ES2J

ES2J UTC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

UNISONIC TECHNOLOGIES CO., LTD ES2J DIODE www.unisonic.com.tw 1 of 4 Copyright © 2014 Unisonic Technologies Co., Ltd QW-R601-268.A SURFACE MOUNT SUPER FAST RECTIFIER „ DESCRIPTION The UTC ES2J is a surface mount super fa st rectifier, it uses UTC’s advanced technology to provide customers with high forward surge current and low reverse leakage, etc. The UTC ES2J is suitable for surface mounted applications. „ FEATURES * Low reverse leakage * High forward surge current capability „ SYMBOL SMB (JEDEC DO-214AA) „ ORDERING INFORMATION Ordering Number Package Pin Assignment Packing Lead Free Halogen Free 1 2 ES2JL-SMB-R ES2JG-SMB-R SMB K A Tape Reel Note: Pin Assignment: A: Anode K: Cathode „ MARKING Date Code Cathode Band for uni-directional Only UTC ES2J L: Lead Free G: Halogen Free

UNISONIC TECHNOLOGIES CO., LTD 2 of 4 www.unisonic.com.tw Q W - R 6 0 1 - 2 6 8 . A „ ABSOLUTE MAXIMUM RATINGS Ratings at 25°C ambient temperature unless otherwise specified. Single phase half-wave 60Hz, resistive or inductive load, for capacitive load current derate by 20%. PARAMETER SYMBOL RATINGS UNIT Working Peak Reverse Voltage V RWM 600 V Repetitive Peak Reverse Voltage V RRM 600 V Maximum RMS Reverse Voltage V RMS 420 V DC Blocking Voltage V R 600 V Average Rectified Output Current (TA=55°C) I O 2.0 A Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load IFSM 50 A Junction Temperature T J -55~+150 °C Storage Temperature T STG -55~+150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. „ THERMAL DATA PARAMETER SYMBOL RATINGS UNIT Junction to Ambient (Note 3) θJA 40 °C/W „ ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Single phase half-wave 60Hz, resistive or inductive load, for capacitive load current derate by 20%. PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT Instantaneous Forward Voltage V FM I F=2.0A 1.7 V DC Reverse Current at Rated DC Blocking Voltage IRM TA=25°C 5 μA TA=100°C 50 μA Reverse Recovery Time (Note 1) t rr 35 ns Junction Capacitance (Note 2) C J 60 pF 2. Measured at 1MHz and applied reverse voltage of 4.0V D.C.

UNISONIC TECHNOLOGIES CO., LTD 3 of 4 www.unisonic.com.tw Q W - R 6 0 1 - 2 6 8 . A „ TYPICAL CHARACTERISTICS Forward Current Derating Curve 1.6 1.2 0.8 0 25 50 75 100 125 150 175 Single Phase Half Wave 60Hz Resistive or inductive Load Ambient Temperature (°C) Average Forward Rectified Current (A) Maximum Non-Repetitive Peak Forward Surge CurrentPeak Forward Surge Current (A) 01 10 100 Number of Cycles aT 60Hz 8.3ms Single Half Sine-Wave (JEDEC Method) 0.4 Typical Instantaneous Forward Characteristics Instantaneous Forward Current (A) 0.1 0.01 Instantaneous Forward Voltage (V) TJ=25°C Pulse Width=300s 1% Duty Cycle Typical Reverse Characteristics Nstantaneous Reverse Current (μA) 1,000 100 0.1 0.0102 0 4 0 6 0 8 0 1 0 0 Percent of Peak Reverse Voltage (%) TJ=25°C TJ=100°C Typical Junction Capacitance Junction Capacitance, (pF) 200 100 0.1 1.0 10 100 Reverse Voltage (V) TJ=25°C Typical Transient Thermal Impedance Transient Thermal Impedance (°C/W ) 100 0.1 0.01 0.1 1 10 100 t, Pulse Duration (sec.)

UNISONIC TECHNOLOGIES CO., LTD 4 of 4 www.unisonic.com.tw Q W - R 6 0 1 - 2 6 8 . A UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.