ESCC-3009

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

The AVX Space BME (Base Metal Electrode) X7R surface mount MLCC utilises leading edge technology in MLCC construction and material processing. The BME technology delivers a superior capacitance voltage capability compared to conventional PME (Precious Metal Electrode) technologies with the reliability levels demanded by the space industry. The availability of higher capacitance values in smaller case sizes not only reduces the amount of board space required by the engineer but also the weight of the complete PCB. These surface mount components also incorporate Flexiterm ®, which greatly improves the resistance to the mechanical stress experienced by MLCCs Space Level BME X7R MLCC ESCC QPL 3009/041 Approved

FEATURES

• Higher CV capability than PME capacitors resulting in reduced weight of components and reduction in PCB space required.
• Use of Flexiterm® technology for enhanced mechanical stress resistance.
• Capacitance values up to 8.2uF available. 3009041 Detailed Spec 3009041 HOW TO ORDER DIMENSIONS Component Variant 02 (0603) 03 (0805) 04 (1206) 05 (1210) 06 (1812) 225 Capacitance Code 2 significant digits + number of zeros e.g. 103 = 10nF 225 = 2.2μF J Capacitance Tolerance J = 5% K = 10% M = 20% E Voltage X = 16V A = 25V C = 50V E = 100V Size 0603 0805 1206 1210 1812 W L T t 2 ■ JULY 2015 mm (inches) Please note all parts are terminated with a minimum 10% Pb plating. All parts packed in waffles. Lot Validation Testing (LVT) can be ordered separately, LVT Groups 3, 2b, 2a, 1.

JULY 2015 ■ 3 Space Level BME X7R MLCC ESCC QPL 3009/041 Approved PREFERRED SIZES ARE SHADED Case Size 0603 0805 1206 1210 1812 Code Value 16V 25V 50V 100V 16V 25V 50V 100V 16V 25V 50V 100V 16V 25V 50V 100V 16V 25V 50V 100V 222 2.2 (nF) 272 2.7 332 3.3 392 3.9 472 4.7 562 5.6 682 6.8 822 8.2 103 10 123 12 153 15 183 18 223 22 273 27 333 33 393 39 473 47 563 56 683 68 823 82 104 100 124 120 154 150 184 180 224 220 274 270 334 330 394 390 474 470 564 560 684 680 824 820 105 1 (μF) 125 1.2 155 1.5 185 1.8 225 2.2 275 2.7 335 3.3 395 3.9 475 4.7 565 5.6 685 6.8 825 8.2 106 10

ESCC QPL 3009/041 Approved Charateristics Symbol Test Method Tolerance Limits Unitand Conditions (± %) Min. Max. Capacitance 5 0.95C n 1.05Cn (Note 1) C A ESCC No. 3009 10 0.9C n 1.1Cn pF 20 0.8C n 1.2Cn ESCC No. 3009 Tangent of Loss Angle tg δ For UR = 50V, 100V: All – 250 x 10 -4 – For UR = 16V, 25V: – 300 x 10 -4 – ESCC No. 3009 Insulation Resistance R I For Cn ≤ 10000pF: All 100 – GΩ For Cn > 10000pF: 1000 – GΩ nF Voltage Proof VP ESCC No. 3009 All 2.5U R –V NOTE: 1. 300 max for 16 volt and 25 volt rated components NOTE: 1. Single Sample, Inspection Level S3, AQL = 2.5% 2. If 1 failure out of 5 parts, then test 100%. 1.0% rejects maximum allowed in case of 100% testing. 3. X7R dielectric: Delta C/C at U R is typically -10% to -70% dependant on capacitance value. (See curves on next page) ELECTRICAL MEASUREMENTS AT ROOM TEMPERATURE The measurements shall be performed at Tamb = +22 ±3°C. ELECTRICAL MEASUREMENTS AT HIGH AND LOW TEMPERATURE 4 ■ JULY 2015 Charateristics Symbol Test Method and Conditions Limits Unit(Note 1) Min. Max. ESCC No. 3009 Insulation Resistance R I For Cn ≤ 10000pF: 10 – GΩ For Cn > 10000pF: 100 GΩ nF ESCC No. 3009 Temperature TC Tamb = -55 ±2°C, +20 ±2°C, +125 ±2°C %Characteristic (Note 2 and 3) For VT = no voltage applied: -15 +15 LVT 3009041 TEST DETAIL L V T Group LVT 3009041 Test Detail, Parametric Data Recorded Min No. Of Test Number Pcs for Test

3 Solderability 3

2b PCB Mounting, Capacitance Temperature Characteristics 3and Robustness of Termination 2a PCB Mounting, Life testing for 1000 hours, 2 x RV @ 125ºC 10 PCB Mounting, Rapid Change of Temperature , 1 Steady state humidity testing, (1.5 Volts DC @ 85ºC / 85% Hum) 20 1000 hours, external visual inspection

JULY 2015 ■ 5 Space Level BME X7R MLCC ESCC QPL 3009/041 Approved TYPICAL ELECTRICAL CHARACTERISTICS FOR ESCC BME SURFACE MOUNT CAPACITANCE TEMPERATURE CHARACTERISTICS FOR 0805 STYLE (WITH DC BIAS) -10 -20 -30 -40 -50 -60 -70 -80 0 10 20 30 40 50 Typical Cap. Change vs DC Bias for 0805 style DC Bias (Vdc) Cap. Change (%) 08055C 223 08055C 104 08051C 222 08055C 474 IMPEDANCE WITH ESR CHARACTERISTICS FOR 0805 CAPACITANCE RANGE 1 10 100 1000 Z & ESR Curves 100 0.1 0.01 0.001 Freq (MHz) (0hms) 08051C 222 Imp 08051C 222 ESR 08051C 223 Imp 08051C 223 ESR 08055C 104 Imp 08055C 104 ESR 08055C 474 Imp 08055C 474 ESR If required AVX will produce a data sheet for each part number with the following information: a) Impedance/ESR Frequency Sweep b) Capacitance Change with Temperature form -55ºC to +125ºC c) Capacitance Change with DC Voltage up to the rated voltage of the component d) Temperature Change with AC Current applied for higher capacitance values.