ET01LD1V31QE

ET01MD1SAPE CK-COMPONENTS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

F–25 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com FToggle ET Series Sealed Subminiature Toggle Switches Features/Benefits

• Sealed against solder and cleaning process contaminants
• ESD protection available
• Thru-hole and surface mount models
• Compact size and small footprint save PCB space
• RoHS compliant models available Typical Applications
• Hand-held telecommunications
• Instrumentation
• Medical equipment Specifications CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or DC max. See page F-35 for additional ratings. ELECTRICAL LIFE: ETX1 models: 60,000 make-and-break cycles at full load. All other models: 30,000 cycles. CONTACT RESISTANCE: Below 20 m Ω typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109 Ω min. ELECTROSTATIC DISCHARGE (ESD) RESISTANT OPTION: M3 & S3 insulating actuator only: 9,000 V DC min. @ sea level, actuator to terminals. F1 conductive bushing only: Dissipates up to 20,000 V DC from actuator to ground. M3 & S3 actuator and F1 bushing options are not recommended for use together. DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level. OPERATING TEMPERATURE: –30ºC to 85ºC. SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging). DEGREE OF PROTECTION: IP57; Protection against harmful dust deposit, full-scale voltage protection, temporary immersion. PACKAGING: Surface mount switches are shipped in tape and reel packaging, see page F-31 for drawings and reel information. Materials CASE & BUSHING: Glass filled nylon 6/6, flame retardant, heat stabilized (UL 94V-0) or glass filled 4/6 nylon, flame retardant, heat stabilized (UL 94V-0). F1 conductive bushing option is impregnated with carbon fibers. ACTUATOR: M3 & S3 anti-static actuator: Nylon 4/6, black standard (UL 94V-0). All other actuators: Brass, chrome plated. Internal o-ring seal standard with all actuators. SWITCH SUPPORT: Brass, tin plated. CONTACTS & TERMINALS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Copper alloy, silver plated. See F-35 for additional contact materials. TERMINAL SEAL: Epoxy. NOTE: Any models supplied with Q, B, G, P or R contact material ar e RoHS compliant and compatible. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages F–26 thru F–31. For additional options not shown in catalog, consult our Customer Service Center. All models are process sealed to withstand machine soldering temperatures and pressure wash cleaning methods. Switch Function ET01 SP, On-None-On ET02 SPST, Off-None-On ET03 SP, On-Off-On ET05 SP, Mom.-Off-Mom. ET07 SP , On-Off-Mom. ET08 SP , On-None-Mom. ET21 DP , On-None-On ET23 DP , On-Off-On ET24 DP , On-On-On ET25 DP, Mom.-Off-Mom. ET27 DP, On-Off-Mom. ET28 DP, On-None-Mom. Actuator M .240" high M3 Plastic, anti-static, .240" high S .400" high L .320" high S1 .540" high Terminations A Right angle, PC thru-hole AV Vertical right angle, PC thru-hole C PC Thru-hole SA Right angle, surface mount SA1 Right angle, surface mount rear-facing V3 Vertical mount, V-bracket AV3 Vertical right angle, snap-in, PC thru-hole V31 Vertical mount, V-bracket, snap-in W Wire wrap Bushing D1 .177" High, Unthreaded F1 .177" high, unthreaded, ESD conductive Contact Material B Gold P Gold, matte tin Q Silver S Silver/matte-tin G Gold over silver R Gold over silver, matte-tin Seal E Epoxy Plastic Actuator Color NONE No actuator color

2 Black

1 White

F–26 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com FToggle ET Series Sealed Subminiature Toggle Switches SWITCH FUNCTION DPDT 2-1,5-4 2-1,5-4 2-1,5-4 2-1,5-4 N/A OPEN N/A 2-3,5-4 2-3,5-6 2-3,5-6 2-3,5-6 2-3,5-6 ON NONE ON ON OFF ON MOM. OFF MOM. ON OFF MOM. ON NONE MOM. ON ON ON ET21 ET23 ET25 ET27 ET28 ET24 DP SPDT SPST 2-1 2-1 2-1 3-1 N/A OPEN N/A N/A 2-3 2-3 2-3 OPEN ON NONE ON ON OFF ON MOM. OFF MOM. ON OFF MOM. ON NONE MOM. OFF NONE ON ET01 ET03 ET05 ET07 ET08 ET02 SP SCHEMATIC CONNECTED TERMINALS POS. 1 POS. 2 POS. 3 SWITCH FUNCTION POS. 1 POS. 2 POS. 3 MODEL NO. NO. POLES Terminal Nos. For Reference Only Terminal Nos. For Reference Only DPDT SPDT Part number shown: ET01MD1CBE ET02 Models: Omit terminal 2 Part number shown: ET21MD1CBE MOM. = Momentary All models with all options (except M3 actuator) when or dered with G, L, R or Q contact material except with F1 conductive bushing. Wiring for 3-way switch, see Section N. C&K marking on opposite sideC&K marking on opposite side

F–27 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com FToggle ET Series Sealed Subminiature Toggle Switches ACTUATOR BUSHING TERMINATIONS SP DP ET02 – omit center hole. PC MOUNTING SP DP SP DP (NONE) BLACK (M3 & S3 only)

1 WHITE (M3 & S3 only)

M .240" HIGH C PC THRU-HOLE W WIRE WRAP S1 .540" HIGH D1 .177" HIGH, UNTHREADED F1 ESD, CONDUCTIVE BUSHING UNTHREADED, .177" HIGH F1 bushing is not UL/CSA appr oved M3 PLASTIC, ANTISTATIC, .240" HIGH S .400" HIGH L .320" HIGH NOTE: ESD protection depends on proper grounding of switch support bracket. F1 conductive bushing option is impregnated with carbon fibers; dissipates electrostatic discharge (ESD) up to 20,000 V from actuator to ground. Available with all metal actuator options and A, AV, AV3, V3 and V31 termination options only. Internal actuator o-ring seal standard. Material: Nylon 4/6 (UL 94V-0), black standard. Static resistance: 9,000 V DC min. @ sea level, actuator to terminals. Not available with F1 conductive bushing option. Not UL approved. NOTE: All actuators have chrome finish (except M3 & S3 ). Standard with A, AV, V3 & V31 terminations. Not available with F1 conductive bushing. Not available with F1 conductive bushing. Standard with C or W terminations. SP and DP SP and DP ACTUATOR COLOR

F–28 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com FToggle ET Series Sealed Subminiature Toggle Switches TERMINATIONS Actuator Shown In Pos. 1 PC MOUNTING Actuator Shown In Pos. 1 PC MOUNTING Actuator Shown In Pos. 1 PC MOUNTING Actuator Shown In Pos. 1 PC MOUNTING ET01MD1ABE Horizontal Actuation SPDT ET21MD1ABE Horizontal Actuation DPDT ET01MD1AVBE Vertical Actuation SPDT ET21MD1AVBE Vertical Actuation DPDT Not available with ET02 model. ET02 - omit terminal 2. NOTE: Terminal bend radii and lead-in manufacturing option. NOTE: Terminal bend radii and lead-in manufacturing option. A RIGHT ANGLE, PC THRU-HOLE A RIGHT ANGLE, PC THRU-HOLE AV VERTICAL RIGHT ANGLE, PC THRU-HOLE AV VERTICAL RIGHT ANGLE, PC THRU-HOLE

F–29 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com FToggle .079 TYP. (2,0) .200 (5,08) .051 (1,30) .032 TYP. (0,80) .272 (6,90) .059 (1,50) .071 TYP. (1,80) .100 (2,54) .041 (1,04) .020 TYP (0,51) .403 (10,24) .276 (7,0) .121 (3,07) .059 (1,50) .403 (10,24) ø.181 (4,60) .217 (5,51) .234 (5,94) (2,51Ø) ø.099 .354 (9,00) .171 (4,35)EPOXY SEAL ET Series Sealed Subminiature Toggle Switches TERMINATIONS Actuator Shown In Pos. 1 PC MOUNTING Actuator Shown In Pos. 1 PC MOUNTING Actuator Shown In Pos. 1 ET02 Models: Omit terminal 2 V31 Snap-In ET02 Models: Omit center hole. PC MOUNTING ET01SD1AV2BE Vertical Actuation SPDT ET01M3D1SAPE Horizontal Actuation SPDT Only ET01MD1V3BE SPDT AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE SA RIGHT ANGLE, SURFACE MOUNT V3 VERTICAL MOUNT, V-BRACKET V31 VERTICAL MOUNT, V-BRACKET, SNAP-IN Not available with S and S1 actuators. Standar d with tape & reel packaging, See page F-31. ET01M3D1SA1BE Horizontal Actuation SPDT Only SA1 RIGHT ANGLE, SURFACE MOUNT Not available in ET02 . Actuators M and M3, bushing D1, contact material B. Standard with tape and reel packaging-see page F-31

F–30 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com FToggle ET Series Sealed Subminiature Toggle Switches CONTACT MATERIAL SEAL AVAILABLE HARDWARE .338 (8,59) * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. 1 CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate. 2 END CONTACTS: Coin silver, with gold plate over nickel plate. 3 CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate over nickel plate. 4 END CONTACTS: Coin silver, silver plated. 5 CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated. 6 TERMINALS: Copper alloy, with matte tin over nickel plate. NOTE: Any models supplied with Q, B , G, P or R contact material are RoHS compliant. All models with all options (except M3 actuator) when ordered with G, L, R or Q contact material except with F1 conductive bushing. E EPOXY SEAL Cap PART NO.

706201000 WHITE

706202000 BLACK

706203000 RED

Material: Vinyl Finish: Matte NOTE: Other colors available, consult Customer Service Center. Actuator Shown In Pos. 1 PC MOUNTING ET21MD1V3BE DPDT V3 VERTICAL MOUNT, V-BRACKET TERMINATIONS OPTION CODE CONTACT MATERIAL TERMINAL PLATING SILVER 5 MATTE-TIN 6 GOLD 1 SILVER 4,5 GOLD OVER SILVER 2,3 GOLD 3 MATTE-TIN 6 GOLD 1 MATTE-TIN 6 LOW LEVEL/DRY CIRCUIT POWER LOW LEVEL/DRY CIRCUIT OR POWER 0.4 VA MAX. @ 20 V AC OR DC MAX. ETX1 MODELS:

3 AMPS @ 120 V AC OR 28 V DC

ALL OTHER MODELS:

2 AMPS @ 120 V AC OR 28 V DC

ETX1 MODELS: 0.4 VA MAX. @ 20 V AC OR DC MAX. OR 3 AMPS @ 120 V AC OR 28 V DC ALL OTHER MODELS: 0.4 VA MAX. @ 20 V AC OR DC MAX. OR 2 AMPS @ 120 V AC OR 28 V DC B P Q S G R RATINGS

F–31 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com FToggle ET Series Sealed Subminiature Toggle Switches TAPE & REEL For part number ET01M3D1SAKE OUTSIDE DIAMETER 13.00 (330,0) PILOT HOLE .512 (13,0) QUANTITY PER REEL 600 REEL INFORMATION 0.079 (2,0) 0.157 (4,0) 0.630 (16,00) 0.069 (1,75) 1.732 (44,0) 0.795 (20,2) ø 0.059 (1,50) 0.996 (25,30) 0.014 (0,35) 0.297 (7,55) FEED DIRECTION For part number ET01M3D1SA1BE OUTSIDE DIAMETER 13.00 (330,0) PILOT HOLE .795 (20,20) QUANTITY PER REEL 500 REEL INFORMATION