FFSD SAMTEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
NO. PINS PER ROW - END OPTION - OVERALL LENGTH - 01 - N - OTHER OPTION FFSD = Socket Strip –04, –05,–06, –08, –10, –11, –12, –13, –15, –17, –20, –25 (Standard sizes) = Single End = Double End –“XX.XX” = Assembled Length = Notch Polarization (Notch option not available with -04 position) –RW = Reverse Wiring (Red wire opposite position #1) –D “XX” = Daisy Chain –SR = Strain Relief (Mates only with ESHF Series) (Not available with –O, –M, –R or –DXX) = Reverse = Middle Reverse (Requires –DXX) = Outside Reverse (Requires –DXX) SPECIFICATIONS Insulator Material: PBT Contact: BeCu Plating: 10 µ" (0.25 µm) Au over 50 µ" (1.27 µm) Ni on contact area; Sn over 50 µ" (1.27 µm) Ni on balance Wire:
30 AWG
Current Rating (FFSD/FTSH):
2.3 A per pin
(2 pins powered) Operating Temp Range: -40 °C to +105 °C Lead Size Accepted: (0.41 mm) .016" SQ Insertion Depth: (2.64 mm) .104" to (3.17 mm) .125" FFSD Mates: FTS, FTSH, EHF, SHF, ESHF Note: This Series is non-standard, non-returnable. Single End (—S) Double End (—D) Daisy Chain (—D “XX”) “XX” ± 1/8" (101.60 mm) 4.00 min. (50.8 mm) 2.00 min. Strain Relief (—SR) No. of positions x (3.05) .120 No. of positions x (5.08) .200 Middle Reverse (—M)Reverse (—R) Outside Reverse (—O) Reverse Wiring (—RW) Assembled Length (—“XX.XX”) Assembled Length in INCHES (1/8") 1 inch minimum Other Sizes (MOQ Required) ALSO AVAILABLE TIGER EYE™ FLAT IDC WIRE CABLES (1.27 mm) .050" PITCH • FFSD SERIES samtec.com?FFSD Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtec’s specifications which are subject to change without notice. TIGER EYE IDC F-221