ES2ABG CHENDA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 For surface mounted applications Low reverse leakage B uilt-in strain relief,ideal for automated placement High forward surge current capability High temperature soldering guaranteed: 250°C/10 seconds at terminals Glass passivated chip junction Case : JEDEC DO-214AA/SMB Molded plastic body Terminals : Solder plated, solderable per MIL-STD-750,Method 2026 Polarity : Polarity symbol marking on body Mounting Position : Any Weight : 0.003 ounce, 0.095 grams Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. Maximum Ratings And Electrical Characteristics Parameter SYMBOLS ES2ABG ES2BBG ES2CBG ES 2DBG ES2EBG ES2GBG ES2JBG UNITSMarking Code MDD ES2AB MDD ES2BB MDD ES2CB MDD ES2DB MDD ES2EB MDD ES2GB MDD ES2JB Maximum repetitive peak reverse voltage VRMM 50 100 150 200 300 400 600 V Maximum RMS voltage VRMS 35 70 105 140 210 280 420 V Maximum DC blocking voltage VDC 50 100 150 200 300 400 600 V Maximum average forward rectified current at TL=55℃ I(AV) 2.0 A Peak forward surge current 8.3ms single half sine-wave superimposed onrated load (JEDEC Method) IFSM 60 A Maximum inst antaneous f orward voltage at 2.0A VF 1 1.25 1.68 V TA=25℃Maximum DC reverse current at rated DCblocking voltage TA=125℃ IR 5.0 100.0 μA Maximum reverse recovery time (NOTE 1) trr 35 ns Typical junction capacitance (NOTE 2) CJ 40.0 pF Typical thermal resistance (NOTE 3) RJA 60.0 ℃/W Operating junction and storage temperature range TJ,TSTG - 5 5t o+ 1 5 0 ℃ Note:1.Reverse recovery condition IF=0.5A,IR=1.0A,Irr=0.25A 3.Measured at 1MHz and applied reverse voltage of 4.0V D.C. 4.The typical data above is for referenceonly. Dimensions in inches and (millimeters) DO-214AA/SMB 0.060(1.52) 0.030(0.76) 0.220(5.59) 0.200(5.08) 0.012(0.305) 0.006(0.152) 0.008(0.203)MAX. 0.096(2.44) 0.084(2.13) 0.086 (2.20) 0.071 (1.80) 0.185(4.70) 0.160(4.06) 0.155(3.94) 0.130(3.30)
Rev:2019A0 Page :2 Ratings And Characteristic Curves https://www.microdiode.com Reverse Voltage - 50 to 600 Volts Forward Current - 2.0 Ampere The curve above is for reference only. ES2ABG THRU ES2JBG 10 100 Fig.6 Maximum Non-Repetitive Peak Forward Surge Current Peak Forward Surge Current (A) Number of Cycles Fig.3 Typical Reverse Characteristics IR- Reverse Current ( μA) 20 100600 0.1 1.0 100 40 80 300 TJ=25°C TJ=75°C TJ=125°C Fig.4 Typical Forward Characteristics 2.0 2.51.50 0.01 0.1 1.0 0.5 1.0 0.001 Instaneous Forward Current (A) Instaneous Forward Voltage (V) TJ=25°C ES2JB ES2EB/ES2GB ES2AB~ES2DB Noninductive 25Vdc approx D.U.T 10 ohm Noninductive NonInductive 1 ohm OSCILLOSCOPE Note 1 PULSE GENERATOR Note 2 Note：1 .Rise Time = 7ns, max. Input Impedance = 1megohm,22pF. 2. Ries Time =10ns, max. Sou r ce Impedance = 50 ohms. -0.25 -1.0 +0.5 50 ohm trr 10ns/div Set time Base for 10ns/div 0.5 1.0 1.5 2.0 2.5 3.0 0.0 25 50 75 100 125 150 175 Average Forward Current (A) Case Temperature (°C) Fig.2 Maximum Average Forward Current Rating Junction Capacitance (pF) 1.0 10 1000.1 100 Reverse Voltage (V) TJ=25°C % of PIV.VOLTS Fig.5 Typical Junction Capacitance TJ=25°C f = 1.0MHz Vsig = 50mV p-p 3.5 Single phase half-wave 60 Hz resistive or inductive load 8.3 ms Single Half Sine Wave (JEDEC Method)
https://www.microdiode.com Rev:2019A0 Page :3 Important Notice and Disclaimer Microdiode Electronics (Jiangsu) reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design,purchase or use. Microdiode Electronics (Jiangsu) makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, not does Microdiode Electronics (Jiangsu) assume any liability for application assistance or customer product design. Microdiode Electronics (Jiangsu) does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of Microdiode Electronics (Jiangsu). Microdiode Electronics (Jiangsu) products are not authorized for use as critical components in life support devices or systems without express written approval of Microdiode Electronics (Jiangsu). Suggested Pad Layout E B d F W PA D D1D2 C T Note:Devices are packed in accor dance with EIA standar RS-481-A and specifications listed above. Reel packing Reverse Voltage - 50 to 600 Volts Forward Current - 2.0 Ampere Item Symbol Tolerance SMB Carrier width A0 . 1 3 . 8 1 Carrier length B 0.1 5.41 Carrier depth C 0.1 2.42 Sprocket hole d 0.05 1 5.0 13" Reel outside diameter D 2.0 330.00 13" Reel inner diameter D1 min 50.00 Feed hole diameter D2 0.5 13.00 Sprocket hole position E0 . 1 1 . 7 5 Punch hole position F 0.1 5.55 Punch hole pitch P 0.1 8.00 Sprocket hole pitch P0 0.1 4.00 Embossment center P1 0.1 2.00 Overall tape thickness T 0.1 0.30 Tape width W 0.3 12.00 Reel width W1 1.0 12.30 unit:mm PACKAGE REEL SIZE REEL (pcs) COMPONENT SPACING (mm) BOX (pcs) INNER BOX (mm) REEL DIA, (mm) CARTON SIZE (mm) CARTON (pcs) APPROX. GROSS WEIGHT (kg) SMB 13" 3,000 4.0 10,000 190*190*41 330 365*365*360 80,000 14.0 Symbol Unit (mm) Unit (inch) A2 .8 0 .110 B 2.4 0.094 C4 .6 0 .181 D2 .2 0 .086 E7 .0 0 .276 ES2ABG THRU ES2JBG