ETC1-1T-2 MACOM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
- 1:1 Impedance Ratio
- Surface Mount
- Tape and reel packaging available
Description
M/A-COM’s ETC1-1T-2 is a 1:1 RF transformer in a low cost, surface mount package. Typical applications include single to balanced mode conversion and impedance matching. Parts are packaged in tape & reel.
Ordering Information
ETC1-1T-2TR Tape and Reel (2000 piece Reel) Electrical Specifications: TA = 25°C, Z0 = 50Ω 1 Parameter Test Conditions Frequency Units Min Typ Max RF Frequency — 0.05 - 3 MHz — — — Insertion Loss — 0.05 - 3 0.2 - 3 dB dB 2.0 1.0 Amplitude Imbalance — 0.05 - 3 0.2 - 3 dB dB 0.2 0.1 Phase Imbalance — 0.05 - 3 0.2 - 3 Degrees Degrees Absolute Maximum Ratings 1 1. Operation of this device above any one of these parameters may cause permanent damage. Parameter Absolute Maximum RF Power 250 mW DC Current 30 mA Operating Temperature -40°C to +85°C Storage Temperature -55°C to +125°C
E-Series RF 1:1 Transformer 0.05 – 3 MHz ETC1-1T-2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information.
- North America Tel: 800.366.2266 / Fax: 978.366.2266 Visit www.macom.com for additional data sheets and product information. Schematic Pin Configuration Pin No. Function