ES2DA MULTICOMP | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
Features
- Super fast switching time for high efficiency
- Low forward voltage drop and high current capability
- Low reverse leakage current
- Plastic material has UL flammability classification 94V-0 Mechanical Data Case : Molded Plastic Polarity : Colour band denotes cathode Weight : 0.003 ounces, 0.053 grams Mounting Position : Any Reverse Voltage : 200 Volts Forward Current : 2 Amperes Maximum Ratings and Electrical Characteristics Rating at 25°C ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% Characteristics Symbol Values Unit Max. Recurrent Peak Reverse Voltage Vrrm 200 VMax. RMS Voltage Vrms 140 Max. DC Blocking Voltage Vdc 200 Max. Average Forward Rectified Current @Ta = 50°C I(AV) 2 APeak Forward Surge Current 8.3ms Single Half Sine-Wave Super Imposed on Rated Load(JEDEC Method) Ifsm 50 Peak Forward Voltage at 2A DC Vf 0.95 V Maximum DC Reverse Current @Tj = 25°C at Rated DC Blocking Voltage @Tj = 100°C Ir 100 μA Maximum Reverse Recovery Time (Note 1) Trr 35 nS Typical Junction Capacitance (Note 2) cj 40 pF Typical Thermal Resistance (Note 3) rθja 25 °C/W Operating Temperature Range Tj -55 to +150 Storage Temperature Range TsTg -55 to +150 Notes : 1. Measured with If = 0.5A, Ir = 1A, Irr = 0.25A 2. Measured at 1MHz and applied reverse voltage of 4V DC 3. Thermal resistance junction to lead 4. The typical data above is for reference only
Page <2> V1.124/09/19 Surface Mount Super Fast Glass Passivated Rectifer Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Rating and Characteristic Curves
Page <3> V1.124/09/19 Surface Mount Super Fast Glass Passivated Rectifer Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Part Number Table Description Part Number Super Fast Diode 2A, 200V SMA ES2DA+ Dimensions : Inches (Millimetres) Dimensions: Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019.