ESP32-C61 ESPRESSIF | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 73

Technical content

Datasheet sections

  • 1 ESP32-C61 Series Comparison
  • 1.1 Nomenclature
  • 1.2 Comparison
  • 2 Pins
  • 2.1 Pin Layout
  • 2.2 Pin Overview
  • 2.3 IO Pins
  • 2.3.1 IO MUX Functions
  • 2.3.2 LP IO MUX Functions
  • 2.3.3 Analog Functions
  • 2.3.4 Restrictions for GPIOs and LP GPIOs
  • 2.4 Analog Pins
  • 2.5 Power Supply
  • 2.5.1 Power Pins
  • 2.5.2 Power Scheme
  • 2.5.3 Chip Power-up and Reset
  • 2.6 Pin Mapping Between Chip and Flash/PSRAM
  • 3 Boot Configurations
  • 3.1 Chip Boot Mode Control
  • 3.2 SDIO Sampling and Driving Clock Edge Control
  • 3.3 ROM Messages Printing Control
  • 3.4 JTAG Signal Source Control
  • 4 Functional Description
  • 4.1 System
  • 4.1.1 Microprocessor and Master
  • 4.1.1.1 High-Performance CPU
  • 4.1.1.2 RISC-V Trace Encoder
  • 4.1.1.3 GDMA Controller
  • 4.1.2 Memory Organization
  • 4.1.2.1 Internal Memory
  • 4.1.2.2 External Memory
  • 4.1.3 System Components
  • 4.1.3.1 IO MUX and GPIO Matrix
  • 4.1.3.2 Reset
  • 4.1.3.3 Clock

Datasheet sections

  • 4.1.3.4 Interrupt Matrix
  • 4.1.3.5 Event T ask Matrix
  • 4.1.3.6 System Timer
  • 4.1.3.7 Power Management Unit
  • 4.1.3.8 Brownout Detector
  • 4.1.3.9 RTC Timer
  • 4.1.3.10 Timer Group
  • 4.1.3.11 Watchdog Timers
  • 4.1.3.12 Permission Control
  • 4.1.3.13 System Registers
  • 4.1.3.14 Debug Assistant
  • 4.1.4 Cryptography and Security Component
  • 4.1.4.1 ECC Accelerator
  • 4.1.4.2 Elliptic Curve Digital Signature Algorithm (ECDSA)
  • 4.1.4.3 SHA Accelerator
  • 4.1.4.4 External Memory Encryption and Decryption
  • 4.1.4.5 True Random Number Generator
  • 4.1.4.6 Power Glitch Detector
  • 4.2 Peripherals
  • 4.2.1 Connectivity Interface
  • 4.2.1.1 UART Controller
  • 4.2.1.2 SPI Controller
  • 4.2.1.3 I2C Controller
  • 4.2.1.4 I2S Controller
  • 4.2.1.5 USB Serial/JTAG Controller
  • 4.2.1.6 LED PWM Controller
  • 4.2.1.7 SDIO Slave Controller
  • 4.2.2 Analog Signal Processing
  • 4.2.2.1 SAR ADC
  • 4.2.2.2 Temperature Sensor
  • 4.2.2.3 Analog Voltage Comparator
  • 4.3 Wireless Communication
  • 4.3.1 Radio
  • 4.3.1.3 Clock Generator
  • 4.3.2 Wi-Fi
  • 4.3.2.1 Wi-Fi Radio and Baseband
  • 4.3.2.2 Wi-Fi MAC
  • 4.3.2.3 Networking Features
  • 4.3.3 Bluetooth LE
  • 4.3.3.1 Bluetooth LE PHY
  • 4.3.3.2 Bluetooth LE Link Controller
  • 5 Electrical Characteristics
  • 5.1 Absolute Maximum Ratings

Datasheet sections

  • 5.2 Recommended Operating Conditions
  • 5.3 VDD_SPI Output Characteristics
  • 5.4 ADC Characteristics
  • 5.5 Current Consumption Characteristics
  • 5.5.1 Current Consumption in Active Mode
  • 5.5.2 Current Consumption in Other Modes
  • 5.6 Memory Specifications
  • 5.7 Reliability
  • 6 RF Characteristics
  • 6.1.1 Wi-Fi RF Transmitter (TX) Characteristics
  • 6.1.2 Wi-Fi RF Receiver (RX) Characteristics
  • 6.2 Bluetooth 5 (LE) Radio
  • 6.2.1 Bluetooth LE RF Transmitter (TX) Characteristics
  • 6.2.2 Bluetooth LE RF Receiver (RX) Characteristics
  • 7 Packaging

Datasheet v1.0 32-bit RISC-V single-core microprocessor 2.4 GHz Wi-Fi 6 (IEEE 802.11ax) Bluetooth® 5 (LE)

3.3 V flash or PSRAM in the chip’s package

30 GPIOs

QFN40 (5×5 mm) or LGA40 (5×5 mm) Package Including: ESP32-C61HF4 ESP32-C61HR2 ESP32-C61HR8 ESP32-C61NF8R8LA www.espressif.com

ESP32-C61 is a low-power MCU-based system on a chip (SoC). ESP32-C61 integrates 2.4 GHz Wi-Fi 6 and Bluetooth® Low Energy (Bluetooth LE). ESP32-C61 consists of a 32-bit RISC-V single-core microprocessor, a Wi-Fi baseband, a Bluetooth LE baseband, RF module, and numerous peripherals. The functional block diagram of the SoC is shown below. CPU System Wireless MAC and Baseband Wi-Fi MAC Bluetooth LE Link Controller Bluetooth LE Baseband

2.4 GHz Balun + Switch

2.4 GHz Receiver

2.4 GHz T ransmitter

Espressif’s ESP32-C61 Wi-Fi + Bluetooth® Low Energy SoC SRAM PMU Power Management Secure Boot SHA ROM TRNG Modules having power in specific power modes: Active Active and Modem-sleep Active, Modem-sleep, Light-sleep; optional in Light-sleep⚙ All modes ⚙ optional in Deep-sleep ECC ⚙ APM Digital Signature - ECDSA Cache Temperature Sensor General-Purpose SPI ⚙ General-Purpose Timers Main System Watchdog Timers⚙ RTC Watchdog Timer eFuse Controller Super Watchdog LP IO GPIO UART I2C ADC System Timer GDMA LED PWM I2S USB Serial/JTAG Brown-out Detector ⚙ Analog Voltage Comparator ETM Power Glitch Detector Wi-Fi Baseband SDIO 2.0 Slave Flash/PSRAM Encryption (XTS-AES) ESP32-C61 Functional Block Diagram For more information on power consumption, see Section4.1.3.7Power Management Unit. Espressif Systems 2 ESP32-C61 Series Datasheet v1.0

Features

  • 1T1R in 2.4 GHz single band
  • Operating frequency: 2412~ 2484 MHz
  • IEEE 802.11ax-compliant – 20 MHz-only non-AP mode – Uplink and downlink OFDMA to enhance connectivity and performance in congested environments for IoT applications – Downlink MU-MIMO (multi-user, multiple input, multiple output) to increase network capacity – Beamformee that improves signal quality – Spatial reuse to maximize parallel transmissions – T arget wake time (TWT) that optimizes power saving mechanisms
  • Fully compatible with IEEE 802.11b/g/n protocol – 20 MHz and 40 MHz bandwidth – Data rate up to 150 Mbps – Wi-Fi Multimedia (WMM) – TX/RX A-MPDU, TX/RX A-MSDU – Immediate Block ACK – Fragmentation and defragmentation – Transmission opportunity (TXOP) – Automatic Beacon monitoring (hardware TSF) – Four virtual Wi-Fi interfaces – Simultaneous support for Infrastructure BSS in Station mode, SoftAP mode, Station + SoftAP mode, and promiscuous mode Note that when ESP32-C61 scans in Station mode, the SoftAP channel will change along with the Station channel – Antenna diversity – 802.11mc FTM Bluetooth®
  • Bluetooth LE: Bluetooth Core 6.0 certified
  • Bluetooth mesh 1.1
  • High power mode (20 dBm)
  • Direction finding (AoA/AoD) Espressif Systems 3 ESP32-C61 Series Datasheet v1.0
  • Periodic advertising with responses (PAwR)
  • LE connection subrating
  • LE power control
  • Speed: 125 Kbps, 500 Kbps, 1 Mbps, 2 Mbps
  • LE advertising extensions and multiple advertising sets
  • Allow devices to operate in Broadcaster, Observer, Central, and Peripheral roles concurrently CPU and Memory
  • 32-bit RISC-V single-core processor: – Clock speed: up to 160 MHz – CoreMark® score at 160 MHz: 553.78 CoreMark; 3.46 CoreMark/MHz (O3) – Five-stage pipeline
  • L1 cache (32 KB)
  • ROM: 256 KB
  • SRAM: 320 KB
  • Supported SPI protocols: SPI, Dual SPI, Quad SPI, and QPI interfaces that allow connection to flash, external RAM, and other SPI devices
  • Flash/external RAM controller with cache is supported
  • Flash in-Circuit Programming (ICP) is supported Advanced Peripheral Interfaces
  • 30 programmable GPIOs – Five strapping GPIOs
  • Digital interfaces: – Two SPI ports for communication with flash and PSRAM – General-purpose SPI port – Three UART – I2C – I2S – LED PWM controller, up to 6 channels – USB Serial/JTAG controller – SDIO 2.0 slave controller – General DMA controller, with 2 transmit channels and 2 receive channels – On-chip debug functionality via JTAG Espressif Systems 4 ESP32-C61 Series Datasheet v1.0

– Event task matrix (ETM)

  • Analog interfaces: – 12-bit SAR ADC, up to 4 channels – Temperature sensor – Brown-out detector – Analog voltage comparator
  • Timers: – Two 54-bit general-purpose timers – 52-bit system timer – Two main system watchdog timers – Three watchdog timers Power Management
  • Fine-resolution power control through a selection of clock frequency, duty cycle, Wi-Fi operating modes, and individual power control of internal components
  • Four power modes designed for typical scenarios: Active, Modem-sleep, Light-sleep, Deep-sleep
  • Power consumption in Deep-sleep mode is 10µA Security
  • Secure boot - permission control on accessing internal and external memory
  • Flash and PSRAM encryption - external memory encryption and decryption
  • 4096-bit OTP, up to 1792 bits for users
  • Cryptographic hardware acceleration: – Hash (FIPS PUB 180-4) – ECC (Curve P-192 and curve P-256 defined inFIPS 186-3 are supported) – Elliptic curve digital signature algorithm (ECDSA)
  • True random number generator (TRNG)
  • Power glitch detector RF Module
  • Antenna switches, RF balun, power amplifier, low-noise receive amplifier
  • Up to +19.5 dBm of power for an 802.11ax transmission
  • Up to +21 dBm of power for an 802.11b transmission
  • Up to⚶106 dBm receiver sensitivity for Bluetooth LE (125 Kbps) Espressif Systems 5 ESP32-C61 Series Datasheet v1.0

Applications

With low power consumption, ESP32-C61 is an ideal choice for IoT devices in the following areas:

  • Smart Home
  • Industrial Automation
  • Health Care
  • Consumer Electronics
  • Smart Agriculture
  • POS Machines
  • Service Robot
  • Audio Devices
  • Generic Low-power IoT Sensor Hubs
  • Generic Low-power IoT Data Loggers Espressif Systems 6 ESP32-C61 Series Datasheet v1.0

1-1 ESP32-C61 Series Comparison 13 2-1 ESP32-C61 Pin Overview 16 2-2 Peripheral Signals Routed via IO MUX 18 2-3 IO MUX Pin Functions 18 2-4 LP IO MUX Functions 20 2-5 Analog Signals Routed to Analog Functions 21 2-6 Analog Functions 21 2-7 Analog Pins 23 2-8 Power Pins 24 2-9 Voltage Regulators 24 2-10 Description of Timing Parameters for Power-up and Reset 25 2-11 Pin Mapping Between Chip and Off-Package Flash for ESP32-C611 26 2-12 Pin Mapping Between Chip and Off-Package PSRAM1 27 3-1 Default Configuration of Strapping Pins 28 3-2 Description of Timing Parameters for the Strapping Pins 29 3-3 Chip Boot Mode Control 29 3-4 SDIO Input Sampling Edge/Output Driving Edge Control 30 3-5 UART0 ROM Message Printing Control 30 3-6 USB Serial/JTAG ROM Message Printing Control 31 3-7 JTAG Signal Source Control 31 5-2 Recommended Operating Conditions 56 5-3 VDD_SPI Internal and Output Characteristics 57 5-4 ADC Characteristics 57 5-5 ADC Calibration Results 57 5-6 Current Consumption for Wi-Fi (2.4 GHz) in Active Mode 58 5-7 Current Consumption for Bluetooth LE in Active Mode 58 5-8 Current Consumption in Modem-sleep Mode 58 5-9 Current Consumption in Low-Power Modes 59 5-10 Flash Specifications 59 5-11 PSRAM Specifications 59 5-12 Reliability Qualifications 60 6-1 Wi-Fi RF Characteristics 61 6-2 TX Power with Spectral Mask and EVM Meeting 802.11 Standards 61 6-3 TX EVM Test1 61 6-4 RX Sensitivity 62 6-5 Maximum RX Level 63 6-6 RX Adjacent Channel Rejection 63 6-7 Bluetooth LE RF Characteristics 64 6-8 Bluetooth LE - Transmitter Characteristics - 1 Mbps 64 6-9 Bluetooth LE - Transmitter Characteristics - 2 Mbps 64 6-10 Bluetooth LE - Transmitter Characteristics - 125 Kbps 65 6-11 Bluetooth LE - Transmitter Characteristics - 500 Kbps 65 Espressif Systems 10 ESP32-C61 Series Datasheet v1.0

6-12 Bluetooth LE - Receiver Characteristics - 1 Mbps 65 6-13 Bluetooth LE - Receiver Characteristics - 2 Mbps 66 6-14 Bluetooth LE - Receiver Characteristics - 125 Kbps 67 6-15 Bluetooth LE - Receiver Characteristics - 500 Kbps 67 7-1 Pin Overview 71 Espressif Systems 11 ESP32-C61 Series Datasheet v1.0

1-1 ESP32-C61 Series Nomenclature 13 2-1 ESP32-C61HR2 & ESP32-C61HR8 & ESP32-C61HF4 Pin Layout (Top View) 14 2-2 ESP32-C61NF8R8LA Pin Layout (Top View) 15 2-3 ESP32-C61 Power Scheme 25 2-4 Visualization of Timing Parameters for Power-up and Reset 25 3-1 Visualization of Timing Parameters for the Strapping Pins 29 4-1 Address Mapping Structure 34 4-2 Components and Power Domains 39 4-3 Components and Power Domains T able 39 7-1 QFN40 (5×5 mm) Package 68 7-2 LGA40 (5×5 mm) Package 69 Espressif Systems 12 ESP32-C61 Series Datasheet v1.0

1 ESP32-C61 Series Comparison

1.1 Nomenclature

x: In-package flash or PSRAM size F/R Ambient temperature H: High temperature N: Normal temperature F: In-package flash R: In-package PSRAM x L A Package Type (optional) L：LGA Package Package Version Code (optional) Figure 1-1. ESP32-C61 Series Nomenclature

1.2 Comparison

Table 1-1. ESP32-C61 Series Comparison Part Number In-Package Flash In-Package PSRAM Ambient Temp.1 Off-Package Flash Off-Package PSRAM ESP32-C61HF4 4 MB (Quad SPI)2 — ⚶40 ∼ 105 °C — — ESP32-C61HR2 — 2 MB (Quad SPI)⚶40 ∼ 105 °C Supported — ESP32-C61HR8 — 8 MB (Quad SPI)⚶40 ∼ 105 °C Supported — ESP32-C61NF8R8LA3 8 MB (Quad SPI) 8 MB (Quad SPI)⚶40 ∼ 85 °C — — 1 Ambient temperature specifies the recommended temperature range of the environment immediately outside an Espressif chip. 2 For details about SPI modes, see Section2.6 Pin Mapping Between Chip and Flash/PSRAM. 3 This variant uses an LGA package and is not yet in mass production. Espressif Systems 13 ESP32-C61 Series Datasheet v1.0

2 Pins

2.1 Pin Layout

XTAL_32K_N VDDA2 GPIO2 MTDI MTMS SPICS0/NC SPICLK/NC SPID/NC USB_D- USB_D+ GPIO24

41 GND

SDIO_CLK SDIO_CM D M TDO M TCK SPIQ/NC SPIWP/NC VDD_SPI/NC VDDPST2 XTAL_N VDDA1 GPIO7 GPIO29 U0TXD U0RXD GPIO9 GPIO8 15 19181716 20 ANT_2G CHIP_PU VDDA4 VDDA3 VDDPST1 XTAL_32K_P SPIHD/NC SDIO_DATA3 SDIO_DATA2 SDIO_DATA1 SDIO_DATA0 SPICS1 XTAL_P Figure 2-1. ESP32-C61HR2 & ESP32-C61HR8 & ESP32-C61HF4 Pin Layout (Top View) Notice: For ESP32-C61HF4, SPICS0, SPIQ, SPIWP, VDD_SPI, SPIHD, SPICLK, and SPID pins are not connected (NC). Espressif Systems 14 ESP32-C61 Series Datasheet v1.0

XTAL_32K_N VDDA2 GPIO2 MTDI MTMS NC NC NC USB_D- USB_D+ GPIO24 SDIO_CLK SDIO_CM D M TDO M TCK NC NC NC VDDPST2 XTAL_N VDDA1 GPIO7 GPIO29 U0TXD U0RXD GPIO9 GPIO8 15 19181716 20 ANT_2G CHIP_PU VDDA4 VDDA3 VDDPST1 XTAL_32K_P NC SDIO_DATA3 SDIO_DATA2 SDIO_DATA1 SDIO_DATA0 NC XTAL_P Figure 2-2. ESP32-C61NF8R8LA Pin Layout (Top View) Espressif Systems 15 ESP32-C61 Series Datasheet v1.0

2.2 Pin Overview

The ESP32-C61 chip integrates multiple peripherals that require communication with the outside world. To keep the chip package size reasonably small, the number of available pins has to be limited. So the only way to route all the incoming and outgoing signals is through pin multiplexing. Pin muxing is controlled via software programmable registers. All in all, the ESP32-C61 chip has the following types of pins:

  • IO pinswith the following predefined sets of functions to choose from: – Each IO pin has predefinedIO MUX functions– see T able2-3 IO MUX Functions – Some IO pins have predefinedLP IO MUX functions– see T able2-4 LP IO MUX Functions – Some IO pins have predefinedanalog functions– see T able2-6 Analog Functions Predefined functionsmeans that each IO pin has a set of direct connections to certain signals from on-chip peripherals. During run-time, the user can configure which peripheral signal from a predefined set to connect to a certain pin at a certain time via memory mapped registers.
  • Analog pinsthat have exclusively-dedicatedanalog functions– see T able2-7 Analog Pins
  • Power pinsthat supply power to the chip components and non-power pins – see T able2-8 Power Pins T able2-1 Pin Overviewgives an overview of all the pins. For more information, see the respective sections for each pin type below, orAppendix A – ESP32-C61 Consolidated Pin Overview. Table 2-1. ESP32-C61 Pin Overview Pin Pin Pin Pin Providing Pin Settings3 Pin Function Sets1 No. Name Type Power 2 At Reset After Reset IO MUX LP IO MUX Analog

6 XTAL_32K_P I/O/T VDDPST1 – – IO MUX LP IO MUX Analog

7 XTAL_32K_N I/O/T VDDPST1 – – IO MUX LP IO MUX Analog

8 GPIO2 I/O/T VDDPST1 – – IO MUX LP IO MUX –

9 MTMS I/O/T VDDPST1 IE IE IO MUX LP IO MUX Analog

10 MTDI I/O/T VDDPST1 IE IE IO MUX LP IO MUX Analog

11 MTCK I/O/T VDDPST1 – IE IO MUX LP IO MUX Analog

12 MTDO I/O/T VDDPST1 – IE IO MUX LP IO MUX –

13 SDIO_CMD I/O/T VDDPST2 – IE IO MUX – –

14 SDIO_CLK I/O/T VDDPST2 – IE IO MUX – –

15 SDIO_DATA0 I/O/T VDDPST2 – IE IO MUX – –

16 SDIO_DATA1 I/O/T VDDPST2 – IE IO MUX – –

17 SDIO_DATA2 I/O/T VDDPST2 – IE IO MUX – –

18 SDIO_DATA3 I/O/T VDDPST2 – IE IO MUX – –

19 SPICS1 5 I/O/T VDD_SPI/VDDPST2 – – IO MUX – –

20 SPICS0 4,5 I/O/T VDD_SPI/VDDPST2 – – IO MUX – –

Cont’d on next page Espressif Systems 16 ESP32-C61 Series Datasheet v1.0

Table 2-1 – cont’d from previous page Pin Pin Pin Pin Providing Pin Settings3 Pin Function Sets1 No. Name Type Power 2 At Reset After Reset IO MUX LP IO MUX Analog

22 SPIQ 4,5 I/O/T VDD_SPI/VDDPST2 – – IO MUX – –

23 SPIWP 4,5 I/O/T VDD_SPI/VDDPST2 – – IO MUX – –

24 VDD_SPI 5 Power VDDPST2 – – IO MUX – Analog

25 SPIHD 4,5 I/O/T VDD_SPI/VDDPST2 – – IO MUX – –

26 SPICLK 4,5 O VDD_SPI/VDDPST2 – – IO MUX – –

27 SPID 4,5 I/O/T VDD_SPI/VDDPST2 – – IO MUX – –

28 USB_D- I/O/T VDDPST2 – IE IO MUX – Analog

29 USB_D+ I/O/T VDDPST2 – IE,WPU IO MUX – Analog

30 GPIO24 I/O/T VDDPST2 – – IO MUX – –

31 GPIO8 I/O/T VDDPST2 IE IE IO MUX – Analog

32 GPIO9 I/O/T VDDPST2 IE,WPU IE,WPU IO MUX – Analog

33 U0RXD I/O/T VDDPST2 – IE,WPU IO MUX – –

34 U0TXD I/O/T VDDPST2 – IE,WPU IO MUX – –

35 GPIO29 I/O/T VDDPST2 – – IO MUX – –

36 GPIO7 I/O/T VDDPST2 IE IE IO MUX – –

  1. Bold marks the pin function set in which a pin has its default function in the default boot mode. See Section3.1 Chip Boot Mode Control. 2. Except for GPIO12 and GPIO13 whose default drive strength is 40 mA, the default drive strength for all the other pins is 20 mA. 3. Column Pin Settingsshows predefined settings at reset and after reset with the following abbreviations:
  • IE – input enabled
  • WPU – internal weak pull-up resistor enabled
  • WPD – internal weak pull-down resistor enabled
  • USB_PU – USB pull-up resistor enabled – By default, the USB function is enabled for USB pins (i.e., GPIO12 and GPIO13), and the pin pull-up is decided by the USB pull-up resistor. This resistor is controlled by USB_SERIAL_JTAG_DP/DM_PULLUP and the pull-up value is managed by USB_SERIAL_JTAG_PULLUP_VALUE. – When the USB function is disabled, USB pins are used as regular GPIOs and the pin’s internal weak pull-up and pull-down resistors are disabled by default (configurable by IO_MUX_FUN_WPU/WPD). 4. For ESP32-C61HF4, the SPICS0, SPIQ, SPIWP, VDD_SPI, SPIHD, SPICLK, and SPID pins are not connected (NC). 5. For ESP32-C61NF8R8LA, the SPICS1, SPICS0, SPIQ, SPIWP, VDD_SPI, SPIHD, SPICLK, and SPID pins are not connected (NC). Espressif Systems 17 ESP32-C61 Series Datasheet v1.0

2.3 IO Pins

2.3.1 IO MUX Functions

The IO MUX allows multiple input/output signals to be connected to a single input/output pin. Each IO pin of ESP32-C61 can be connected to one of the three signals (IO MUX functions, i.e., F0⚶F2), as listed in T able2-3 IO MUX Functions. Among the three sets of signals:

  • Some are routed via the GPIO Matrix (GPIO0, GPIO1, etc.), which incorporates internal signal routing circuitry for mapping signals programmatically. It gives the pin access to almost any peripheral signals. However, the flexibility of programmatic mapping comes at a cost as it might affect the latency of routed signals.
  • Some are directly routed from certain peripherals (U0TXD, MTCK, etc.), including UART0, JTAG, SPI0/1, SPI2 and SDIO 2.0 Slave - see T able2-2 IO MUX Functions. Table 2-2. Peripheral Signals Routed via IO MUX Pin Function Signal Description U0TXD Transmit data UART0 interfaceU0RXD Receive data MTCK Test clock JTAG interface for debuggingMTDO Test data out MTDI Test data in MTMS Test mode select SPIQ Data out

3.3 V SPI0/1 interface for connection to in-package or

off-package-flash/PSRAM via the SPI bus. It supports 1-, 2-, 4-line SPI modes. See also Section2.6 Pin Mapping Between Chip and Flash/PSRAM SPID Data in SPIHD Hold SPIWP Write protect SPICLK Clock SPICS… Chip select FSPIQ Data out SPI2 interface for fast SPI connection. It supports 1-, 2-, 4-line SPI modes FSPID Data in FSPIHD Hold FSPIWP Write protect FSPICLK Clock FSPICS0 Chip select SDIO_CLK Clock The Secure Digital Input Output (SDIO) interface for connecting to an external SDIO hostSDIO_CMD Command SDIO_DATA… Data T able2-3 IO MUX Functionsshows the IO MUX functions of IO pins. Table 2-3. IO MUX Pin Functions Pin IO MUX / IO MUX Function1, 2 No. GPIO Name2 F0 Type F1 Type F2 Type

6 XTAL_32K_P GPIO0 I/O/T GPIO0 I/O/T

Cont’d on next page Espressif Systems 18 ESP32-C61 Series Datasheet v1.0

Table 2-3 – cont’d from previous page Pin IO MUX / IO MUX Function1, 2 No. GPIO Name2 F0 Type F1 Type F2 Type

7 XTAL_32K_N GPIO1 I/O/T GPIO1 I/O/T

8 GPIO2 GPIO2 I/O/T GPIO2 I/O/T FSPIQ I1/O/T

9 MTMS MTMS I1 GPIO3 I/O/T FSPIHD I1/O/T

10 MTDI MTDI I1 GPIO4 I/O/T FSPIWP I1/O/T

11 MTCK MTCK I1 GPIO5 I/O/T

12 MTDO MTDO O/T GPIO6 I/O/T FSPICLK I1/O/T

13 SDIO_CMD SDIO_CMD I1/O/T GPIO25 I/O/T

14 SDIO_CLK SDIO_CLK I1 GPIO26 I/O/T

15 SDIO_DATA0 SDIO_DATA0 I1/O/T GPIO27 I/O/T

16 SDIO_DATA1 SDIO_DATA1 I1/O/T GPIO28 I/O/T

17 SDIO_DATA2 SDIO_DATA2 I1/O/T GPIO22 I/O/T

18 SDIO_DATA3 SDIO_DATA3 I1/O/T GPIO23 I/O/T

19 SPICS1/NC SPICS1 O/T GPIO14 I/O/T

20 SPICS0/NC SPICS0 O/T GPIO15 I/O/T

22 SPIQ/NC SPIQ I1/O/T GPIO16 I/O/T

23 SPIWP/NC SPIWP I1/O/T GPIO17 I/O/T

24 VDD_SPI/NC GPIO18 I/O/T GPIO18 I/O/T

25 SPIHD/NC SPIHD I1/O/T GPIO19 I/O/T

26 SPICLK/NC SPICLK O/T GPIO20 I/O/T

27 SPID/NC SPID I1/O/T GPIO21 I/O/T

28 USB_D- GPIO12 I/O/T GPIO12 I/O/T

29 USB_D+ GPIO13 I/O/T GPIO13 I/O/T

30 GPIO24 GPIO24 I/O/T GPIO24 I/O/T

31 GPIO8 GPIO8 I/O/T GPIO8 I/O/T FSPICS0 I1/O/T

32 GPIO9 GPIO9 I/O/T GPIO9 I/O/T

33 U0RXD U0RXD I1 GPIO10 I/O/T

34 U0TXD U0TXD O GPIO11 I/O/T

35 GPIO29 GPIO29 I/O/T GPIO29 I/O/T

36 GPIO7 GPIO7 I/O/T GPIO7 I/O/T FSPID I1/O/T

1 Bold marks the default pin functions in the default boot mode. See Section3.1 Chip Boot Mode Control. 2 Regarding highlighted cells, see Section2.3.4 Restrictions for GPIOs and LP GPIOs. 3 Each IO MUX function (Fn, n = 0 ~ 2) is associated with atype. The description oftype is as follows:

  • I – input. O – output. T – high impedance.
  • I1 – input; if the pin is assigned a function other than Fn, the input signal of Fn is always 1.
  • I0 – input; if the pin is assigned a function other than Fn, the input signal of Fn is always 0. Espressif Systems 19 ESP32-C61 Series Datasheet v1.0

2.3.2 LP IO MUX Functions

The LP IO MUX function is activated when the HP digital system is shut down, thereby saving power. Table 2-4. LP IO MUX Functions Pin LP IO LP IO MUX Function No. Name F0

6 LP_GPIO0 LP_GPIO0

7 LP_GPIO1 LP_GPIO1

8 LP_GPIO2 LP_GPIO2

9 LP_GPIO3 LP_GPIO3

10 LP_GPIO4 LP_GPIO4

11 LP_GPIO5 LP_GPIO5

12 LP_GPIO6 LP_GPIO6

Espressif Systems 20 ESP32-C61 Series Datasheet v1.0

2.3.3 Analog Functions

Some IO pins also haveanalog functions, for analog peripherals (such as ADC) in any power mode. Internal analog signals are routed to these analog functions, see T able2-5 Analog Functions. Table 2-5. Analog Signals Routed to Analog Functions Pin Function Signal Description ADC1_CHn ADC1 channeln signal ADC1 channeln interface XTAL_32K_N Negative clock signal The differential clock input of the chip, connecting to the 32 kHz differential clock output of the external crystalXTAL_32K_P Positive clock signal USB_D- USB data differential signalUSB Serial/JTAG functionUSB_D+ ZCDn Voltage from GPIO Pad Analog Pad voltage comparator interface T able2-6 Analog Functionsshows the analog functions of IO pins. Table 2-6. Analog Functions Pin Analog Analog Function3 No. IO Name1, 2 F0 F1

6 XTAL_32K_P XTAL_32K_P –

7 XTAL_32K_N XTAL_32K_N ADC1_CH0

9 MTMS – ADC1_CH1

10 MTDI – ADC1_CH2

11 MTCK – ADC1_CH3

28 USB_D- USB_D- 1 –

29 USB_D+ USB_D+ –

24 VDD_SPI VDD_SPI –

31 GPIO8 2 ZCD0 –

32 GPIO9 ZCD1 –

1 Bold marks the default pin functions in the default boot

mode. See Section3.1 Chip Boot Mode Control. 2 Regarding highlighted cells, see Section2.3.4 Re- strictions for GPIOs and LP GPIOs. Espressif Systems 21 ESP32-C61 Series Datasheet v1.0

2.3.4 Restrictions for GPIOs and LP GPIOs

All IO pins of ESP32-C61 have GPIO and some have RTC_GPIO pin functions. However, the IO pins are multiplexed and can be configured for different purposes based on the requirements. Some IOs have restrictions for usage. It is essential to consider the multiplexed nature and the limitations when using these IO pins. In tables of this chapter, some pin functions arehighlighted . The non-highlighted GPIO or RTC_GPIO pins are recommended for use first. If more pins are needed, the highlighted GPIOs or RTC_GPIOs should be chosen carefully to avoid conflicts with important pin functions. The highlighted IO pins have the following important pin functions:

  • GPIO – allocated for communication with in-package flash/PSRAM and NOT recommended for other uses. For details, see Section2.6 Pin Mapping Between Chip and Flash/PSRAM.
  • GPIO – have one of the following important functions: – Strapping pins– need to be at certain logic levels at startup. See Section3 Boot Configurations. – USB_D+/- – by default, connected to the USB Serial/JTAG Controller. To function as GPIOs, these pins need to be reconfigured. – JTAG interface– often used for debugging. See T able2-2 IO MUX Functions. To free these pins up, the pin functions USB_D+/- of the USB Serial/JTAG Controller can be used instead. See also Section 3.4 JTAG Signal Source Control. – UART interface– often used for debugging. See T able2-2 IO MUX Functions. See alsoAppendix A – ESP32-C61 Consolidated Pin Overview. Espressif Systems 22 ESP32-C61 Series Datasheet v1.0

2.4 Analog Pins

Table 2-7. Analog Pins Pin Pin Pin Pin No. Name Type Function

1 ANT_2G I/O RF input/output

4 CHIP_PU —

High: on, enables the chip (powered up). Low: off, disables the chip (powered down). Note: Do not leave the CHIP_PU pin floating. 38 XTAL_N — External clock input/output connected to chip’s crystal. P/N means differential clock positive/negative.39 XTAL_P — Espressif Systems 23 ESP32-C61 Series Datasheet v1.0

2.5 Power Supply

2.5.1 Power Pins

The chip is powered via the power pins described in T able2-8 Power Pins. Table 2-8. Power Pins Pin Pin Power Supply1,2 No. Name Direction Power Domain / Other IO Pins3

2 VDDA3 Input Analog power domain

3 VDDA4 Input Analog power domain

5 VDDPST1 Input HP digital and part of LP digital power domains LP IO

24 VDD_SPI Output A power supply from VDDPST2 used to power the flash

21 VDDPST2 Input HP digital power domain HP IO

37 VDDA1 Input Analog power domain

40 VDDA2 Input Analog power domain

41 GND — External ground connection

1 See in conjunction with Section2.5.2 Power Scheme. 2 For recommended and maximum voltage and current, see Section5.1 Absolute Maximum Ratingsand Section 5.2 Recommended Operating Conditions.

3 LP IO pins are those powered by VDDPST1 and so on, as shown in Figure2-3 ESP32-C61 Power

Scheme. See also T able2-1 Pin Overview> ColumnPin Providing Power.

2.5.2 Power Scheme

The power scheme is shown in Figure2-3 ESP32-C61 Power Scheme. The components on the chip are powered via voltage regulators. Table 2-9. Voltage Regulators Voltage Regulator Output Power Supply HP 1.1 V HP power domain LP 1.1 V LP power domain Espressif Systems 24 ESP32-C61 Series Datasheet v1.0

VDDPST1 VDDPST2 VDDA1 VDDA2 Analog VDD_SPI LP IO HP IO RSPI C61/C31 VDDA3 VDDA4 Figure 2-3. ESP32-C61 Power Scheme

2.5.3 Chip Power-up and Reset

Once the power is supplied to the chip, its power rails need a short time to stabilize. After that, CHIP_PU – the pin used for power-up and reset – is pulled high to activate the chip. For information on CHIP_PU as well as power-up and reset timing, see Figure2-4 and T able2-10. VIL_nRST tSTBL tRST

2.8 VVDDA3,

VDDA4, VDDPST1, VDDPST2, VDDA1, VDDA2 CHIP_PU Figure 2-4. Visualization of Timing Parameters for Power-up and Reset Table 2-10. Description of Timing Parameters for Power-up and Reset Parameter Description Min (µs) tSTBL Time reserved for the power rails of VDDA3, VDDA4, VDDPST1, VDDPST2, VDDA1 and VDDA2 to stabilize before the CHIP_PU pin is pulled high to activate the chip tRST Time reserved for CHIP_PU to stay below VIL_nRST to reset the chip 50 Espressif Systems 25 ESP32-C61 Series Datasheet v1.0

2.6 Pin Mapping Between Chip and Flash/PSRAM

T able2-11 lists the pin mapping between the chip and flash/PSRAM for all SPI modes. For chip variants with in-package flash/PSRAM (see T able1-1 Comparison), the pins allocated for communication with in-package flash/PSRAM can be identified depending on the SPI mode used. The recommended pins for connecting to off-package flash/PSRAM can be found in table below. For variants with in-package flash/PSRAM, the in-package flash or PSRAM must be powered by VDD_SPI, and the corresponding pin cannot be used as a digital function pin. For off-package flash or PSRAM, the power supply is optional. It can be provided either by VDD_SPI or by an external power source supplied by the user. In general, if VDD_SPI is used to power flash or PSRAM, then the pin cannot be used as a digital function pin. For more information on SPI controllers, see also Section4.2.1.2SPI Controller. Notice: It is not recommended to use the pins connected to flash/PSRAM for any other purposes. Table 2-11. Pin Mapping Between Chip and Off-Package Flash for ESP32-C611 Pin No. Pin Name Single SPI Dual SPI Quad SPI Flash Flash Flash

26 SPICLK CLK CLK CLK

20 SPICS0 2 CS# CS# CS#

27 SPID MOSI SIO0 3 SIO0

22 SPIQ MISO SIO1 SIO1

23 SPIWP WP# SIO2

25 SPIHD HOLD# SIO3

1 An off-package flash can only be connected if the chip

variant does not have in-package flash.

2 SPICS0 is used to access flash

3 SIO: Serial Data Input and Output

Espressif Systems 26 ESP32-C61 Series Datasheet v1.0

Table 2-12. Pin Mapping Between Chip and Off-Package PSRAM1 QFN48 Pin Name Single SPI Quad SPI Pin No. PSRAM PSRAM

26 SPICLK CLK CLK

19 SPICS1 2 CE# CE#

27 SPID SI 3 SIO0

22 SPIQ SO 4 SIO1

23 SPIWP SIO2

25 SPIHD SIO3

1 An off-package PSRAM can only be con-

nected if the chip variant does not have in- package PSRAM. If PSRAM is not connected, these pins cannot be used as GPIO pins.

2 SPICS1 is used to access PSRAM

3 SI: Serial Data Input, equivalent to MOSI

4 SO: Serial Data Output, equivalent to MISO

Espressif Systems 27 ESP32-C61 Series Datasheet v1.0

3 Boot Configurations

The chip allows for configuring the following boot parameters through strapping-pins and eFuse parameter at power-up or a hardware reset, without microcontroller interaction.

  • Chip boot mode – Strapping pin: GPIO8 and GPIO9
  • SDIO sampling and driving clock edge – Strapping pin: MTDI and MTMS
  • ROM message printing – Strapping pin: GPIO8 – eFuse parameter: EFUSE_UART_PRINT_CONTROL and EFUSE_DIS_USB_SERIAL_JTAG_ROM_PRINT
  • JTAG signal source – Strapping pin: GPIO7 – eFuse parameter: EFUSE_DIS_PAD_JTAG, EFUSE_DIS_USB_JTAG, and EFUSE_JTAG_SEL_ENABLE The default values of all the above eFuse parameters are 0, which means that they are not burnt. Given that eFuse is one-time programmable, once programmed to 1, it can never be reverted to 0. The default values of the strapping pins, namely the logic levels, are determined by pins’ internal weak pull-up/pull-down resistors at reset if the pins are not connected to any circuit, or connected to an external high-impedance circuit. Table 3-1. Default Configuration of Strapping Pins Strapping Pin Default Configuration Bit Value MTMS Floating – MTDI Floating – GPIO7 Floating – GPIO8 Floating – GPIO9 Pull-up 1 To change the bit values, the strapping pins should be connected to external pull-down/pull-up resistances. If the ESP32-C61 is used as a device by a host MCU, the strapping pin voltage levels can also be controlled by the host MCU. All strapping pins have latches. At system reset, the latches sample the bit values of their respective strapping pins and store them until the chip is powered down or shut down. The states of latches cannot be changed in any other way. It makes the strapping pin values available during the entire chip operation, and the pins are freed up to be used as regular IO pins after reset. The timing of signals connected to the strapping pins should adhere to thesetup timeand hold time specifications in T able3-2 and Figure3-1. Espressif Systems 28 ESP32-C61 Series Datasheet v1.0

Table 3-2. Description of Timing Parameters for the Strapping Pins Parameter Description Min (ms) tSU Setup timeis the time reserved for the power rails to stabilize be- fore the CHIP_PU pin is pulled high to activate the chip. 0 tH Hold timeis the time reserved for the chip to read the strapping pin values after CHIP_PU is already high and before these pins start operating as regular IO pins. Strapping pin VIH_nRST VIH tSU tH CHIP_PU Figure 3-1. Visualization of Timing Parameters for the Strapping Pins

3.1 Chip Boot Mode Control

GPIO8 and GPIO9 control the boot mode after the reset is released. See T able3-3 Chip Boot Mode Control. Table 3-3. Chip Boot Mode Control Boot Mode GPIO8 GPIO9 SPI Boot1 Any value 1 Joint Download Boot2 1 0

1 Bold marks the default value and configura-

tion.

2 Joint Download Boot mode supports the

following download methods:

  • USB-Serial-JTAG Download Boot
  • UART Download Boot
  • SDIO Slave 2.0 Download Boot In SPI Boot mode, the ROM bootloader loads and executes the program from SPI flash to boot the system. In Joint Download Boot mode, users can download binary files into flash using UART0, USB or SDIO Slave interfaces and execute it in SPI Boot mode. Espressif Systems 29 ESP32-C61 Series Datasheet v1.0

In Joint Download Boot mode, it is also possible to download binary files into SRAM using UART0, USB or SDIO Slave interfaces and execute it from SRAM.

3.2 SDIO Sampling and Driving Clock Edge Control

The strapping pin MTMS and MTDI can be used to decide on which clock edge to sample signals and drive output lines. See T able3-4 SDIO Input Sampling Edge/Output Driving Edge Control. Table 3-4. SDIO Input Sampling Edge/Output Driving Edge Control Edge behavior MTMS MTDI Falling edge sampling, falling edge output 0 0 Falling edge sampling, rising edge output 0 1 Rising edge sampling, falling edge output 1 0 Rising edge sampling, rising edge output 1 1

1 MTMS and MTDI are floating by default, so above are not

default configurations.

3.3 ROM Messages Printing Control

During the boot process, the messages by the ROM code can be printed to:

  • (Default) UART0 and USB Serial/JTAG controller
  • USB Serial/JTAG controller
  • UART0 LP_AON_STORE4_REG[0], EFUSE_UART_PRINT_CONTROL and GPIO8 control ROM messages printing to UART0 as shown in T able3-5 UART0 ROM Message Printing Control. Table 3-5. UART0 ROM Message Printing Control UART0 ROM Code PrintingEFUSE_UART_PRINT_CONTROL GPIO8 Register1 Always enabled2 0 Ignored Enabled 1 0 Disabled 1 Disabled 2 0 Enabled 1 Always disabled 3 Ignored Disabled Ignored Ignored 1

1 Register: LP_AON_STORE4_REG[0]

2 Bold marks the default value and configuration. EFUSE_DIS_USB_SERIAL_JTAG_ROM_PRINT and LP_AON_STORE4_REG[0] control the printing toUSB Serial/JTAG controlleras shown in T able3-6 USB Serial/JTAG ROM Message Printing Control. Espressif Systems 30 ESP32-C61 Series Datasheet v1.0

Table 3-6. USB Serial/JTAG ROM Message Printing Control USB Serial/JTAG ROM Message Printing Control LP_AON_STORE4_REG[0] EFUSE_DIS_USB_SERIAL_JTAG _ROM_PRINT Enabled 0 0 Disabled 0 1

1 Ignored

1 Bold marks the default value and configuration.

3.4 JTAG Signal Source Control

The strapping pin GPIO7 can be used to control the source of JTAG signals during the early boot process. This pin does not have any internal pull resistors and the strapping value must be controlled by the external circuit that cannot be in a high impedance state. As T able3-7 shows, GPIO7 is used in combination with EFUSE_DIS_PAD_JTAG, EFUSE_DIS_USB_JTAG, and EFUSE_JTAG_SEL_ENABLE. Table 3-7. JTAG Signal Source Control eFuse eFuse eFuse

33 GPIO7 JTAG Signal Source

USB Serial/JTAG Controller5 1 1 JTAG pins MTDI, MTCK, MTMS and MTDO0 x x x 0 1 x x 1 0 x x USB Serial/JTAG Controller 1 1 x x JTAG is disabled1 x x x 1 eFuse 1: EFUSE_DIS_PAD_JTAG 2 eFuse 2: EFUSE_DIS_USB_JTAG 3 eFuse 3: EFUSE_JTAG_SEL_ENABLE 4 x: x indicates that the value has no effect on the result and can be ignored. 5 Bold marks the default value and configuration. Espressif Systems 31 ESP32-C61 Series Datasheet v1.0

4 Functional Description

4.1 System

This section describes the core of the chip’s operation, covering its microprocessor, memory organization, system components, and security features.

4.1.1 Microprocessor and Master

This subsection describes the core processing units within the chip and their capabilities.

4.1.1.1 High-Performance CPU

The ESP-RISC-V CPU (HP CPU) is a high-performance 32-bit core based on the RISC-V instruction set architecture (ISA) comprising base integer (I), multiplication/division (M), atomic (A) and compressed (C) standard extensions. Feature List

  • Five-stage pipeline that supports an operating clock frequency up to 160 MHz
  • RV32IMAC ISA (instruction set architecture)
  • Zc extensions (Zcb, Zcmp, and Zcmt)
  • Two-cycle pipelined multiplier and radix-4 SRT divider
  • Compatible with RISC-V ISA Manual Volume I: Unprivileged ISA Version 2.2 and RISC-V ISA Manual, Volume II: Privileged Architecture, Version 1.10
  • Zero wait cycle access to on-chip SRAM and cache for program and data access over IRAM/DRAM interface
  • Branch predictor BHT , BTB, and RAS
  • Compliant with RISC-V Core Local Interrupt (CLINT)
  • Compliant with RISC-V Core-Local Interrupt Controller (CLIC)
  • Two privilege modes: Machine (M) mode and User (U) mode
  • Debug module (DM) compliant with the specification RISC-V External Debug Support Version 0.13 with external debugger support over an industry-standard JTAG/USB port
  • Offline trace debug compliant with RISC-V Trace Specification v2.0, see Section4.1.1.2RISC-V Trace Encoder
  • Hardware trigger compliant with the specification RISC-V External Debug Support Version 0.13 with up to three breakpoints/watchpoints
  • Physical memory protection (PMP) and attributes (PMA) for up to 16 configurable regions Espressif Systems 32 ESP32-C61 Series Datasheet v1.0

4.1.1.2 RISC-V Trace Encoder

The RISC-V Trace Encoder in the ESP32-C61 chip provides a way to capture detailed trace information from the High-Performance CPU’s execution, enabling deeper analysis and optimization of the system. It connects to the HP CPU’s instruction trace interface and compresses the information into smaller packets, which are then stored in internal SRAM. Feature List

  • Compatible with Efficient Trace for RISC-V Version 2.0
  • Synchronization packets sent every few clock cycles or packets
  • Zero bytes as anchor tags to identify boundaries between data packets
  • Configurable memory writing mode: loop mode or non-loop mode
  • Trace lost status to indicate packet loss
  • Automatic restart after packet loss
  • Support for delta address mode and full address mode
  • Support for filter unit

4.1.1.3 GDMA Controller

The GDMA Controller is a General Direct Memory Access (GDMA) controller that allows peripheral-to-memory, memory-to-peripheral, and memory-to-memory data transfer without the CPU’s intervention. The GDMA has four independent channels, two transmit channels and two receive channels. These channels are shared by peripherals with the GDMA feature, such as SPI2, I2S, SHA, and ADC. Feature List

  • Programmable length of data to be transferred in bytes
  • Linked list of descriptors for efficient data transfer management
  • INCR burst transfer when accessing internal RAM for improved performance
  • Access to internal RAM and off-package PSRAM
  • Software-configurable selection of peripheral requesting service
  • Fixed-priority and round-robin channel arbitration schemes for managing bandwidth
  • Support for Event T ask Matrix

4.1.2 Memory Organization

This subsection describes the memory arrangement to explain how data is stored, accessed, and managed for efficient operation. Figure 4-1 illustrates the address mapping structure of ESP32-C61. Espressif Systems 33 ESP32-C61 Series Datasheet v1.0

0x3000_0000 0x3FFF_FFFF 0x4000_0000 0x4003_FFFF 0x4004_0000 0x407F_FFFF 0x4080_0000 0x4084_FFFF 0x4085_0000 0x41FF_FFFF 0x4200_0000 0x43FF_FFFF 0x4400_0000 0x5FFF_FFFF 0x6000_0000 0x600B_FFFF 0x600C_0000 0x600C_FFFF Cache (32 KB) MMU External Memory ROM (256 KB) HP Memory (320 KB) GDMA 0x600D_0000 0xFFFF_FFFF Peripherals Not available for use 0x0000_0000 0x1FFF_FFFF 0x2000_0000 0x2FFF_FFFF CPU Sub-system Figure 4-1. Address Mapping Structure

4.1.2.1 Internal Memory

The internal memory of ESP32-C61 refers to the memory integrated on the chip die or in the chip package, including ROM, SRAM, eFuse, flash, and PSRAM. Feature List

  • 256 KB of ROM for booting and core functions
  • 320 KB of SRAM for data and instructions
  • 4096-bit eFuse memory, with 1792 bits available for users
  • In-package flash – See flash size in Chapter1 ESP32-C61 Series Comparison – More than 100,000 program/erase cycles Espressif Systems 34 ESP32-C61 Series Datasheet v1.0

– More than 20 years of data retention time – Clock frequency up to 120 MHz

  • In-package PSRAM – See PSRAM size in Chapter1 ESP32-C61 Series Comparison – Clock frequency up to 120 MHz

4.1.2.2 External Memory

Some variants of ESP32-C61 allow connection to flash/PSRAM via the SPI, Dual SPI, Quad SPI, and QPI interfaces. For more information, please refer to T able1-1. CPU’s instruction memory space and read-only data memory space can map into the flash/PSRAM of ESP32-C61, and the size of the flash/PSRAM can be 32 MB at most respectively. ESP32-C61 supports hardware encryption/decryption based on XTS-AES to protect developers’ programs and data in the flash/PSRAM. Feature List Through the cache, ESP32-C61 can support at a time up to:

  • 32 MB of instruction memory space which can map into the flash/PSRAM as individual blocks of 64/32/16 KB. 32-bit fetch is supported
  • 32 MB of data memory space which can map into the flash/PSRAM as individual blocks of 64/32/16 KB. 8-bit, 16-bit, and 32-bit reads are supported by the flash. 8-bit, 16-bit, and 32-bit reads and writes are supported by the PSRAM Note: After ESP32-C61 is initialized, software can customize the mapping of flash/PSRAM into the CPU address space. 4.1.2.3 eFuse Controller The eFuse memory is a one-time programmable memory that stores parameters and user data, and the eFuse controller of ESP32-C61 is used to program and read this eFuse memory. Feature List
  • Configure write protection for some blocks
  • Configure read protection for some blocks
  • Various hardware encoding schemes against data corruption

4.1.3 System Components

This subsection describes the essential components that contribute to the overall functionality and control of the system. Espressif Systems 35 ESP32-C61 Series Datasheet v1.0

4.1.3.1 IO MUX and GPIO Matrix

The IO MUX and GPIO Matrix in the ESP32-C61 chip provide flexible routing of peripheral input and output signals to the GPIO pins. These peripherals enhance the functionality and performance of the chip by allowing the configuration of I/O, support for multiplexing, and signal synchronization for peripheral inputs. Feature List

  • 30 GPIO pins for general-purpose I/O or connection to internal peripheral signals
  • GPIO matrix: – Routing 37 peripheral input and 57 output signals to any GPIO pin – Signal synchronization for peripheral inputs based on IO MUX operating clock – GPIO Filter hardware for input signal filtering
  • IO MUX for directly connecting certain digital signals (SPI, JTAG, UART , SDIO) to pins
  • Support for Event T ask Matrix

4.1.3.2 Reset

The ESP32-C61 chip provides four types of reset that occur at different levels, namely CPU Reset, Core Reset, System Reset, and Chip Reset. Except for Chip Reset, all reset types preserve the data stored in internal memory. Feature List

  • Four types of reset: – CPU Reset – Resets the CPU core – Core Reset – Resets the whole digital system except for the LP system – System Reset – Resets the whole digital system, including the LP system – Chip Reset – Resets the whole chip
  • Reset trigger: – Directly by hardware – Via software by configuring the corresponding registers of the CPU
  • Support for retrieving reset cause

4.1.3.3 Clock

The ESP32-C61 chip has clocks sourced from oscillators, RC circuits, and PLL circuits, which are then processed by dividers or selectors. The clocks can be classified into high-speed clocks for devices working at higher frequencies and slow-speed clocks for low-power systems and some peripherals. Espressif Systems 36 ESP32-C61 Series Datasheet v1.0

  • High-speed clocks for HP system – 40 MHz external crystal clock Note: * ESP32-C61 cannot operate without the external crystal clock. * ESP32-C61 can automatically filter out high-frequency glitches in the external main crystal clock. – 480 MHz internal PLL clock
  • Slow-speed clocks for LP system and some peripherals working in low-power mode – 32 kHz external crystal clock (must be an external differential clock input, generally provided by a passive crystal) – Internal fast RC oscillator with adjustable frequency (20 MHz by default) – Internal slow RC oscillator with adjustable frequency (150 kHz by default) – External slow clock input through XTAL_32K_P (32 kHz by default, can be provided by an active oscillator or other sources) Note: – The 32 kHz external crystal clock and the external slow clock input through XTAL_32K_P cannot coexist; only one can be used at a time.

4.1.3.4 Interrupt Matrix

The Interrupt Matrix in the ESP32-C61 chip routes interrupt requests generated by various peripherals to CPU interrupts. Feature List

  • 53 peripheral interrupt sources accepted as input
  • 32 CPU peripheral interrupts generated to CPU as output
  • Current interrupt status query of peripheral interrupt sources
  • Multiple interrupt sources mapping to a single CPU interrupt (i.e., shared interrupts)

4.1.3.5 Event Task Matrix

ESP32-C61 integrates an SoC ETM with multiple channels. Each input event on channels is mapped to an output task. Events are generated by peripherals, while tasks are received by peripherals. Feature List

  • Up to 50 mapping channels, each connected to an event and a task and controlled independently Espressif Systems 37 ESP32-C61 Series Datasheet v1.0
  • An event or a task can be mapped to any tasks or events in the matrix. That is to say, one event can be mapped to different tasks via multiple channels, or different events can be mapped to the same task via their individual channels
  • Peripherals supporting ETM include GPIO, LED PWM, general-purpose timers, RTC Timer, system timer, temperature sensor, ADC, I2S, GDMA, and PMU

4.1.3.6 System Timer

The System Timer (SYSTIMER) in the ESP32-C61 chip is a 52-bit timer that can be used to generate tick interrupts for the operating system or as a general timer to generate periodic or one-time interrupts. Feature List

  • Two 52-bit counters and three 52-bit comparators
  • 52-bit alarm values and 26-bit alarm periods
  • Two modes to generate alarms: target mode and period mode
  • Three comparators generating three independent interrupts based on configured alarm value or alarm period
  • Ability to load back sleep time recorded by RTC timer via software after Deep-sleep or Light-sleep
  • Counters can be stalled if the CPU is stalled or in OCD mode
  • Real-time alarm events

4.1.3.7 Power Management Unit

The ESP32-C61 has an advanced Power Management Unit (PMU). It can be flexibly configured to power up different power domains of the chip to achieve the best balance between chip performance, power consumption, and wakeup latency. Configuring the PMU is a complex procedure. To simplify power management for typical scenarios, there are the followingpredefined power modesthat power up different combinations of power domains:

  • Active mode– The CPU, RF circuits, and all peripherals are on. The chip can process data, receive, transmit, and listen.
  • Modem-sleep mode– The CPU is on, but the clock frequency can be reduced. The wireless connections can be configured to remain active as RF circuits are periodically switched on when required.
  • Light-sleep mode– The CPU stops running, and can be optionally powered on. The chip can be woken up via all wake up mechanisms: MAC, host, RTC timer, or external interrupts. Wireless connections can remain active. Some groups of digital peripherals can be optionally powered off.
  • Deep-sleep mode– Only LP system is powered on Figure 4-2 Components and Power Domainsand the following Figure4-3 Components and Power Domains T ableshow the distribution of chip components betweenpower domains and power subdomains. Espressif Systems 38 ESP32-C61 Series Datasheet v1.0

Espressif’s ESP/three.case/two.case-C/six.case/one.case Wi-Fi + Bluetooth® Low Energy SoC ROM

2.4 GHz

T ransmi/t.ss03ter RF Synthesizer RF Circuits PLL XTAL_CLKRC_FAST _CLK Analog Power Domain LP IO PMU LP Power Domain eFuse Controller Power distribution Power domain Power subdomain Super Watchdog CPU RISC-V /three.case/two.case-bit Microprocessor JTAG Cache Power Glitch Detector TRNG I/two.caseC I/two.caseS System Timer Temperature Sensor Main System Watchdog Timers ECDSA UART ETM GPIO ADC USB Serial/ JTAG XTS-AES SHA APM ECC Secure Boot Analog Voltage Comparator General- purpose SPI General- purpose Timers LED PWM

2.4 GHz Balun

+ Switch External Main Clock Fast RC Osciillator Phase- Locked Loop GDMAWireless Power Circuits Modem Power Memory SRAM MMU Interrupt Matrix Brown-out Detector RTC Watchdog Timer Figure 4-2. Components and Power Domains LP Power Domain HP Power Domain Analog Power Domain Always-on LP Peri Memory Wireless Pwr Circuits CPU Wireless Digital Curcuits Others RC_FAST _CLK XTAL_CLK PLL RF Circuits Active ON ON ON ON ON ON ON ON ON ON ON Modem_sleep ON ON ON ON ON ON ON ON ON OFF OFF Light-sleep ON ON ON ON OFF OFF OFF OFF OFF OFF OFF Deep-sleep ON OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF Power Domain Power mode Figure 4-3. Components and Power Domains Table Espressif Systems 39 ESP32-C61 Series Datasheet v1.0

4.1.3.8 Brownout Detector

ESP32-C61 can periodically monitor the voltage of the power supply, and in the event of abnormal voltage, it is capable of generating interrupts or initiating resets. Feature List

  • Configurable detection threshold
  • Configurable reset level
  • Glitch filtering

4.1.3.9 RTC Timer

ESP32-C61 RTC Timer starts counting once the chip is powered on and keeps counting in any state. Feature List

  • 46-bit counter operating under the RTC clock
  • Real-time reading of the time-base counter’s value
  • Configurable target value for the counter to trigger an interrupt upon timeout

4.1.3.10 Timer Group

The Timer Group (TIMG) in the ESP32-C61 chip can be used to precisely time an interval, trigger an interrupt after a particular interval (periodically and aperiodically), or act as a hardware clock. ESP32-C61 has two timer groups, each consisting of one general-purpose timer and one Main System Watchdog Timer. Feature List

  • 16-bit prescaler
  • 54-bit auto-reload-capable up-down counter
  • Able to read real-time value of the time-base counter
  • Halt, resume, and disable the time-base counter
  • Programmable alarm generation
  • Timer value reload (auto-reload at an alarm or a software-controlled instant reload)
  • RTC slow clock frequency calculation
  • Level interrupt generation
  • Real-time alarm events
  • Support for several ETM tasks and events Espressif Systems 40 ESP32-C61 Series Datasheet v1.0

4.1.3.11 Watchdog Timers

The Watchdog Timers (WDT) in ESP32-C61 are used to detect and recover from malfunctions. The chip contains three digital watchdog timers: one in each of the two timer groups (MWDT) and one in the RTC Module (RWDT). Additionally, there is one analog watchdog timer called the Super watchdog (SWD) that helps prevent the system from operating in a sub-optimal state. Feature List

  • Digital watchdog timers: – Four stages, each with a separately programmable timeout value and timeout action – Timeout actions: Interrupt, CPU reset, core reset, system reset (RWDT only) – Flash boot protection under SPI Boot mode at stage 0 – Write protection that makes WDT register read only unless unlocked – 32-bit timeout counter
  • Analog watchdog timer: – Timeout period slightly less than one second – Timeout actions: Interrupt, system reset

4.1.3.12 Permission Control

The Permission Control module in ESP32-C61 is responsible for managing access permissions to memory and peripheral registers. It consists of two parts: PMP (Physical Memory Protection) and APM (Access Permission Management). Feature List

  • Access permission management for ROM, HP memory, HP peripheral, and LP peripheral address spaces
  • APM supports each master (such as DMA) to select one of the four security modes
  • Access permission configuration for up to 16 address ranges
  • Interrupt function and exception information record

4.1.3.13 System Registers

The System Registers in the ESP32-C61 chip are used to configure various auxiliary chip features. Feature List

  • Control External memory encryption and decryption
  • Control CPU core debugging
  • Control Bus timeout protection Espressif Systems 41 ESP32-C61 Series Datasheet v1.0

4.1.3.14 Debug Assistant

The Debug Assistant provides a set of functions to help locate bugs and issues during software debugging. It offers various monitoring capabilities and logging features to assist in identifying and resolving software errors efficiently. Feature List

  • Read/write monitoring: Monitor whether the CPU bus reads from or writes to a specified memory address space
  • Stack pointer (SP) monitoring: Prevent stack overflow or erroneous push/pop operations violation will trigger an interrupt.
  • Program counter (PC) logging: Record PC value. The developer can get the last PC value at the most recent CPU reset
  • Bus access logging: Record information about bus access when the CPU or DMA writes a specified value

4.1.4 Cryptography and Security Component

This subsection describes the security features incorporated into the chip, which safeguard data and operations.

4.1.4.1 ECC Accelerator

The ECC Accelerator accelerates calculations based on the Elliptic Curve Cryptography (ECC) algorithm and ECC-derived algorithms like ECDSA, which offers the advantages of smaller public keys compared to RSA cryptography with equivalent security. Feature List

  • Supports two different elliptic curves (P-192 and P-256)
  • 11 working modes that supports Base Point Verification, Base Point Multiplication, Jacobian Point Verification, and Jacobian Point Multiplication
  • Secure operating mode for Base Point Multiplication in a fixed amount of time

4.1.4.2 Elliptic Curve Digital Signature Algorithm (ECDSA)

In cryptography, the Elliptic Curve Digital Signature Algorithm (ECDSA) offers a variant of the Digital Signature Algorithm (DSA) which uses elliptic-curve cryptography. ESP32-C61’s ECDSA accelerator provides a secure and efficient environment for computing ECDSA signatures. It offers fast computations while ensuring the confidentiality of the signing process to prevent information leakage. This makes it a valuable tool for applications that require high-speed cryptographic operations with strong security guarantees. By using the ECDSA accelerator, users can be confident that their data is being protected without sacrificing performance. Espressif Systems 42 ESP32-C61 Series Datasheet v1.0

  • Digital signature generation and verification
  • Two elliptic curves, namely P-192 and P-256 defined inFIPS 186-3
  • Two hash algorithms for message hash in the ECDSA operation, namely SHA-224 and SHA-256 defined in FIPS PUB 180-4
  • High security features: – Dynamic access permission in different operation statuses to ensure information security, preventing key leakage due to intermediate data leakage – Fixed-duration signing and verification processes to resist side-channel attacks

4.1.4.3 SHA Accelerator

ESP32-C61 integrates an SHA accelerator, which is a hardware device that speeds up the SHA algorithm significantly, compared to SHA algorithms implemented solely in software. The SHA accelerator has two working modes, Typical SHA and DMA-SHA. Feature List

  • Support for multiple SHA algorithms: SHA-1, SHA-224, and SHA-256
  • Two working modes: Typical SHA based on CPU and DMA-SHA based on DMA
  • Interleaved function in Typical SHA working mode
  • Interrupt function in DMA-SHA working mode

4.1.4.4 External Memory Encryption and Decryption

The ESP32-C61 integrates an External Memory Encryption and Decryption module that complies with the XTS-AES standard algorithm specified inIEEE Std 1619-2007, providing security for users’ application code and data stored in the external memory (flash and PSRAM). Users can store proprietary firmware and sensitive data (e.g., credentials for gaining access to a private network) to the external flash, and securely run data-sensitive applications in PSRAM. Feature List

  • General XTS-AES algorithm, compliant withIEEE Std 1619-2007
  • Software-based manual encryption
  • High-speed auto decryption without software
  • Encryption and decryption functions jointly enabled/disabled by registers configuration, eFuse parameters, and boot mode
  • configurable counter measures against DPA attacks
  • Flash and PSRAM use their own separate keys Espressif Systems 43 ESP32-C61 Series Datasheet v1.0

4.1.4.5 True Random Number Generator

The ESP32-C61 contains a true random number generator, which generates 32-bit random numbers that can be used for cryptographical operations, among other things. The true random number generator in ESP32-C61 generates true random numbers, which means random numbers generated from a physical process, rather than by means of an algorithm. No number generated within the specified range is more or less likely to appear than any other number. Feature List

  • RNG entropy source – Thermal noise from high-speed ADC or SAR ADC – An asynchronous clock mismatch

4.1.4.6 Power Glitch Detector

ESP32-C61 can monitor the voltage of the power supply in real time. When a voltage glitch occurs, the chip will reset immediately to prevent power glitch attacks. Feature List

  • Configurable threshold for power glitch (around 2.7 V by default)
  • Enabled upon power-up Espressif Systems 44 ESP32-C61 Series Datasheet v1.0

4.2 Peripherals

This section describes the chip’s peripheral capabilities, covering connectivity interfaces and on-chip sensors that extend its functionality.

4.2.1 Connectivity Interface

This subsection describes the connectivity interfaces on the chip that enable communication and interaction with external devices and networks.

4.2.1.1 UART Controller

The UART Controller in the ESP32-C61 chip facilitates the transmission and reception of asynchronous serial data between the chip and external UART devices. It supports three UART interfaces. Feature List

  • Programmable baud rates up to 5 MBaud
  • RAM shared by TX FIFOs and RX FIFOs
  • Support for various lengths of data bits and stop bits
  • Parity bit support
  • Special character AT_CMD detection
  • RS485 protocol support
  • IrDA protocol support
  • High-speed data communication using GDMA
  • Receive timeout feature
  • UART as the wake-up source
  • Software and hardware flow control Pin Assignment The pins connected to transmit and receive signals (U0TXD and U0RXD) forUART0 are multiplexed with GPIO10 ~ GPIO11 via IO MUX. Other signals can be routed to any GPIOs via the GPIO matrix.

4.2.1.2 SPI Controller

ESP32-C61 has the following SPI interfaces:

  • SPI0 used by ESP32-C61’s cache and GDMA to access in-package or off-package flash/PSRAM
  • SPI1 used by the CPU to access in-package or off-package flash/PSRAM
  • SPI2 is a general-purpose SPI controller with access to general-purpose DMA channels SPI0 and SPI1 are reserved for system use, and only SPI2 is available for users. Espressif Systems 45 ESP32-C61 Series Datasheet v1.0
  • Supports Single SPI, Dual SPI, Quad SPI, QPI modes
  • Data transmission is in bytes Features of SPI2
  • Supports operation as a master or slave
  • Support for DMA
  • Supports Single SPI, Dual SPI, Quad SPI, QPI modes
  • Configurable clock polarity (CPOL) and phase (CPHA)
  • Configurable clock frequency
  • Data transmission is in bytes
  • Configurable read and write data bit order: most-significant bit (MSB) first, or least-significant bit (LSB) first
  • As a master – Supports 2-line full-duplex communication with clock frequency up to 80 MHz – Supports 1-, 2-, 4-line half-duplex communication with clock frequency up to 80 MHz – Provides six FSPICS… pins for connection with six independent SPI slaves – Configurable CS setup time and hold time
  • As a slave – Supports 2-line full-duplex communication with clock frequency up to 60 MHz – Supports 1-, 2-, 4-line half-duplex communication with clock frequency up to 60 MHz Pin Assignment For SPI0/1, the pins are multiplexed with GPIO14 ~ GPIO17 and GPIO19 ~ GPIO20 via the IO MUX. For SPI2, the pins for data and clock signals are multiplexed with GPIO2, GPIO7 , and JTAG interface via the IO MUX. The pins for chip select signals for multiplexed with GPIO8 via the IO MUX. For more information about the pin assignment, see Section2.3 IO Pins.

4.2.1.3 I2C Controller

The I2C Controller supports communication between the master and slave devices using the I2C bus. Feature List

  • Communication with multiple external devices
  • Master and slave modes for I2C
  • Standard mode (100 Kbit/s) and fast mode (400 Kbit/s) Espressif Systems 46 ESP32-C61 Series Datasheet v1.0
  • SCL clock stretching in slave mode
  • Programmable digital noise filtering
  • Support for 7-bit and 10-bit addressing, as well as dual address mode Pin Assignment For regular I2C, the pins used can be chosen from any GPIOs via the GPIO Matrix. For more information about the pin assignment, see Section2.3 IO Pins.

4.2.1.4 I2S Controller

The I2S Controller in the ESP32-C61 chip provides a flexible communication interface for streaming digital data in multimedia applications, particularly digital audio applications. Feature List

  • Master mode and slave mode
  • Full-duplex and half-duplex communications
  • Separate TX and RX units that can work independently or simultaneously
  • A variety of audio standards supported: – TDM Philips standard – TDM MSB alignment standard – TDM PCM standard – PDM standard
  • PCM-to-PDM TX interface
  • Configurable high-precision BCK clock, with frequency up to 40 MHz – Sampling frequencies can be 8 kHz, 16 kHz, 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 128 kHz, 192 kHz, etc.
  • 8-/16-/24-/32-bit data communication
  • Direct Memory Access (DMA)
  • A-law andµ-law compression/decompression algorithms for improved signal-to-quantization noise ratio
  • Flexible data format control Pin Assignment The pins for the I2S Controller can be chosen from any GPIOs via the GPIO Matrix. For more information about the pin assignment, see Section2.3 IO Pins. Espressif Systems 47 ESP32-C61 Series Datasheet v1.0

4.2.1.5 USB Serial/JTAG Controller

The USB Serial/JTAG controller in the ESP32-C61 chip provides an integrated solution for communicating to the chip over a standard USB CDC-ACM serial port as well as a convenient method for JTAG debugging. It eliminates the need for external chips or JTAG adapters, saving space and reducing cost. Feature List

  • USB 2.0 full speed compliant, capable of up to 12 Mbit/s transfer speed (Note that this controller does not support the faster 480 Mbit/s high-speed transfer mode)
  • CDC-ACM virtual serial port and JTAG adapter functionality
  • CDC-ACM: – CDC-ACM adherent serial port emulation (plug-and-play on most modern OSes) – Host controllable chip reset and entry into download mode
  • JTAG adapter functionality: – Fast communication with CPU debugging core using a compact representation of JTAG instructions
  • Support for reprogramming of attached flash memory through the ROM startup code
  • Internal PHY Pin Assignment The pins for the USB Serial/JTAG Controller are multiplexed with GPIO12 ~ GPIO13 via IO MUX. For more information about the pin assignment, see Section2.3 IO Pins.

4.2.1.6 LED PWM Controller

The LED PWM controller can generate independent digital waveform on six channels. The LED PWM controller supports: Feature List

  • Generating digital waveform with configurable periods and duty cycle. The resolution of duty cycle can be up to 20 bits
  • Multiple clock sources, including 80 MHz PLL clock, external main crystal clock, and internal fast RC oscillator
  • Operation when the CPU is in Light-sleep mode
  • Gradual increase or decrease of duty cycle, which is useful for the LED RGB color-gradient generator
  • Up to 16 duty cycle ranges for gamma curve generation, each can be independently configured in terms of duty cycle direction (increase or decrease), step size, the number of steps, and step frequency Pin Assignment The pins for the LED PWM Controller can be chosen from any GPIOs via the GPIO Matrix. Espressif Systems 48 ESP32-C61 Series Datasheet v1.0

For more information about the pin assignment, see Section2.3 IO Pins.

4.2.1.7 SDIO Slave Controller

The SDIO Slave controller in ESP32-C61 provides hardware support for the Secure Digital Input/Output (SDIO) device interface. It allows an SDIO host to access ESP32-C61 via an SDIO bus protocol. Feature List

  • compatible with SDIO Physical Layer Specification V2.00 and SDIO Specifications V2.00
  • support SPI, 1-bit SDIO, and 4-bit SDIO transfer modes
  • clock range of 0 ~ 50 MHz
  • configurable sample and drive clock edge
  • integrated and SDIO-accessible registers for information interaction
  • support SDIO interrupts
  • automatic padding data and discarding the padded data on the SDIO bus
  • block size up to 512 bytes
  • interrupt vector between the host and slave for bidirectional interrupt
  • support DMA for data transfer
  • support wake-up from sleep when connection is retained Pin Assignment The pins for the SDIO Slave controller are multiplexed with GPIO22 ~ GPIO23, and GPIO25 ~ GPIO28 via IO MUX. For more information about the pin assignment, see Section2.3 IO Pins.

4.2.2 Analog Signal Processing

This subsection describes components on the chip that sense and process real-world data.

4.2.2.1 SAR ADC

ESP32-C61 integrates a Successive Approximation Analog-to-Digital Converter (SAR ADC) to convert analog signals into digital representations. Feature List

  • 12-bit sampling resolution
  • Analog voltage sampling from up to four pins
  • Attenuation of input signals for voltage conversion
  • Software-triggered one-time sampling
  • Timer-triggered multi-channel scanning Espressif Systems 49 ESP32-C61 Series Datasheet v1.0
  • DMA continuous conversion for seamless data transfer
  • Two filters with configurable filter coefficient
  • Threshold monitoring which helps to trigger an interrupt
  • Support for Event T ask Matrix Pin Assignment The SAR ADC pins are multiplexed with GPIO1 and GPIO3 ~ GPIO5. These GPIOs are also multiplexed with LP_GPIO1, LP_GPIO3 ~ LP_GPIO5, and with the JTAG interface. For more information about the pin assignment, see Section2.3 IO Pins.

4.2.2.2 Temperature Sensor

The Temperature Sensor in the ESP32-C61 chip allows for real-time monitoring of temperature changes inside the chip. Feature List

  • Measurement range:⚶40°C ~ 125°C
  • Software triggering, wherein the data can be read continuously once triggered
  • Hardware automatic triggering and temperature monitoring
  • Configurable temperature offset based on the environment to improve the accuracy
  • Adjustable measurement range
  • Two automatic monitoring wake-up modes: absolute value mode and incremental value mode
  • Support for Event T ask Matrix

4.2.2.3 Analog Voltage Comparator

ESP32-C61 provides a group of analog voltage comparators which contain two special pads. This peripheral can be used to compare the voltages of the two pads or compare the voltage of one pad with an internally adjustable stable voltage. Feature List

  • Internal or external reference voltage
  • Supported internal reference voltage ranging from 0 to 0.7 × VDD_PST
  • Support for ETM
  • Interrupt triggered when the measured voltage reaches the reference voltage Pin Assignment The analog voltage comparator has dedicated pads, GPIO8 and GPIO9. GPIO9 is the test pad, and GPIO8 serves as the reference pad when using an external reference voltage. Espressif Systems 50 ESP32-C61 Series Datasheet v1.0

For more information about the pin assignment, see Section2.3 IO Pins. Espressif Systems 51 ESP32-C61 Series Datasheet v1.0

4.3 Wireless Communication

This section describes the chip’s wireless communication capabilities, spanning radio technology, Wi-Fi, and Bluetooth.

4.3.1 Radio

This subsection describes the fundamental radio technology embedded in the chip that facilitates wireless communication and data exchange. 4.3.1.1 2.4 GHz Receiver The 2.4 GHz receiver demodulates the 2.4 GHz RF signal to quadrature baseband signals and converts them to the digital domain with two high-resolution, high-speed ADCs. To adapt to varying signal channel conditions, ESP32-C61 integrates RF filters, Automatic Gain Control (AGC), DC offset cancelation circuits, and baseband filters. 4.3.1.2 2.4 GHz Transmitter The 2.4 GHz transmitter modulates the quadrature baseband signals to the 2.4 GHz RF signal, and drives the antenna with a high-powered CMOS power amplifier. The use of digital calibration further improves the linearity of the power amplifier. Additional calibrations are integrated to cancel any radio imperfections, such as:

  • Carrier leakage
  • I/Q amplitude/phase matching
  • Baseband nonlinearities
  • RF nonlinearities
  • Antenna matching These built-in calibration routines reduce the cost, time, and specialized equipment required for product testing.

4.3.1.3 Clock Generator

The clock generator produces quadrature clock signals of 2.4 GHz for both the receiver and the transmitter. All components of the clock generator are integrated into the chip, including inductors, varactors, filters, regulators and dividers. The clock generator has built-in calibration and self-test circuits. Quadrature clock phases and phase noise are optimized on chip with patented calibration algorithms which ensure the best performance of the receiver and the transmitter.

4.3.2 Wi-Fi

This subsection describes the chip’s Wi-Fi capabilities, which facilitate wireless communication at a high data rate. Espressif Systems 52 ESP32-C61 Series Datasheet v1.0

4.3.2.1 Wi-Fi Radio and Baseband

The ESP32-C61 Wi-Fi radio and baseband support the following features:

  • 1T1R in 2.4 GHz band
  • 802.11ax – 20 MHz-only non-AP mode – MCS0 ~MCS9 – Uplink and downlink OFDMA – Downlink MU-MIMO (multi-user, multiple input, multiple output) – Longer OFDM symbol, with 0.8, 1.6, 3.2µs guard interval – DCM (dual carrier modulation), up to 16-QAM – Single-user/multi-user beamformee – Channel quality indication (CQI) – RX STBC (single spatial stream)
  • 802.11b/g/n – MCS0 ~MCS7 that supports 20 MHz and 40 MHz bandwidth – MCS32 – Data rate up to 150 Mbps – 0.4 µs guard interval
  • Adjustable transmitting power
  • Antenna diversity ESP32-C61 supports antenna diversity with an external RF switch. This switch is controlled by one or more GPIOs, and used to select the best antenna to minimize the effects of channel imperfections.

4.3.2.2 Wi-Fi MAC

ESP32-C61 implements the full IEEE 802.11 b/g/n/ax Wi-Fi MAC protocol. ESP32-C61 supports the Basic Service Set (BSS) STA and SoftAP operations under the Enhanced Distributed Channel Access (EDCA). Power management is handled automatically with minimal host interaction to minimize the active duty period. The ESP32-C61 Wi-Fi MAC applies the following low-level protocol functions automatically:

  • Four virtual Wi-Fi interfaces
  • Infrastructure BSS in Station mode, SoftAP mode, Station + SoftAP mode, and promiscuous mode
  • RTS protection, CTS-to-Self protection, Immediate Block ACK
  • Fragmentation and defragmentation
  • TX/RX A-MPDU, TX/RX A-MSDU
  • Transmit opportunity (TXOP) Espressif Systems 53 ESP32-C61 Series Datasheet v1.0
  • Wi-Fi multimedia (WMM)
  • GCMP, CCMP, TKIP, WAPI, WEP, BIP, WPA2-PSK, and WPA3-PSK
  • Automatic beacon monitoring (hardware TSF)
  • 802.11mc FTM
  • 802.11ax supports: – T arget wake time (TWT) requester – Multiple BSSIDs – Triggered response scheduling – Multi-user Request-to-Send (MU-RTS), Multi-user Block ACK Request (MU-BAR), and Multi-STA Block ACK (M-BA) frame – Intra-PPDU power saving mechanism – Two network allocation vectors (NAV) – BSS coloring – Spatial reuse – Uplink power headroom – Operating mode control – Buffer status report – TXOP duration RTS threshold – UL-OFDMA random access (UORA)

4.3.2.3 Networking Features

Espressif provides libraries for TCP/IP networking, ESP-WIFI-MESH networking, and other networking

4.3.3 Bluetooth LE

This subsection describes the chip’s Bluetooth capabilities, which facilitate wireless communication for low-power, short-range applications.

4.3.3.1 Bluetooth LE PHY

Bluetooth Low Energy PHY in ESP32-C61 supports:

  • 1 Mbps PHY
  • 2 Mbps PHY for higher data rates
  • coded PHY for longer range (125 Kbps and 500 Kbps)
  • HW listen before talk (LBT) Espressif Systems 54 ESP32-C61 Series Datasheet v1.0

4.3.3.2 Bluetooth LE Link Controller

Bluetooth Low Energy Link Controller and Host in ESP32-C61 support:

  • direction finding (AoA/AoD)
  • periodic advertising with responses (PAwR)
  • LE connection subrating (LE enhanced connection update)
  • LE advertising extensions and multiple advertising sets
  • allow devices to operate in Broadcaster, Observer, Central, and Peripheral roles concurrently
  • adaptive frequency hopping and channel assessment
  • LE channel selection algorithm #2
  • LE power control
  • advertising coding selection
  • encrypted advertising data
  • LE GATT security levels characteristic
  • AdvDataInfo in periodic advertising
  • LE channel classification
  • enhanced attribute protocol
  • advertising channel index
  • GATT caching
  • periodic advertising sync transfer
  • high duty cycle non-connectable advertising
  • LE data packet length extension
  • LE secure connections
  • LE privacy 1.2
  • link layer extended scanner filter policies
  • low duty cycle directed advertising
  • link layer encryption
  • LE ping Espressif Systems 55 ESP32-C61 Series Datasheet v1.0

5 Electrical Characteristics

5.1 Absolute Maximum Ratings

Stresses above those listed in T able5-1 Absolute Maximum Ratingsmay cause permanent damage to the device. These are stress ratings only and normal operation of the device at these or any other conditions beyond those indicated in Section5.2 Recommended Operating Conditionsis not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. Table 5-1. Absolute Maximum Ratings Parameter Description Min Max Unit Input power pins1 Allowed input voltage ⚶0.3 3.6 V Ioutput2 Cumulative IO output current — 1500 mA TSTORE Storage temperature ⚶40 150 °C 1 For more information on input power pins, see Section2.5.1 Power Pins.

2 The product proved to be fully functional after all its IO pins were pulled high

while being connected to ground for 24 consecutive hours at ambient tem- perature of 25 °C.

5.2 Recommended Operating Conditions

Table 5-2. Recommended Operating Conditions Parameter 1 Description Min Typ Max Unit VDDA1, VDDA2, VDDA3P3 Recommended input voltage 3.0 3.3 3.6 V VDDPST1 Recommended input voltage 3.0 3.3 3.6 V VDD_SPI (as input) — 1.8 3.3 3.6 V VDDPST2 2,3 Recommended input voltage 3.0 3.3 3.6 V IV DD Cumulative input current 0.5 — — A 1 See in conjunction with Section2.5 Power Supply. 2 If VDDPST2 is used to power VDD_SPI (see Section2.5.2 Power Scheme), the voltage drop on RSPI should be accounted for. 3 If writing to eFuses, the voltage on VDDPST2 should not exceed 3.3 V as the circuits responsible for burning eFuses are sensitive to higher voltages. Espressif Systems 56 ESP32-C61 Series Datasheet v1.0

5.3 VDD_SPI Output Characteristics

Table 5-3. VDD_SPI Internal and Output Characteristics Parameter Description 1 Typ Unit RSPI VDD_SPI powered by VDD3P3_RTC via RSPI for 3.3 V flash/PSRAM2 3 Ω 1 See in conjunction with Section2.5.2 Power Scheme.

2 VDD3P3_RTC must be more thanVDD_flash_min + I_flash_max × RSPI ;

  • VDD_flash_min – minimum operating voltage of flash/PSRAM
  • I_flash_max – maximum operating current of flash/PSRAM

5.4 ADC Characteristics

The measurements in this section are taken with an external 100 nF capacitor connected to the ADC, using DC signals as input, and at an ambient temperature of 25 °C with disabled Wi-Fi. Table 5-4. ADC Characteristics Symbol Min Max Unit DNL (Differential nonlinearity)1 ⚶5 5 LSB INL (Integral nonlinearity) ⚶5 5 LSB Sampling rate — 2000 kSPS 2

1 To get better DNL results, you can sample multiple times and apply

a filter, or calculate the average value. 2 kSPS means kilo samples-per-second. The calibrated ADC results after hardware calibration andsoftware calibration are shown in T able5-5. For higher accuracy, you may implement your own calibration methods. Table 5-5. ADC Calibration Results Parameter Description Min Max Unit Total error ATTEN0, effective measurement range of 0~ 1000 ⚶10 10 mV ATTEN1, effective measurement range of 0~ 1300 ⚶10 10 mV ATTEN2, effective measurement range of 0~ 1900 ⚶12 12 mV ATTEN3, effective measurement range of 0~ 3300 ⚶15 15 mV

5.5 Current Consumption Characteristics

5.5.1 Current Consumption in Active Mode

The current consumption measurements are taken with a 3.3 V supply at 25 °C ambient temperature. TX current consumption is rated at a 100% duty cycle. RX current consumption is rated when the peripherals are disabled and the CPU idle. Espressif Systems 57 ESP32-C61 Series Datasheet v1.0

Table 5-6. Current Consumption for Wi-Fi (2.4 GHz) in Active Mode Work Mode RF Condition Description Peak (mA) Active (RF working) TX 802.11b, 1 Mbps, DSSS @21 dBm 360 802.11g, 54 Mbps, OFDM @19 dBm 310 802.11n, HT20, MCS7 @18 dBm 285 802.11n, HT40, MCS7 @17 .5 dBm 267 802.11ax, MCS9 @15 dBm 240 RX 802.11b/g/n, HT20 88 802.11n, HT40 90 802.11ax, HE20 88 Table 5-7. Current Consumption for Bluetooth LE in Active Mode Work Mode RF Condition Description Peak (mA) Active (RF working) TX Bluetooth LE @ 18 dBm 283 Bluetooth LE @ 9 dBm 160 Bluetooth LE @ 0 dBm 128 Bluetooth LE @⚶15 dBm 96 RX Bluetooth LE 81

5.5.2 Current Consumption in Other Modes

Table 5-8. Current Consumption in Modem-sleep Mode Typ (mA) Mode CPU Frequency (MHz) Description All Peripherals Clocks Disabled All Peripherals Clocks Enabled1 Modem-sleep2,3 160 WAITI 11 18 CPU while loop 16 23 Run CoreMark 21 28 WAITI 10 16 CPU while loop 12 19 Run CoreMark 15 21 WAITI 6 11 CPU while loop 7 12 Run CoreMark 9 13

1 In practice, the current consumption might be different depending on which peripherals are

enabled. 2 In Modem-sleep mode, Wi-Fi is clock gated. 3 In Modem-sleep mode, the consumption might be higher when accessing flash. Espressif Systems 58 ESP32-C61 Series Datasheet v1.0

Table 5-9. Current Consumption in Low-Power Modes Mode Description Typ (mA) Light-sleep CPU and wireless communication modules are powered down, peripheral clocks are disabled, and all GPIOs are high-impedance 0.2 CPU, wireless communication modules and peripherals are pow- ered down, and all GPIOs are high-impedance 0.05 Deep-sleep LP timer and LP memory are powered on 0.01 Power off CHIP_PU is set to low level, the chip is powered off 0.001

5.6 Memory Specifications

The data below is sourced from the memory vendor datasheet. These values are guaranteed through design and/or characterization but are not fully tested in production. Devices are shipped with the memory erased. Table 5-10. Flash Specifications Parameter Description Min Typ Max Unit VCC Power supply voltage (1.8 V) 1.65 1.80 2.00 V Power supply voltage (3.3 V) 2.7 3.3 3.6 V FC Maximum clock frequency 80 — — MHz — Program/erase cycles 100,000 — — cycles TRET Data retention time 20 — — years TPP Page program time — 0.8 5 ms TSE Sector erase time (4 KB) — 70 500 ms TBE1 Block erase time (32 KB) — 0.2 2 s TBE2 Block erase time (64 KB) — 0.3 3 s TCE Chip erase time (16 Mb) — 7 20 s Chip erase time (32 Mb) — 20 60 s Chip erase time (64 Mb) — 25 100 s Chip erase time (128 Mb) — 60 200 s Chip erase time (256 Mb) — 70 300 s Table 5-11. PSRAM Specifications Parameter Description Min Typ Max Unit VCC Power supply voltage (1.8 V)1.62 1.80 1.98 V Power supply voltage (3.3 V)2.7 3.3 3.6 V FC Maximum clock frequency 80 — — MHz

5.7 Reliability

Espressif Systems 59 ESP32-C61 Series Datasheet v1.0

Table 5-12. Reliability Qualifications Test Item Test Conditions Test Standard HTOL (High Temperature Operating Life) 125 °C, 1000 hours JESD22-A108 ESD (Electro-Static Discharge Sensitivity) HBM (Human Body Mode)1 ± 2000 V JS-001 CDM (Charge Device Mode)2 ± 1000 V JS-002 Latch up Current trigger ± 200 mA JESD78Voltage trigger 1.5 × VDDmax Preconditioning Bake 24 hours @125 °C Moisture soak (level 3: 192 hours @30 °C, 60% RH) IR reflow solder: 260 + 0 °C, 20 seconds, three times J-STD-020, JESD47 , JESD22-A113 TCT (Temperature Cycling Test) ⚶65 °C / 150 °C, 500 cycles JESD22-A104 uHAST (Highly Accelerated Stress Test, unbiased) 130 °C, 85% RH, 96 hours JESD22-A118 HTSL (High Temperature Storage Life) 150 °C, 1000 hours JESD22-A103 LTSL (Low Temperature Storage Life) ⚶40 °C, 1000 hours JESD22-A119 1 JEDEC document JEP155 states that 500 V HBM allows safe manufacturing with a standard ESD control process. 2 JEDEC document JEP157 states that 250 V CDM allows safe manufacturing with a standard ESD control process. Espressif Systems 60 ESP32-C61 Series Datasheet v1.0

6 RF Characteristics

This section contains tables with RF characteristics of the Espressif product. The RF data is measured at the antenna port, where RF cable is connected, including the front-end loss. The front-end circuit is a 0Ω resistor. Devices should operate in the center frequency range allocated by regional regulatory authorities. The target center frequency range and the target transmit power are configurable by software. SeeESP RF TestTooland TestGuide for instructions. Unless otherwise stated, the RF tests are conducted with a 3.3 V (±5%) supply at 25 ºC ambient temperature. 6.1 Wi-Fi Radio (2.4 GHz) Table 6-1. Wi-Fi RF Characteristics Name Description Center frequency range of operating channel2412 ~ 2484 MHz Wi-Fi wireless standard IEEE 802.11b/g/n/ax

6.1.1 Wi-Fi RF Transmitter (TX) Characteristics

Table 6-2. TX Power with Spectral Mask and EVM Meeting 802.11 Standards Min Typ Max Rate (dBm) (dBm) (dBm) 802.11b, 1 Mbps, DSSS — 21.0 — 802.11b, 11 Mbps, CCK — 21.0 — 802.11g, 6 Mbps, OFDM — 20.0 — 802.11g, 54 Mbps, OFDM — 19.0 — 802.11n, HT20, MCS0 — 19.0 — 802.11n, HT20, MCS7 — 18.0 — 802.11n, HT40, MCS0 — 18.5 — 802.11n, HT40, MCS7 — 17 .5 — 802.11ax, HE20, MCS0 — 19.0 — 802.11ax, HE20, MCS9 — 15.0 — Table 6-3. TX EVM Test1 Min Typ Limit Rate (dB) (dB) (dB) 802.11b, 1 Mbps, DSSS — ⚶24.8 ⚶10.0 802.11b, 11 Mbps, CCK — ⚶24.8 ⚶10.0 Cont’d on next page Espressif Systems 61 ESP32-C61 Series Datasheet v1.0

Table 6-3 – cont’d from previous page Min Typ Limit Rate (dB) (dB) (dB) 802.11g, 6 Mbps, OFDM — ⚶26.0 ⚶5.0 802.11g, 54 Mbps, OFDM — ⚶29.0 ⚶25.0 802.11n, HT20, MCS0 — ⚶24.5 ⚶5.0 802.11n, HT20, MCS7 — ⚶31.5 ⚶27 .0 802.11n, HT40, MCS0 — ⚶26.8 ⚶5.0 802.11n, HT40, MCS7 — ⚶30.5 ⚶27 .0 802.11ax, HE20, MCS0 — ⚶26.0 ⚶5.0 802.11ax, HE20, MCS9 — ⚶34.0 ⚶32.0

1 EVM is measured at the corresponding typical TX power provided

in T able6-2 Wi-Fi RF Transmitter (TX) Characteristicsabove.

6.1.2 Wi-Fi RF Receiver (RX) Characteristics

For RX tests, the PER (packet error rate) limit is 8% for 802.11b, and 10% for 802.11g/n/ax. Table 6-4. RX Sensitivity Min Typ Max Rate (dBm) (dBm) (dBm) 802.11b, 1 Mbps, DSSS — ⚶99.5 — 802.11b, 2 Mbps, DSSS — ⚶96.5 — 802.11b, 5.5 Mbps, CCK — ⚶94.0 — 802.11b, 11 Mbps, CCK — ⚶90.0 — 802.11g, 6 Mbps, OFDM — ⚶94.0 — 802.11g, 9 Mbps, OFDM — ⚶93.0 — 802.11g, 12 Mbps, OFDM — ⚶92.0 — 802.11g, 18 Mbps, OFDM — ⚶90.0 — 802.11g, 24 Mbps, OFDM — ⚶87 .0 — 802.11g, 36 Mbps, OFDM — ⚶83.5 — 802.11g, 48 Mbps, OFDM — ⚶79.0 — 802.11g, 54 Mbps, OFDM — ⚶77 .5 — 802.11n, HT20, MCS0 — ⚶94.0 — 802.11n, HT20, MCS1 — ⚶92.5 — 802.11n, HT20, MCS2 — ⚶89.5 — 802.11n, HT20, MCS3 — ⚶86.5 — 802.11n, HT20, MCS4 — ⚶83.0 — 802.11n, HT20, MCS5 — ⚶79.0 — 802.11n, HT20, MCS6 — ⚶77 .0 — 802.11n, HT20, MCS7 — ⚶75.5 — 802.11n, HT40, MCS0 — ⚶91.0 — 802.11n, HT40, MCS1 — ⚶90.0 — Cont’d on next page Espressif Systems 62 ESP32-C61 Series Datasheet v1.0

Table 6-4 – cont’d from previous page Min Typ Max Rate (dBm) (dBm) (dBm) 802.11n, HT40, MCS2 — ⚶87 .0 — 802.11n, HT40, MCS3 — ⚶83.5 — 802.11n, HT40, MCS4 — ⚶80.5 — 802.11n, HT40, MCS5 — ⚶76.0 — 802.11n, HT40, MCS6 — ⚶74.5 — 802.11n, HT40, MCS7 — ⚶73.5 — 802.11ax, HE20, MCS0 — ⚶94.0 — 802.11ax, HE20, MCS1 — ⚶91.0 — 802.11ax, HE20, MCS2 — ⚶88.0 — 802.11ax, HE20, MCS3 — ⚶85.5 — 802.11ax, HE20, MCS4 — ⚶82.0 — 802.11ax, HE20, MCS5 — ⚶78.0 — 802.11ax, HE20, MCS6 — ⚶76.5 — 802.11ax, HE20, MCS7 — ⚶74.5 — 802.11ax, HE20, MCS8 — ⚶71.0 — 802.11ax, HE20, MCS9 — ⚶68.0 — Table 6-5. Maximum RX Level Min Typ Max Rate (dBm) (dBm) (dBm) 802.11b, 1 Mbps, DSSS — 5 — 802.11b, 11 Mbps, CCK — 5 — 802.11g, 6 Mbps, OFDM — 5 — 802.11g, 54 Mbps, OFDM — 0 — 802.11n, HT20, MCS0 — 5 — 802.11n, HT20, MCS7 — 0 — 802.11n, HT40, MCS0 — 5 — 802.11n, HT40, MCS7 — 0 — 802.11ax, HE20, MCS0 — 5 — 802.11ax, HE20, MCS9 — 0 — Table 6-6. RX Adjacent Channel Rejection Min Typ Max Rate (dB) (dB) (dB) 802.11b, 1 Mbps, DSSS — 38 — 802.11b, 11 Mbps, CCK — 38 — 802.11g, 6 Mbps, OFDM — 33 — 802.11g, 54 Mbps, OFDM — 16 — Cont’d on next page Espressif Systems 63 ESP32-C61 Series Datasheet v1.0

Table 6-6 – cont’d from previous page Min Typ Max Rate (dB) (dB) (dB) 802.11n, HT20, MCS0 — 32 — 802.11n, HT20, MCS7 — 17 — 802.11n, HT40, MCS0 — 24 — 802.11n, HT40, MCS7 — 13 — 802.11ax, HE20, MCS0 — 37 — 802.11ax, HE20, MCS9 — 13 —

6.2 Bluetooth 5 (LE) Radio

Table 6-7. Bluetooth LE RF Characteristics Name Description Center frequency range of operating channel2402 ~ 2480 MHz RF transmit power range ⚶15 ~ 20 dBm

6.2.1 Bluetooth LE RF Transmitter (TX) Characteristics

Table 6-8. Bluetooth LE - Transmitter Characteristics - 1 Mbps Parameter Description Min Typ Max Unit Carrier frequency offset and drift Modulation characteristics ∆ F1avg — 250.0 — kHz Min. ∆ F2max (for at least 99.9% of all∆ F2max) — 243.0 — kHz ∆ F2avg/∆ F1avg — 0.88 — — In-band emissions ± 2 MHz offset — ⚶27 — dBm ± 3 MHz offset — ⚶36 — dBm > ± 3 MHz offset — ⚶42 — dBm Table 6-9. Bluetooth LE - Transmitter Characteristics - 2 Mbps Parameter Description Min Typ Max Unit Carrier frequency offset and drift Modulation characteristics ∆ F1avg — 499.4 — kHz Cont’d on next page Espressif Systems 64 ESP32-C61 Series Datasheet v1.0

Table 6-9 – cont’d from previous page Parameter Description Min Typ Max Unit Min. ∆ F2max (for at least 99.9% of all∆ F2max) — 532.0 — kHz ∆ F2avg/∆ F1avg — 0.95 — — In-band emissions ± 4 MHz offset — ⚶41 — dBm ± 5 MHz offset — ⚶44 — dBm > ± 5 MHz offset — ⚶45 — dBm Table 6-10. Bluetooth LE - Transmitter Characteristics - 125 Kbps Parameter Description Min Typ Max Unit Carrier frequency offset and drift Modulation characteristics ∆ F1avg — 253.1 — kHz Min. ∆ F1max (for at least 99.9% of all∆ F1max) — 270.5 — kHz In-band emissions ± 2 MHz offset — ⚶27 — dBm ± 3 MHz offset — ⚶38 — dBm > ± 3 MHz offset — ⚶43 — dBm Table 6-11. Bluetooth LE - Transmitter Characteristics - 500 Kbps Parameter Description Min Typ Max Unit Carrier frequency offset and drift Modulation characteristics ∆ F2avg — 223.4 — kHz Min. ∆ F2max (for at least 99.9% of all∆ F2max) — 243.5 — kHz In-band emissions ± 2 MHz offset — ⚶27 — dBm ± 3 MHz offset — ⚶37 — dBm > ± 3 MHz offset — 43 — dBm

6.2.2 Bluetooth LE RF Receiver (RX) Characteristics

Table 6-12. Bluetooth LE - Receiver Characteristics - 1 Mbps Parameter Description Min Typ Max Unit Sensitivity @30.8% PER — — ⚶98.0 — dBm Maximum received signal @30.8% PER — — 8 — dBm Cont’d on next page Espressif Systems 65 ESP32-C61 Series Datasheet v1.0

Table 6-12 – cont’d from previous page Parameter Description Min Typ Max Unit C/I and receiver selectivity performance Co-channel F = F0 MHz — 7 — dB Adjacent channel F = F0 + 1 MHz — ⚶2 — dB F = F0 – 1 MHz — ⚶3 — dB F = F0 + 2 MHz — ⚶34 — dB F = F0 – 2 MHz — ⚶27 — dB F = F0 + 3 MHz — ⚶33 — dB F = F0 – 3 MHz — ⚶40 — dB F ≥ F0 + 4 MHz — ⚶27 — dB F ≤ F0 – 4 MHz — ⚶53 — dB Image frequency — — ⚶35 — dB Adjacent channel to image frequency F = Fimage + 1 MHz — ⚶34 — dB F = Fimage – 1 MHz — ⚶33 — dB

30 MHz~ 2000 MHz — ⚶20 — dBm

Out-of-band blocking performance 2003 MHz~ 2399 MHz — ⚶25 — dBm

2484 MHz~ 2997 MHz — ⚶25 — dBm

3000 MHz~ 12.75 GHz — ⚶10 — dBm Intermodulation — — ⚶32 — dBm Table 6-13. Bluetooth LE - Receiver Characteristics - 2 Mbps Parameter Description Min Typ Max Unit Sensitivity @30.8% PER — — ⚶94.0 — dBm Maximum received signal @30.8% PER — — 8 — dBm C/I and receiver selectivity performance Co-channel F = F0 MHz — 9 — dB Adjacent channel F = F0 + 2 MHz — ⚶7 — dB F = F0 – 2 MHz — ⚶6 — dB F = F0 + 4 MHz — ⚶21 — dB F = F0 – 4 MHz — ⚶27 — dB F = F0 + 6 MHz — ⚶38 — dB F = F0 – 6 MHz — ⚶41 — dB F ≥ F0 + 8 MHz — ⚶46 — dB F ≤ F0 – 8 MHz — ⚶46 — dB Image frequency — — ⚶21 — dB Adjacent channel to image frequency F = Fimage + 2 MHz — ⚶38 — dB F = Fimage – 2 MHz — ⚶7 — dB

30 MHz~ 2000 MHz — ⚶25 — dBm

Out-of-band blocking performance 2003 MHz~ 2399 MHz — ⚶25 — dBm 3000 MHz~ 12.75 GHz — ⚶10 — dBm Intermodulation — — ⚶31 — dBm Espressif Systems 66 ESP32-C61 Series Datasheet v1.0

Table 6-14. Bluetooth LE - Receiver Characteristics - 125 Kbps Parameter Description Min Typ Max Unit Sensitivity @30.8% PER — — ⚶106.0 — dBm Maximum received signal @30.8% PER — — 8 — dBm C/I and receiver selectivity performance Co-channel F = F0 MHz — 4 — dB Adjacent channel F = F0 + 1 MHz — ⚶2 — dB F = F0 – 1 MHz — ⚶3 — dB F = F0 + 2 MHz — ⚶33 — dB F = F0 – 2 MHz — ⚶36 — dB F = F0 + 3 MHz — ⚶35 — dB F = F0 – 3 MHz — ⚶50 — dB F ≥ F0 + 4 MHz — ⚶31 — dB F ≤ F0 – 4 MHz — ⚶50 — dB Image frequency — — ⚶31 — dB Adjacent channel to image frequency F = Fimage + 1 MHz — ⚶36 — dB F = Fimage – 1 MHz — ⚶35 — dB Table 6-15. Bluetooth LE - Receiver Characteristics - 500 Kbps Parameter Description Min Typ Max Unit Sensitivity @30.8% PER — — ⚶102.0 — dBm Maximum received signal @30.8% PER — — 8 — dBm C/I and receiver selectivity performance Co-channel F = F0 MHz — 4 — dB Adjacent channel F = F0 + 1 MHz — ⚶4 — dB F = F0 – 1 MHz — ⚶3 — dB F = F0 + 2 MHz — ⚶32 — dB F = F0 – 2 MHz — ⚶36 — dB F = F0 + 3 MHz — ⚶35 — dB F = F0 – 3 MHz — ⚶50 — dB F ≥ F0 + 4 MHz — ⚶29 — dB F ≤ F0 – 4 MHz — ⚶50 — dB Image frequency — — ⚶29 — dB Adjacent channel to image frequency F = Fimage + 1 MHz — ⚶36 — dB F = Fimage – 1 MHz — ⚶35 — dB Espressif Systems 67 ESP32-C61 Series Datasheet v1.0

7 Packaging

  • For information about tape, reel, and chip marking, please refer to ESP32-C61 Chip Packaging Information.
  • The pins of the chip are numbered in anti-clockwise order starting from Pin 1 in the top view. For pin numbers and pin names, see also Figure2-1 ESP32-C61HR2 & ESP32-C61HR8 & ESP32-C61HF4 Pin Layout (Top View)and 2-2 ESP32-C61NF8R8LA Pin Layout (Top View).
  • The recommended land patternsource file (asc) is available for download. You can import the file with software such as PADS and Altium Designer. PIN #1 DDT BY MARKING 5,000±0,050 40L SLP (5x5MM) TOP VIEw SLP MAX, 0,900 A N□M, 0,850 MIN, 0,800 3,300±0,050 Exp.DAP PIN #1 IDENTIFICA TI□N L CHAMFER 0,300 x 45° 0.400±0,050 L 0.200±0,050j L 0.400 Bsc.j BOTTOM VIEw ! Lc:=:==:J 0.000-0.D SIDE VIEw 3,300±0,050 Exp.DAP t0,203 Ref t Figure 7-1. QFN40 (5×5 mm) Package Espressif Systems 68 ESP32-C61 Series Datasheet v1.0

D aaa C A E B aaa C PIN #1 CORNER Top View A ccc C CC CAVITY SEATING PLANE Side View Bottom View 1120 31 40 e 4×L140×L 40×b bbb C A B ddd C eee C A B eee C A B PIN #1H DRAWING NO. REV. DIMENSION AND TOLERANCES SCALE PACKAGE OUTLINE DRAWING [产品外形图] PAGE ASME Y14.5M TITLE: DESIGN PROJECTION SIZE MM SIGNATURE AREA APPROVE CHECK DESIGN APPROVE PROCESS STAND.UNIT 甬矽电子 FOREHOPE ELECTRONIC FOREHOPE CONFIDENTIAL-BThis document and its information herein are the property of Forehope and all unauthorized use and reproduction are prohibited. 14:1 symbol Dimension in mm Dimension in inch MIN NOM MAX MIN NOM MAX aaa 0.100 0.004 bbb 0.150 0.006 ccc 0.100 0.004 ddd 0.080 0.003 eee 0.150 0.006 TECHNOLOGY SPECIFICATION[技术要求] 1.BAN TO USE THE LEVEL 1 ENVIRONMENT-RELATED SUBSTANCES； [禁止使用一级环境管理物质；]

1 OF 1

KE Chen 2025.11.28 YL Zhou 2025.11.28 LGA-5X5-41 (P0.4 T0.9) Unit: mm Figure 7-2. LGA40 (5×5 mm) Package Espressif Systems 69 ESP32-C61 Series Datasheet v1.0

Related Documentation and Resources Related Documentation and Resources Related Documentation

  • ESP32-C61 TechnicalReference Manual – Detailed information on how to use the ESP32-C61 memory and pe- ripherals.
  • ESP32-C61 Hardware Design Guidelines – Guidelines on how to integrate the ESP32-C61 into your hardware product.
  • Certificates https:/ /espressif.com/en/support/documents/certificates
  • ESP32-C61 Product/Process Change Notifications (PCN) https:/ /espressif.com/en/support/documents/pcns?keys=ESP32-C61
  • ESP32-C61 Advisories– Information on security, bugs, compatibility, component reliability. https:/ /espressif.com/en/support/documents/advisories?keys=ESP32-C61
  • Documentation Updates and Update Notification Subscription https:/ /espressif.com/en/support/download/documents Developer Zone
  • ESP-IDF ProgrammingGuide for ESP32-C61 – Extensive documentation for the ESP-IDF development framework.
  • ESP-IDF and other development frameworks on GitHub. https:/ /github.com/espressif
  • ESP32 BBS Forum– Engineer-to-Engineer (E2E) Community for Espressif products where you can post questions, share knowledge, explore ideas, and help solve problems with fellow engineers. https:/ /esp32.com/
  • ESP-FAQ– A summary document of frequently asked questions released by Espressif. https:/ /espressif.com/projects/esp-faq/en/latest/index.html
  • The ESP Journal– Best Practices, Articles, and Notes from Espressif folks. https:/ /blog.espressif.com/
  • See the tabsSDKs and Demos, Apps, Tools, AT Firmware. https:/ /espressif.com/en/support/download/sdks-demos Products
  • ESP32-C61 Series SoCs– Browse through all ESP32-C61 SoCs. https:/ /espressif.com/en/products/socs?id=ESP32-C61
  • ESP32-C61 Series Modules– Browse through all ESP32-C61-based modules. https:/ /espressif.com/en/products/modules?id=ESP32-C61
  • ESP32-C61 Series DevKits– Browse through all ESP32-C61-based devkits. https:/ /espressif.com/en/products/devkits?id=ESP32-C61
  • ESP Product Selector– Find an Espressif hardware product suitable for your needs by comparing or applying filters. https:/ /products.espressif.com/#/product-selector?language=en Contact Us
  • See the tabsSales Questions, Technical Enquiries, Circuit Schematic & PCB Design Review, Get Samples (Online stores),Become Our Supplier, Comments & Suggestions. https:/ /espressif.com/en/contact-us/sales-questions Espressif Systems 70 ESP32-C61 Series Datasheet v1.0

Appendix A – ESP32-C61 Consolidated Pin Overview Appendix A – ESP32-C61 Consolidated Pin Overview Table 7-1. Pin Overview Pin Pin Pin Pin Providing Pin Settings IO MUX Function LP IO MUX Function Analog Function No. Name Type Power At Reset After Reset F0 Type F1 Type F2 Type F0 F0 F1

6 XTAL_32K_P I/O/T VDDPST1 – – GPIO0 I/O/T GPIO0 I/O/T – – LP_GPIO0 XTAL_32K_P –

7 XTAL_32K_N I/O/T VDDPST1 – – GPIO1 I/O/T GPIO1 I/O/T – – LP_GPIO1 XTAL_32K_N ADC1_CH0

8 GPIO2 I/O/T VDDPST1 – – GPIO2 I/O/T GPIO2 I/O/T FSPIQ I1/O/T LP_GPIO2 – –

9 MTMS I/O/T VDDPST1 IE IE MTMS I1 GPIO3 I/O/T FSPIHD I1/O/T LP_GPIO3 – ADC1_CH1

10 MTDI I/O/T VDDPST1 IE IE MTDI I1 GPIO4 I/O/T FSPIWP I1/O/T LP_GPIO4 – ADC1_CH2

11 MTCK I/O/T VDDPST1 – IE* MTCK I1 GPIO5 I/O/T – – LP_GPIO5 – ADC1_CH3

12 MTDO I/O/T VDDPST1 – IE MTDO O/T GPIO6 I/O/T FSPICLK I1/O/T LP_GPIO6 – –

13 SDIO_CMD I/O/T VDDPST2 – IE SDIO_CMD I1/O/T GPIO25 I/O/T – – – – –

14 SDIO_CLK I/O/T VDDPST2 – IE SDIO_CLK I1 GPIO26 I/O/T – – – – –

15 SDIO_DATA0 I/O/T VDDPST2 – IE SDIO_DATA0 I1/O/T GPIO27 I/O/T – – – – –

16 SDIO_DATA1 I/O/T VDDPST2 – IE SDIO_DATA1 I1/O/T GPIO28 I/O/T – – – – –

17 SDIO_DATA2 I/O/T VDDPST2 – IE SDIO_DATA2 I1/O/T GPIO22 I/O/T – – – – –

18 SDIO_DATA3 I/O/T VDDPST2 – IE SDIO_DATA3 I1/O/T GPIO23 I/O/T – – – – –

19 SPICS1/NC I/O/T VDD_SPI/VDDPST2 – – SPICS1 O/T GPIO14 I/O/T – – – – –

20 SPICS0/NC I/O/T VDD_SPI/VDDPST2 – – SPICS0 O/T GPIO15 I/O/T – – – – –

22 SPIQ/NC I/O/T VDD_SPI/VDDPST2 – – SPIQ I1/O/T GPIO16 I/O/T – – – – –

23 SPIWP/NC I/O/T VDD_SPI/VDDPST2 – – SPIWP I1/O/T GPIO17 I/O/T – – – – –

24 VDD_SPI/NC Power VDDPST2 – – GPIO18 I/O/T GPIO18 I/O/T – – – VDD_SPI –

25 SPIHD/NC I/O/T VDD_SPI/VDDPST2 – – SPIHD I1/O/T GPIO19 I/O/T – – – – –

26 SPICLK/NC O VDD_SPI/VDDPST2 – – SPICLK O/T GPIO20 I/O/T – – – – –

27 SPID/NC I/O/T VDD_SPI/VDDPST2 – – SPID I1/O/T GPIO21 I/O/T – – – – –

28 USB_D- I/O/T VDDPST2 – IE GPIO12 I/O/T GPIO12 I/O/T – – – USB_D- –

29 USB_D+ I/O/T VDDPST2 – IE,WPU* GPIO13 I/O/T GPIO13 I/O/T – – – USB_D+ –

30 GPIO24 I/O/T VDDPST2 – – GPIO24 I/O/T GPIO24 I/O/T – – – – –

31 GPIO8 I/O/T VDDPST2 IE IE GPIO8 I/O/T GPIO8 I/O/T FSPICS0 I1/O/T – ZCD0 –

32 GPIO9 I/O/T VDDPST2 IE,WPU IE,WPU GPIO9 I/O/T GPIO9 I/O/T – – – ZCD1 –

33 U0RXD I/O/T VDDPST2 – IE,WPU U0RXD I1 GPIO10 I/O/T – – – – –

34 U0TXD I/O/T VDDPST2 – IE,WPU U0TXD O GPIO11 I/O/T – – – – –

35 GPIO29 I/O/T VDDPST2 – – GPIO29 I/O/T GPIO29 I/O/T – – – – –

36 GPIO7 I/O/T VDDPST2 IE IE GPIO7 I/O/T GPIO7 I/O/T FSPID I1/O/T – – –

  • For details, see Section2 Pins. Regarding highlighted cells, see Section2.3.4 Restrictions for GPIOs and LP GPIOs. Espressif Systems 71 ESP32-C61 Series Datasheet v1.0

Revision History

Date Version Release notes 2026-01-20 v1.0

  • Updated the ”Ordering Code” to ”Part Number” in T able1-1 Comparison
  • Updated the pin VDD_SPI to NC for ESP32-C61HF4 2025-11-18 v0.6
  • Added the new variant ESP32-C61NF8R8LA, and updated section2.1 Pin Layout
  • Updated figure3-1 Visualization of Timing Parameters for the Strapping Pins
  • Updated figure7 Packaging by removing the TSLP 2025-08-05 v0.5 Preliminary release 2025-04-22 v0.3
  • Updated Chapter2 Pins
  • Added Section4.2.1.7SDIO Slave Controller
  • Updated Section4.1.3.1IO MUX and GPIO Matrix
  • Updated Section4.1.3.4Interrupt Matrix 2024-08-26 v0.2
  • Updated the package from QFN32 to QFN40
  • Added chip series ESP32-C61HF4R2, and removed ESP32-C61NR4 and ESP32-C31 chip series
  • Updated section1 ESP32-C61 Series Comparison, section2 Pins, sec- tion 3 Boot Configurationsand AppendixESP32-C61 Consolidated Pin Overview
  • Updated CoreMark score
  • Updated section Applications 2024-01-23 v0.1 Draft Espressif Systems 72 ESP32-C61 Series Datasheet v1.0

Disclaimer and Copyright Notice Information in this document, including URL references, is subject to change without notice. ALL THIRD PARTY’S INFORMATION IN THIS DOCUMENT IS PROVIDED AS IS WITH NO WARRANTIES TO ITS AUTHENTICITY AND ACCURACY . NO WARRANTY IS PROVIDED TO THIS DOCUMENT FOR ITS MERCHANTABILITY , NON-INFRINGEMENT , FITNESS FOR ANY PARTICULAR PURPOSE, NOR DOES ANY WARRANTY OTHERWISE ARISING OUT OF ANY PROPOSAL, SPECIFICATION OR SAMPLE. All liability, including liability for infringement of any proprietary rights, relating to use of information in this document is disclaimed. No licenses express or implied, by estoppel or otherwise, to any intellectual property rights are granted herein. The Wi-Fi Alliance Member logo is a trademark of the Wi-Fi Alliance. The Bluetooth logo is a registered trademark of Bluetooth SIG. All trade names, trademarks and registered trademarks mentioned in this document are property of their respective owners, and are hereby acknowledged. Copyright © 2026 Espressif Systems (Shanghai) Co., Ltd. All rights reserved. www.espressif.com