ESRH181M02R CDE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type ESRH Solid Polymer Aluminum SMT Capacitors Solid Polymer Aluminum capacitors are now available with a +125ºC temperature rating. CDE’s type ESRH capacitors are rated at +125ºC for 1000 hours when operated at 3/4 of the 105ºC rated voltage. Solid Polymer Aluminum electrolytic capacitors feature extremely low ESR which yields a capacitor with very low high frequency impedance and high ripple current capability. When low ESR is your requirement, one type ESRH capacitor can replace three or more tantalum or aluminum electrolytic capacitors. The solid electrolyte in a polymer aluminum capacitor results in a long (and ignition free) life, and the 7.3 x 4.3 footprint is compatible with “D” case solid tantalum capacitors. Specifications Markings

Ordering Information

Operating Temperature Range: Capacitance Tolerance: Dissipation Factor (DF): Surge Voltage: DC Leakage Current (after 2 minutes): -55 ºC to +105 ºC at rated voltage (+125 ºC at .75 x rated voltage) ±20% at 120 Hz and +20 ºC ≤0.10 at 120 Hz and +20 ºC 1.25 x rated voltage I ≤ .1 CV ESRH 101 M 08 R Packaging Code CDE Type Capacitance Code Capacitance Tolerance WVDC Code R = Tape & Reel 2000 pcs/reel 02 =2.0 Vdc 06 = 6.3 Vdc 680 = 68 µF M = ±20% 0E =2.5 Vdc 08 = 8.0 Vdc 101 = 100 µF 04 =4.0 Vdc D = 2.0V J = 6.3V E = 2.5V K = 8.0V G = 4.0V Polarity Stripe (Anode) W.V. Code Lot Code Capacitance (“R” = Decimal Point)

Type ESRH Solid Polymer Aluminum SMT Capacitors CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Low E.S.R. and High Temperature Outline Drawing Ratings *12mm wide tape — 13” diameter reel Capacitance (µF) Rated Voltage WVDC Catalog Maximum Ripple Current Part Number E.S.R. at 100 kHz H ±0.2 Tape* and Reel 100 kHz/20 ºC +20 ºC to + 125 ºC (mm) (2000 pcs/reel) (Ω) (Arms) 180 2.0 ESRH181M02R 0.015 2.5 2.8 150 2.5 ESRH151M0ER 0.015 2.5 2.8 120 4.0 ESRH121M04R 0.015 2.5 2.8 100 6.3 ESRH101M06R 0.015 2.5 2.8 68 8.0 ESRH680M08R 0.015 2.5 2.8 270 2.0 ESRH271M02R 0.012 3.0 4.1 220 2.5 ESRH221M0ER 0.012 3.0 4.1 180 4.0 ESRH181M04R 0.012 3.0 4.1 150 6.3 ESRH151M06R 0.012 3.0 4.1 100 8.0 ESRH101M08R 0.012 3.0 4.1 Markings Land Pattern

CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type ESRH Solid Polymer Aluminum SMT Capacitors Typical Impedance & ESR Life Test: Apply rated DC working voltage at 105 ºC (or 0.75 x WVDC at 125 ºC) for 1000 hours, and then stabilize them to +20 ºC. Capacitors will meet the following limits: ∆C = ±10% of the initial measured value DF & DCL ≤ the initial specified value Shelf Life Test: S helf life is typically 5 to 10 years. Accelerated test: after 500 hours at125 ºC, capacitors will meet the following limits after stabilization at 20 ºC: ∆C = ±10% of the initial measured value DF & DCL ≤ the initial specified value Moisture Resistance: After 500 hours storage at +60 ºC and 90% R.H. without load, the capacitor will meet the following limits: ∆C = +70%/–20% of the initial measured value (2.0 & 2.5 Vdc),+60%/–20% of the initial measured value (4.0 Vdc), +50%/–20% of the initial measured value (6.3 Vdc), +40%/–20% of the initial measured value (8.0 Vdc). DF ≤ two times the initial specified value DCL ≤ the initial specified value Resistance to Soldering Heat: Capacitors withstand being heated in an oven at 235 ºC for 200 seconds. Soldering: Solid Polymer Aluminum capacitors are designed for reflow soldering. Preheat the capacitors at 160 ºC for a maximum of 120 seconds. The time at or above 200 ºC on the surface of the capacitor should be per the following chart: Frequency (kHz) ESRH271M02R 270 µF/2V Impedance/ESR ESRH680M02R 680 µF/2V Impedance/ESR Specifications (continued) (For more information on this product see the Solid Polymer Aluminum Application Guide)