ DESCRIPTION: MEDICAL AC-DC POWER SUPPLY DC OUTPUT PLUG OPTIONS / DC CORD MECHANICAL DRAWING 50 0.5 110 0.5 LED 30 0.5 cord length MODEL NO. CABLE GAUGE CORD LENGTH ETMA050400UD 18 AWG 720 mm ±50 ETMA090300UD 18 AWG 1,220 mm ±50 ETMA120250UD 18 AWG 1,800 mm ±50 ETMA150200UD 18 AWG 1,800 mm ±50 ETMA180165UD 18 AWG 1,800 mm ±50 ETMA240125UD 18 AWG 1,800 mm ±50 MECHANICAL parameter conditions/description min typ max units dimensions 110 x 50 x 30 (4.331 x 1.969 x 1.181 inch) mm input plug IEC320 / C8 weight 220 g units: mm A B C Unit P5/P5R 5.5 2.1 9.5 mm P6/P6R 5.5 2.5 9.5 mm ł ń Ń ł Ń ń Right Angle PXRStandard PX Stripped and Tinned *Tip positive ø3.5 +0/-0.1 14±0.5 ø3.5 +0/-0.1 14±0.5 A C B A B C D C A B C C A B A B P1RP1 Right Angle PXRStandard PX Right Angle PXXR ST Stripped and Tinned PXX X X Standard PXX N = Center Negative Plug Polarity: “Blank” = N/A P = Center Positive Plug Angle: “Blank” = Standard R = Right Angle Plug Type DC PLUG TYPE EIAJ Plugs Locking DC Plug Standard DC Plug 3.5 mm Phono Plug 25±5 9±2 *Contact CUI for additional output plug options. For more information, please visit the product page | For information on related products, view Dc Power Jacks

date 07/10/2015 │ page 4 of 4CUI Inc │ SERIES: ETMA 30W │ DESCRIPTION: MEDICAL AC-DC POWER SUPPLY This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CUI offers a one (1) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com techsupport@cui.com rev. description date 1.0 initial release 12/02/2011 1.01 updated P7/P7R B dimension 03/23/2012

1.02 V-Infinity branding removed 08/21/2012

1.03 updated datasheet 07/10/2015 The revision history provided is for informational purposes only and is believed to be accurate.

REVISION HISTORY

For more information, please visit the product page | For information on related products, view Dc Power Jacks