ETC1-1T-5_1 MACOM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
- 1:1 Impedance Ratio
- Surface Mount
- Tape and reel packaging available
Description
M/A-COM’s ETC1-1T-5 is a 1:1 RF transformer in a low cost, surface mount package. Typical applications include single to balanced mode conversion and impedance matching. Parts are packaged in tape & reel.
Ordering Information
ETC1-1T-5TR Tape and Reel (2000 piece Reel) Electrical Specifications: TA = 25°C, Z0 = 50Ω 1 Parameter Test Conditions Frequency Units Min Typ Max RF Frequency — 2 - 500 MHz — — — Insertion Loss — 2 - 300 2 - 500 dB — — 1.0 2.0 Amplitude Imbalance — 2 - 300 2 - 500 dB dB 0.3 0.6 Phase Imbalance — 2 - 300 2 - 500 Degrees Degrees 2.0 5.0 Absolute Maximum Ratings 1 1. Operation of this device above any one of these parameters may cause permanent damage. 2. The maximum DC current applies to the secondary center tap in applications where the secondary is balanced. Parameter Absolute Maximum RF Power 250 mW DC Current 240 mA2 Operating Temperature -40°C to +85°C Storage Temperature -55°C to +125°C
E-Series RF 1:1 Transformer 2 – 500 MHz ETC1-1T-5 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information.
- North America Tel: 800.366.2266 / Fax: 978.366.2266 Visit www.macom.com for additional data sheets and product information. Pin Configuration Pin No. Function