ETC4-1-8 MA-COM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
- 1:4 Impedance Ratio
- CT on Secondary
- Surface Mount
- Tape and reel packaging available
Description
M/A-COM’s ETC4-1-8 is a 4:1 RF transmission line step-up transformer in a low cost, surface mount package. Ideally suited for high volume cellular and wireless applications. Typical applications include single to balanced mode conversion and impedance matching. Parts are packaged in tape & reel.
Ordering Information
ETC4-1-8TR Tape and Reel (2000 piece Reel) Electrical Specifications: TA = 25°C, Z0 = 50Ω 1 Parameter Test Conditions Frequency Units Min Typ Max RF Frequency — 20 - 350 MHz — — — Insertion Loss FL—f U 20 - 350 50 - 200 dB — 3.0 2.0 Amplitude Unbalance FL—f U 20 - 350 dB — — 0.5 Phase Unbalance FL—f U 20 - 350 Degrees — — 5 Absolute Maximum Ratings 1 1. Operation of this device abov e any one of these parameters may cause permanent damage. Parameter Absolute Maximum RF Power 250 mW DC Current 100 mA Operating Temperature -40°C to +85°C Storage Temperature -55°C to +125°C
E-Series RF 1:4 Transformer 2 0 – 3 5 0 M H z V 1 ETC4-1-8 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Pin Configuration Pin No. Function