ES2A DAESAN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
- For surface applications in order optimize board space
- Low profile package
- Built-in strain relief, ideal for automated placement
- Super fast recovery time
- Plastic package has Unerwrites Laboratory Flammability Classification 94V-0
- Ideally suited for use in very high frequency switching power supplies, inverters and as free wheeling diodes
- Low forward voltage drop
- Glass passivated chip junction
- High temperature soldering guaranteed : 250¡É/10 seconds, at terminals Maximum Ratings And Electrical Characteristics
- Case : JEDEC SMB(DO-214AA) molded plastic body
- Terminals : Plated axial lead solderable per MIL-STD-750, method 2026
- Polarity : Color band denotes cathode end
- Mounting Position : Any
- Weight : 0.003 ounce, 0.093 gram (Ratings at 25¡É ambient temperature unless otherwise specified, Single phase, half wave 60Hz, resistive or inductive load. For capacitive load, derate by 20%) CURRENT 2.0 Amperes VOLTAGE 50 to 400 Volts Notes: (1) Test conditions: IF=0.5A, IR=1.0A, Irr=0.25A. (2) Measured at 1MHz and applied reverse voltage of 4.0 Volts. Maximum recurrent peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Volts Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) VDC Maximum average forward rectified current at TL=120¡É Maximum instantaneous forward voltage at 2.0A VRRM Volts Symbols Units 0.95VF VRMS 2.0 Amps Amps 50.0IFSM TJ TSTG 350 -55 to +150 ¡É Volts Maximum reverse current at rated voltage Typical thermal resistance (Note 3) Operating junction and storage temperature range ES2A 5.0 20.0 Volts ¥ìA ¡É/W I(AV) IR R¥èJL TA=25¡É TA=125¡É 100 ES2B 100 150 ES2C 105 150 200 ES2D 140 200 400 ES2G 280 400 600 ES2J 420 600 Typical junction capacitance (Note 2) pF18.0CJ 75.0R¥èJA Maximum reverse recovery time (Note 1) ¥ìS35Trr 1.25 15.0 200 Dimensions in inches and (millimeters) 0.083(2.11) 0.075(1.91) 0.155(3.94) 0.130(3.30) 0.012(0.31) 0.006(0.15) 0.185(4.70) 0.160(4.06) 0.096(2.44) 0.083(2.13) 0.050(1.27) 0.030(0.76) 0.008(0.203) MAX. 0.220(5.59) 0.200(5.08) DO-214AA (SMB)
FIG.1-FORWARD CURRENT DERATING CURVE LEAD TEMPERATURE (¡É) 80 15014013012011010090 RESISTIVE OR INDUCTIVE LOAD COPPER PAD AREAS 1.6 1.2 0.8 0.4 2.4 2.0 AVERAGE FORWARD CURRENT AMPERES FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT(AMPERES) 0.1 0.01 INSTANTANEOUS FORWARD VOLTAGE (VOLTS) TJ=25¡É PULSE WIDTH=300mS 1% DUTY CYCLE FIG.5-TYPICAL JUNCTION CAPACITANCE REVERSE VOLTAGE. VOLTS JUNCTIOIN CAPACITANCE(pF) 10.1 10010 TJ=25¡É f=1.0MHz Vsig=50mVp-P FIG.6-TYPICAL TRANSIENT THERMAL IMPEDANCE T, PULSE DURATION ,sec. 0.1 100101 100 MOUNTED ON 0.2X0.2"(5X7mm) COPPER PAD AREAS TRANSIENT THERMAL IMPEDANCE, ¡É/W FIG.4-TYPICAL REVERSE CHARACTERISTICS PERCENT OF RATED PEAK REVERSE VOLTAGE (%) INSTANTANEOUS REVERSE CURRENT ,(mA) 0 10080604020 1000 0.1 0.01 100 TJ=25¡É TJ=75¡É TJ=125¡É FIG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT NUMBER OF CYCLES AT 60Hz PEAK FORWARD SURGE CURRENT(AMPERES) 1 10010 8.3ms SINGLE HALF SINE WAVE (JEDEC Method) at TL=110¡É RATINGS AND CHARACTERISTIC CURVES ES2A THRU ES2J