ES2AF JUXING | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Reverse Voltage – 50 to 600 V Forward Current –2 A PINNING PIN

DESCRIPTION

Marking Code: ES2AF~ES2JF: ES2A~ES2J Simplified outline SMAF and symbol MECHANICAL DATA

  • Terminals: Solderable per MIL-STD-750, Method 2026
  • pprox. Weight: 27mg 0.00086oz Case: SMAF A Ratings at ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. 25 °C Absolute Maximum Ratings and Characteristics 1 2

FEATURES

For surface mounted applications

  • Low profile package
  • Glass Passivated Chip Juntion
  • Superfast reverse recovery time
  • Lead free in comply with EU RoHS 2011/65/EU directives ES2AF THRU ES2JF Surface Mount Superfast Rectifiers Maximum DC Blocking Voltage Peak Forward Surge Current 8.3 ms Single Half Sine Wave Superimposed on Rated Load Maximum Forward Voltage at 2 A Parameter Maximum Repetitive Peak Reverse Voltage Maximum RMS voltage Operating and Storage Temperature Range Maximum Average Forward Rectified Current at T = 125 °Cc Typical Junction Capacitance at V =4V, f=1MHzR VRRM VRMS VDC IF(AV) IFSM VF IR Cj T , Tj stg 50 100 150 200 300 400 600 V 35 70 105 140 210 280 420 V V 1.0 100 -55 ~ +150 A A V μA ns Symbols Maximum Reverse Recovery Time trr pF Units 50 100 150 200 300 400 600 1.25 1.65 Typical Thermal Resistance RθJA RθJC 20 °C/W （1） （2） Maximum DC Reverse Current T = 25 °Ca at Rated DC Blocking Voltage T =125 °Ca ES2AF ES2BF ES2CF ES2DF ES2EF ES2GF ES2JF （2） （1）Measured with I = 0.5 A, I = 1 A, I = 0.25 AF R rr http://www.trr-jx.comversion: 02

D.U.T 10 ohm Noninductive NonInductive 1 ohm OSCILLOSCOPE Note 1 PULSE GENERATOR Note 2 Note：1.Rise Time = 7ns, max. Input Impedance = 1megohm,22pF. 2. Ries Time =10ns, max. Source Impedance = 50 ohms. Fig.1 Reverse Recovery Time Characteristic And Test Circuit Diagram Fig.4 Typical CharacteristicsForward Fig.5 Typical Junction Capacitance 0.4 0.8 1.2 1.6 2.0 2.4 0.0 25 50 75 100 125 150 175 Average Forward Current (A) Lead Temperature (°C) Fig.2 Maximum Average Forward Current Rating Single phase half wave resistive or inductive P.C.B mounted on 0.315×0.315"(8.0 ) pad areas ×8.0mm Fig.3 Typical Reverse Characteristics I - Current ( A)R Reverse μ 20 100600 0.1 1.0 % of PIV.VOLTS 100 40 80 300 T =25J °C T =75J °C T =125J °C -0.25 -1.0 +0.5 trr 10ns/div Set time Base for 10ns/div Characteristic Curves A =25 ℃ unless otherwise noted) ES2AF THRU ES2JF Surface Mount Superfast Rectifiers 10 100 Peak A)Forward Surage Current ( Number of Cycles 8.3 ms Single Half Sine Wave (JEDEC Method) 2.0 2.51.50 0.01 0.1 1.0 0.5 1.0 0.001 Instaneous Forward Current (A) Instaneous Forward Voltage (V) T =25J °C ES2JF ES2EF/ ES2GF ES2AF~ES2DF http://www.trr-jx.comversion: 02

Plastic surface mounted package; 2 leads SMAF ES2AF ES2BF ES2CF ES2DF ES2EF ES2GF ES2JF The recommended mounting pad size Unit：mm(mil) 2.8(110)1.6(63) 1.8(71) 1.6(63) A C ∠ALL ROUND V AM e UNIT mm max min mil max min 35.4 9.1 7.1 146 130 106 193 173 A C D E HE ∠ 1.6 1.3 e Bottom View HE g Top View 1.3 1.0 g g ∠ALL ROUND E D A E pad pad ES2AF THRU ES2JF Surface Mount Superfast Rectifiers http://www.trr-jx.comversion: 02