ETC1-1-10 MA-COM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

  • 1:1 Impedance Ratio
  • Surface Mount
  • Tape and reel packaging available

Description

M/A-COM’s ETC1-1-10 is a 1:1 RF transmission line transformer in a low cost, surface mount package. Ideally suited for high volume cellular and wireless applications. Parts are packaged in tape & reel.

Ordering Information

ETC1-1-10TR Tape and Reel (2000 piece Reel) Electrical Specifications: TA = 25°C, Z0 = 50Ω 1 Parameter Test Conditions Frequency Units Min Typ Max RF Frequency — 1710 - 1910 MHz — — — Insertion Loss FL—f U 1710 - 1910 dB — — 2.0 Amplitude Unbalance — 1710 - 1910 dB — — 2.0 Phase Unbalance — 1710 - 1910 Degrees — — 10° Absolute Maximum Ratings 1 1. Operation of this device abov e any one of these parameters may cause permanent damage. Parameter Absolute Maximum DC Power 250 mW DC Current 30 mA Operating Temperature -40°C to +85°C Storage Temperature -55°C to +125°C

E-Series RF 1:1 Transformer 1 7 1 0 – 1 9 1 0 M H z V 1 ETC1-1-10 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Pin Configuration Pin No. Function

1 Secondary Dot

2 Not Connected

3 Secondary

4 Primary

5 Primary Dot

Typical Performance Curves Insertion Loss Amplitude Unbalance