ETC1-1T-2TR MA-COM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
1:1 Impedance Ratio Surface Mount Tape and reel packaging available
Description
M/A-COM’ s ETC1-1T-2 is a 1:1 RF transformer in a low cost, surface mount package. Typical applications include single to balanced mode conversion and impedance matching. Parts are packaged in tape & reel. Pin Configuration Pin No. Function
1 Secondary
2 Secondary CT
3 Secondary Dot
4 Primary Dot
5 Primary
Dimensions are inches (millimeters) ± 0.015 (0.38) unless otherwise specified. Schematic Product Image
Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. E-Series RF 1:1 Transformer 0.1 – 200 MHz Rev. V1 Absolute Maximum Ratings 1 1. Operation of this device above any one of these parameters may cause permanent damage. Parameter Absolute Maximum RF Power 250 mW DC Current 30 mA Operating Temperature -40° C to +85° C Storage Temperature -55° C to +125° C Electrical Specifications: TA = 25° C, Z0 = 50 Parameter Test Conditions Frequency Units Min Typ Max RF Frequency — 0.1 - 200 MHz — — — Insertion Loss — 0.1 - 200 dB — 0.3 1.5 Amplitude Imbalance — 0.1 - 200 dB — — 0.5 Phase Imbalance — 0.1 - 200 Degrees — — 5°
Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. E-Series RF 1:1 Transformer 0.1 – 200 MHz Rev. V1 Typical Performance Curves Insertion Loss Phase Unbalance Amplitude Unbalance
Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. E-Series RF 1:1 Transformer 0.1 – 200 MHz Rev. V1 Tape & Reel Information
Ordering Information
Ao 4.00mm +/-0.1mm Bo 4.00mm +/-0.1mm Ko 2.9mm +/-0.1mm W 12.00mm +/-0.3mm P1 8.00mm +/-0.1mm Part Number Package ETC1-1T-2TR 2000 piece reel 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts.