ESRD100M12R

ESRD101M02R CDE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type ESRD Solid Polymer Aluminum SMT Capacitors

Applications

Switching Supply Input/Output Filters Power Supply Decoupling High Frequency Noise Reduction Laptop LCD Displays A utomotive Digital Equipment Portable Electronic Equipment Markings

Ordering Information

4R7 = 4.7 µF 220 = 22 µF 101 = 100 µF Capacitance Tolerance M = ± 20% WVDC Code 02 = 2.0 Vdc 08 = 8.0 Vdc 0E = 2.5 Vdc 12 = 12.5 Vdc 04 = 4.0 Vdc 16 = 16.0 Vdc 06 = 6.3 Vdc Packaging Code R = Tape & Reel ESRD (1.8 mm Ht.): 3500 pcs/reel ESRD (2.8 mm Ht.): 2000 pcs/reel Polarity Stripe (Anode) W.V. Code D = 2.0 V K = 8.0 V E = 2.5 V B = 12.5 V G = 4.0 V C = 16.0 V J = 6.3 V Capacitance (“R” = Decimal Point) Lot Code Solid Polymer Aluminum capacitors combine the high capacitance capability of an electrolytic component with the high frequency performance of film capacitors. When the need for low impedance at high frequency is critical for your design, one ESRD chip is capable of replacing several liquid electrolyte aluminum or tantalum capacitors connected in parallel. This is due to the ultra-low ESR which results in significantly lower impedance than either aluminum or tantalum capacitors at frequencies of 100 kHz and above. There is no longer a need to stack capacitors to lower the impedance at high frequency. The low ESR and high capacitance make them ideal for bypassing high frequency noise, and for switching frequency filtering in DC/ DC conversion. ESRD capacitors are packaged in a molded resin case with the same footprint (7.3 x 4.3 mm) as the industry standard tantalum “D” and “E” case sizes. The solid electrolyte results in a capacitor with stable impedance and equivalent series resistance over the entire operating temperature range and they have more than twice the ripple current handling capability of tantalum capacitors. In addition, the solid electrolyte delivers a typical expected operating life of more than 50 years, and it is ignition free. Filtering power of 3 or more tantalum chips and 50 year life

Type ESRD Solid Polymer Aluminum SMT Capacitors CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com High Voltage Outline Drawing Ratings Dimensions in mm Maximum Maximum1 Case Catalog E.S.R Ripple Current Height Capacitance Part Number 100 kHz/20 °C 100 kHz/105 °C H (µF) (T ape & Reel) (Ω) (Amps) (mm)

2.0 Vdc

100 ESRD101M02R 0.018 2.5 1.8 ±0.1 120 ESRD121M02XR 0.015 2.7 1.8 ±0.1 180 ESRD181M02R 0.015 3.0 2.8 ±0.2 220 ESRD221M02R 0.015 3.0 2.8 ±0.2 270 ESRD271M02XR 0.012 3.3 2.8 ±0.2

2.5 Vdc

82 ESRD820M0ER 0.018 2.5 1.8 ±0.1 100 ESRD101M0EXR 0.015 2.7 1.8 ±0.1 150 ESRD151M0ER 0.015 3.0 2.8 ±0.2 180 ESRD181M0ER 0.015 3.0 2.8 ±0.2 220 ESRD221M0EXR 0.012 3.3 2.8 ±0.2

4.0 Vdc

56 ESRD560M04R 0.018 2.5 1.8 ±0.1 82 ESRD820M04XR 0.015 2.7 1.8 ±0.1 120 ESRD121M04R 0.015 3.0 2.8 ±0.2 150 ESRD151M04XR 0.012 3.3 2.8 ±0.2

6.3 Vdc

10 ESRD100M06R 0.055 1.4 1.8 ±0.1 22 ESRD220M06R 0.040 1.6 1.8 ±0.1 33 ESRD330M06R 0.028 2.0 1.8 ±0.1 47 ESRD470M06R 0.018 2.5 1.8 ±0.1 68 ESRD680M06XR 0.015 2.7 1.8 ±0.1 100 ESRD101M06R 0.015 3.0 2.8 ±0.2 120 ESRD121M06XR 0.012 3.3 2.8 ±0.2

8.0 Vdc

15 ESRD150M08R 0.040 1.6 1.8 ±0.1 22 ESRD220M08R 0.028 2.0 1.8 ±0.1 33 ESRD330M08R 0.018 2.5 1.8 ±0.1 68 ESRD680M08R 0.015 3.0 2.8 ±0.2

12.5 Vdc

10 ESRD100M12R 0.060 1.0 1.8 ±0.1 15 ESRD150M12R 0.050 1.3 1.8 ±0.1 22 ESRD220M12R 0.030 1.6 1.8 ±0.1

16.0 Vdc

6.8 ESRD6R8M16R 0.070 1.0 1.8 ±0.1 H = see ratings table

CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type ESRD Solid Polymer Aluminum SMT Capacitors Specifications Operating Temperature Range: –55 °C to +105 °C, at 100% rated voltage Surge Voltage: 125% of the rated working Vdc Capacitance Range: 2.2 µF to 270 µF Capacitance Tolerance: ±20% at 120 Hz and +20 °C DC Leakage Current (DCL): After a two minute application of the rated working voltage at +20 °C: 2V — 4V: I ≤0.06CV 6.3V — 16V: I ≤0.04CV or 3 µA (whichever greater) Dissipation Factor (DF): The ratio of the capacitorís equivalent series resistance to its reactance at 120Hz and +20 ºC ESRD (1.8 mm ht.): DF is 0.06 Max. ESRD (2.8 mm ht.): DF is 0.10 Max. Resistance to Soldering Heat: Heat the capacitors at 235 ºC in an oven for 200 seconds. The capacitors will meet the following limits after stabilizing at 20 ºC: ∆C = ±10% of the initial measured value DF ≤ the initial specified value DCL ≤ the initial specified value Moisture Resistance: Aft er 500 hours storage at +60 ºC and 90% to 95% RH without load, the capacitor will meet the following limits: ∆C = +70%/–20% of the initial measured value (2.0 Vdc, 2.5 Vdc), +60%/–20% of the initial measured value (4.0 Vdc), +50%/–20% of the initial measured value (6.3 Vdc), +40%/–20% of the initial measured value (all other voltages) DF ≤ two times the initial specified value DCL ≤ the initial specified value Life Test: Ap ply rated DC working voltage at 105 ºC for 1000 hours, and then stabilize them to +20 ºC. Capacitors will meet the following limits: ∆C = ±10% of the initial measured value DF ≤ the initial specified value DCL ≤ the initial specified value Shelf Life Test: Sh elf life is typically 5 to 10 years. Accelerated test: after 500 hours at 105 ºC, capacitors will meet the following limits after stabilization at 20 ºC: ∆C = ±10% of the initial measured value DF ≤ the initial specified value DCL ≤ the initial specified value Shear Test: No damage shall be visible after subjecting a mounted capacitor to a side force of 5 N for 10 seconds Vibration No abnormal change shall occur to capacitors that have been soldered (and attached) to a board when subjected to a vibration of 1.5 mm amplitude that is varied from 10 Hz to 2000 Hz in 20 min. cycles. The test duration is 2 hours for each right angle direction (total 6 hours). Capacitance is monitored during the last cycle of the test for stablilty. (For more information on this product please see the Solid Polymer Aluminum Capacitors Application Guide)