ESMD-C50H MA-COM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
- LO Power +17 dBm
- Up to +14 dBm RF
- Surface Mount
Description
M/A-COM’s ESMD-C50H is a Low Cost, Passive Double Double Balanced Mixer. Constructed using very broad band ferrite balun transformers and matched silicon schottky diodes, it’s performance is especially suited to high dynamic range receivers. Given it’s high 1dB compression point, the ESMD- C50H is also suitable for Transmitter upconversion at any frequency up to 2.5GHz. Electrical Specifications @ +25°C Parameter Units Minimum Typical Maximum Mean (x) Sigma (σ) Frequency Range 80 - 2500 MHz IF 1.0 dB Bandwidth = DC - 1000 MHz Conversion Loss 80 - 1000 MHz 1000 - 2500 MHz dB dB 7.5 9.0 6.10 7.34 0.15 0.29 L - R Isolation 80 - 1000 MHz 1000 - 2500 MHz dB dB 25.0 20.0 33.5 28.9 L - I Isolation 80 - 1000 MHz 1000 - 2500 MHz dB dB 26.0 13.5 31.5 17.4 R - I Isolation 80 - 1000 MHz 1000 - 2500 MHz dB dB 20.0 20.0 26.9 25.9 LO VSWR 80 - 1000 MHz 1000 - 2500 MHz 1.42 1.63 2.0 2.5 RF VSWR 80 - 1000 MHz 1000 - 2500 MHz 1.72 1.71 2.8 2.4 IF VSWR DC - 600 MHz — — 2.55 3.2 — — Input IP3 200 - 1000 MHz 1000 - 2500 MHz dBm dBm 21.0 18.0 27.0 25.0 Input 1dB Compression dBm — +14.0 — — — E-Series Surface Mount Mixer 80 – 2500 MHz ESMD-C50H Schematic Part Number Packaging ESMD-C50H Tube ESMD-C50HTR Tape and Reel Test Conditions: LO Drive = +17dBm, IF frequency = 70MHz. Mean and Sigma calculated at 900MHz & 1800MHz.
E-Series Surface Mount Mixer — 80 - 2500 MHz ESMD-C50H V2.00 S 1254 D Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Absolute Maximum Ratings Parameter Absolute Maximum RF Input Power +23dBm LO Drive Power +23 dBm Operating/Storage Temperature -40°C to +85°C Pin Configuration Function Pin No. RF 1 LO 2 IF 3 Ground 4,5,6 Typical Performance @ +25°C Isolation -50.00 -45.00 -40.00 -35.00 -30.00 -25.00 -20.00 -1 5.00 -1 0.00 Frequency (M Hz) LO to IF LO t o RF RF to IF -16.00 -14.00 -12.00 -10.00 -8.00 -6.00 -4.00 -2.00 280 480 680 880 1080 1280 1480 1680 1880 2080 2280 2480 2680 2880 Frequency (MHz) Conversion Loss (dB) +17dBm Conversion Loss - 11. 0 0 -1 0.00 -9.00 -8.00 -7.00 -6.00 -5.00 -4.00 -3.00 35 1 05 1 7 0 240 31 0 380 45 0 5 1 5 5 85 65 5 7 25 7 95 860 930 1 000 IF Bandwidt h (M Hz) IF Bandwidth IP3 and 1dB Compression 0.00 5.00 10.00 15.00 20.00 25.00 30.00 35.00 40.00 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000 Frequency (MHz) Power (dBm) IIP3 1dB Compression VSWR 0.50 1. 0 0 1. 50 2.00 2.50 3.00 R F & LO Frequency ( M Hz) RF LO IF IF Frequency (M Hz) 110 150 190 230 270 310 350 390 430 470 510 550 590 Note: Conversion Loss measured with fixed IF frequency of 70MHz. All measurements made with input power of +17dBm. Isolation (dB) 220 430 640 850 1060 1270 1480 1690 1900 2110 2320 2530 2740 2950 VSWR 220 430 640 850 1060 1270 1480 1690 1900 2110 2320 2530 2740 2950 Frequency (MHz) RF & LO Frequency (MHz) Relative Power (dBm)
E-Series Surface Mount Mixer — 80 - 2500 MHz ESMD-C50H V2.00 S 1254 D Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Spurious Table: 900MHz (In dBc below IF, assuming down conversion) nfLO - mfRF
0 X 2 14 12 29
(n) 3 46 41 44 43 44 4 57 56 54 55 57 0 1 2 3 4 LO (m) Spurious Table: 1800MHz (In dBc below IF, assuming down conversion) nfLO - mfRF
0 X -6 12 21 13
(n) 3 76 80 78 76 73 4 83 85 85 82 85.34 0 1 2 3 4 LO (m) RF = 1842.50 MHz, -5dBm LO = 1772.50 MHz, +17dBm IF = 70 MHz RF = 970 MHz, -5dBm LO = 900 MHz, +17dBm IF = 70 MHz Spurious Table: 1900MHz (In dBc below IF, assuming down conversion) nfLO - mfRF
0 X -8 21 16 19
(n) 3 51 46 51 41 50 4 52 55 55 52 55 0 1 2 3 4 LO (m) RF = 1960 MHz, -5dBm LO = 1890 MHz, +17dBm IF = 70 MHz