ETC1-1T MA-COM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
- 1:1 Impedance Ratio
- CT on Secondary
- Surface Mount
- Tape and reel packaging available
Description
M/A-COM’s ETC1-1T is a 1:1 RF flux coupled transformer in a low cost, surface mount package. Ideally suited for high volume applications. Parts are packaged in tape & reel.
Ordering Information
ETC1-1TTR Tape and Reel (2000 piece Reel) Electrical Specifications: TA = 25°C, Z0 = 50Ω 1 Parameter Test Conditions Frequency Units Min Typ Max RF Frequency — 3 - 200 MHz — — — Insertion Loss — 3 - 200 dB — — 1.5 Amplitude Imbalance — 3 - 50 3 - 200 dB dB 0.1 0.5 Phase Imbalance — 3 - 50 3 - 200 Degrees Degrees 1.0 5.0 Input Return Loss — 3 - 200 5 - 120 dB dB 10.0 15.0 Absolute Maximum Ratings 1 1. Operation of this device abov e any one of these parameters may cause permanent damage. 2. The maximum DC current applies to the secondary center tap in applications where the secondary is balanced. Parameter Absolute Maximum RF Power 250 mW DC Current 240 mA2 Operating Temperature -40°C to +85°C Storage Temperature -55°C to +125°C
E-Series RF 1:1 Flux Coupled Transformer 3 – 200 MHz ETC1-1T V10 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Pin Configuration Pin No. Function
1 Secondary
2 Secondary CT
3 Secondary Dot
4 Primary Dot
5 Primary
Typical Performance Curves Insertion Loss Amplitude Imbalance Primary Dot 4 -0.9 -0.8 -0.7 -0.6 -0.5 -0.4 -0.3 -0.2 -0.1 0.0 Frequency (MHz) dB -35.0 -30.0 -25.0 -20.0 -15.0 -10.0 Freq (MHz) dB 175 177 179 181 183 185 0 50 100 150 200 Freq (MHz) Degrees -0.25 -0.20 -0.15 -0.10 -0.05 0.00 0.05 Freq (MHz) dB