ETC16-1T-2TR MA-COM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
- 1:16 Impedance Ratio
- CT on Secondary
- Surface Mount
- Tape and reel packaging available
- 260°C Reflow Compatible
Description
M/A-COM’s ETC16-1T-2TR is a 1:16 RF transformer in a low cost, surface mount package. Ideally suited for high volume cellular and wireless applications. Typical applications include single to balanced mode conversion and impedance match- ing. The ETC16-1T-2TR is available in a SM-22 surface mount package. Parts are packaged in tape & reel. Product Image Absolute Maximum Ratings Parameter Absolute Maximum RF Power 250 mW DC Current 240 mA2 Operating Temperature -40°C to +85°C Storage Temperature -55°C to +125°C 1. Exceeding any one or combination of these limits may cause perma- nent damage to this device.
Ordering Information
ETC16-1T-2TR Tape and Reel (2000 piece Reel) Electrical Specifications: TA = 25°C, Z0 = 50Ω Parameter Test Conditions Frequency Units Min Typ Max RF Frequency — 5 - 40 MHz — — — Insertion Loss — 5 - 40 dB dB — — 1.0 0.8 Amplitude Imbalance — 5 - 40 dB — — 0.3 Phase Imbalance — 5 - 40 Degrees — — 3 Schematic Pin Configuration Pin No. Function
1 Secondary
2 Secondary CT
3 Secondary Dot
4 Primary Dot
5 Primary
E-Series RF 1:16 Transformer 5-40 MHz M/A-COM Products Advanced - Rev. V2 ETC16-1T-2TR Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. ∗ Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified. WEIGHT: 1 gram (0.04 oz.) max Insertion Loss Amplitude Balance Phase Balance Input Return Loss -0.8 -0.6 -0.4 -0.2 5 1 01 52 02 53 03 54 0 MHz dB -0.08 -0.06 -0.04 -0.02 0.02 0.04 51 01 52 02 53 03 54 0 MHz dB -180 -179.9 -179.8 -179.7 -179.6 -179.5 -179.4 5 1 01 52 02 53 03 54 0 MHz Degree -40 -30 -20 -10 5 1 01 52 02 53 03 54 0 MHz dB