ESMD-C50H_1 MACOM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • LO Power +17 dBm
  • Up to +14 dBm RF
  • Surface Mount
  • Tape and reel packaging available

Description

M/A-COM’s ESMD-C50H is a Low Cost, Passive Double Double Balanced Mixer. Constructed using very broad band ferrite balun transformers and matched silicon sch ottky diodes, it’s performance is especially suited to high dynamic range receivers. Given it’s high 1dB compression point, the ESMD- C50H is also suitable for Transmitter upconversion at any frequency up to 2.5GHz. Parts are packaged in tape & reel.

Ordering Information

ESMD-C50HTR Tape and Reel (500 piece Reel) Electrical Specifications: TA = 25°C, Z0 = 50Ω 1 Parameter Test Conditions Frequency Units Min Typ Max Frequency IF 1.0 dB bandwidth = DC - 1000 MHz 80 -2500 MHz — — — Conversion Loss — 80 - 1000 1000 - 2500 dB dB 6.1 7.34 7.5 9.0 Isolation LO to RF 80 - 1000 1000 - 2500 dB dB 33.5 28.9 Isolation LO to IF 80 - 1000 1000 - 2500 dB dB 13.5 31.5 17.4 Isolation RF to IF 80 - 1000 1000 - 2500 dB dB 26.9 25.9 VSWR LO 80 - 1000 1000 - 2500 — — 1.42 1.63 2.0 2.5 VSWR RF 80 - 1000 1000 - 2500 — — 1.72 1.71 2.8 2.4 VSWR IF DC - 600 — — 2.55 3.2 Input IP3 — 200 - 1000 1000 - 2500 dBm dBm Input 1 dB Compression — 80 -2500 dBm — 14.0 —

E-Series Surface Mount Mixer 80 – 2500 MHz ESMD-C50H M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information.

  • North America Tel: 800.366.2266 / Fax: 978.366.2266 Visit www.macom.com for additional data sheets and product information. Pin Configuration Pin No. Function 1 RF 2 LO 3 IF

4 Ground

5 Ground

6 Ground

Absolute Maximum Ratings 1 1. Operation of this device above any one of these parameters may cause permanent damage. Parameter Absolute Maximum RF Input Power +23 dBm LO Drive Power +23 dBm Operating Temperature -40°C to +85°C Storage Temperature -55°C to +125°C Schematic

E-Series Surface Mount Mixer 80 – 2500 MHz ESMD-C50H M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information.

  • North America Tel: 800.366.2266 / Fax: 978.366.2266 Visit www.macom.com for additional data sheets and product information. Isolation LO & RF VSWR IF VSWR Typical Performance Curves Conversion Loss IF Bandwidth -16 -14 -12 -10 480 880 1280 1680 2080 2480 2880 Freq (MHz) dB IIP3 & 1 dB Compression -50.00 -40.00 -30.00 -20.00 -10.00 430 850 1270 1690 2110 2530 2950 Freq (MHz) dB LO t o RF LO to IF RF-IF 0.50 1.00 1.50 2.00 2.50 3.00 430 850 1270 1690 2110 2530 2950 Freq (MHz) VSWR 1.00 1.50 2.00 2.50 3.00 110 190 270 350 430 510 590 Freq (MHz) VSWR -10.00 -9.00 -8.00 -7.00 -6.00 -5.00 -4.00 170 310 450 585 725 860 1000 IF Bandwidth (MHz) Relative Power (dB) 0.00 5.00 10.00 15.00 20.00 25.00 30.00 200 600 1000 1400 1800 2200 2600 3000 Freq (MHz) Power (dBm) 1d B IIP3

E-Series Surface Mount Mixer 80 – 2500 MHz ESMD-C50H M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information.

  • North America Tel: 800.366.2266 / Fax: 978.366.2266 Visit www.macom.com for additional data sheets and product information. Spurious Table: 900MHz (In dBc below IF, assuming down conversion) nfLO - mfRF

0 X 2 14 12 29

(n) 3 46 41 44 43 44 4 57 56 54 55 57 0 1 2 3 4 LO (m) Spurious Table: 1800MHz (In dBc below IF, assuming down conversion) nfLO - mfRF

0 X -6 12 21 13

(n) 3 76 80 78 76 73 4 83 85 85 82 85.34 0 1 2 3 4 LO (m) RF = 1842.50 MHz, -5dBm LO = 1772.50 MHz, +17dBm IF = 70 MHz Spurious Table: 1900MHz (In dBc below IF, assuming down conversion) nfLO - mfRF

0 X -8 21 16 19

(n) 3 51 46 51 41 50 4 52 55 55 52 55 0 1 2 3 4 LO (m) RF = 1960 MHz, -5dBm LO = 1890 MHz, +17dBm IF = 70 MHz RF = 970 MHz, -5dBm LO = 900 MHz, +17dBm IF = 70 MHz