ETC1-1-13 MA-COM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
- 1:1 Impedance ratio
- Surface mount
- Tape and reel packaging available
Description
M/A-COM’s ETC1-1-13 is a 1:1 RF transmission line transformer in a low cost, surface mount package. Ideally suited for high volume cellular and wireless application. Parts are packaged in tape & reel Pin No. Function
1 Secondary Dot
2 Not Connected
3 Secondary
4 Primary
5 Primary Dot
∗ Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified. Schematic
E-Series RF 1:1 Transmission Line Transformer 4.5 - 3000 MHz Rev. V7 ETC1-1-13TR Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Electrical Specifications: T A = 25°C, V HIGH = 3.0 V, V LOW = 0 V, Z0 = 50 Ω 1 1. External DC blocking capacitors are required on all RF ports (39 pF capacitors are recommended). † Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. Parameter Test Conditions Units Min Typ Max RF Frequency 4.5 - 3000 MHz - - - Insertion Loss 4.5 - 1000 1000 - 2000 2000 - 3000 dB dB dB 0.32 1.0 2.0 3.5 Amplitude Unbalance 4.5 - 1000 dB - - 1.0 Phase Unbalance 4.5 - 1000 Degrees - - 20 Test Conditions Absolute Maximum Ratings 2.3 Parameter Absolute Maximum DC Power 250mW DC Current 30mA Operating Temperature -55°C to +85°C Storage Temperature -55°C to +125°C 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits.
E-Series RF 1:1 Transmission Line Transformer 4.5 - 3000 MHz Rev. V7 ETC1-1-13TR Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Insertion Loss Input Impedance Typical Performance Curves Phase Unbalance Amplitude Unbalance
E-Series RF 1:1 Transmission Line Transformer 4.5 - 3000 MHz Rev. V7 ETC1-1-13TR Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Tape & Reel Information
Ordering Information
Ao 4.00mm +/-0.1mm Bo 4.00mm +/-0.1mm Ko 2.9mm +/-0.1mm W 12.00mm +/-0.3mm P1 8.00mm +/-0.1mm Part Number Package ETC1-1-13TR 2000 piece reel 4. Reference Application Note M513 for reel size information. 5. All sample boards include 5 loose parts.