ES2A ONSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 5
Technical content
Features
- For Surface Mount Applications
- Glass−Passivated Junction
- Low−Profile Package
- Easy Pick and Place
- Built−in Strain Relief
- Superfast Recovery Times for High Efficiency
- These are Pb−Free Devices ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise noted) Symbol Parameter Value Unit VRRM Maximum Repetitive Reverse Voltage ES2A ES2B ES2C ES2D 100 150 200 V IF(AV) Average Rectified Forward Current, 0.375″ Lead Length at T L = 115°C 2.0 A IFSM Non−Repetitive Peak Forward Surge Current, 8.3 ms Single Half−Sine Wave 50 A TSTG Storage Temperature Range −55 to +150 °C TJ Operating Junction Temperature Range −55 to +150 °C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. THERMAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Symbol Parameter Value Unit PD Power Dissipation 1.66 W RθJA Thermal Resistance, Junction to Ambient (Note 1) 75 °C/W RθJL Thermal Resistance, Junction to Lead (Note 1) 20 °C/W 1. Device mounted on FR −4 PCB 0.013 mm. ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Symbol Parameter Test Conditions Value UnitES2A ES2B ES2C ES2D VF Maximum Forward Voltage IF = 2.0 A 0.90 V trr Reverse Recovery Time IF = 0.5 A, IR = 1.0 A, IRR = 0.25 A 20 ns IR Maximum Reverse Current at Rated VR TA = 25/C0095C TA = 100/C0095C 350 /C0109A CT Total Capacitance VR = 4.0 V, f = 1.0 MHz 18 pF Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. SMB CASE 403AF MARKING DIAGRAM ZYWW ES2x Z = Assembly Plant Code Y = Year WW = Work Week ES2x = Specific Device Code x = A, B, C, D (COLOR BAND DENOTES CATHODE) See detailed ordering and shipping information on page 3 of this data sheet.
ORDERING INFORMATION
ES2A−ES2D www.onsemi.com Figure 6. Reverse Recovery Time Characteristic and Test Circuit Diagram
- Rise time = 7.0 ns max; Input impedance = 1.0 M /C0087 22 pF.
- Rise time = 10 ns max; Source impedance = 50 /C0087.
Part Number Device Code Marking Package Type Shipping† ES2A ES2A SMB (Pb−Free) 3000 / Tape & Reel ES2B ES2B SMB (Pb−Free) 3000 / Tape & Reel ES2C ES2C SMB (Pb−Free) 3000 / Tape & Reel ES2D ES2D SMB (Pb−Free) 3000 / Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.
2.20 2.50 4.70
2.65 MAX
2.45 1.90 B 0.203 0.050 0.30 0.05 2.15 1.65 A
0.13 M C B A
C 3.95 3.30 B 2.20 1.91 B 5.60 5.08 B 4.75 4.05
0.13 M C B AB
A 0.41 0.15 1.60 0.75 R0.15 4X 0.45 0 − 8° DETAIL A SCALE 20 : 1 LAND PATTERN RECOMMENDATION GAUGE PLANE NOTES: A. EXCEPT WHERE NOTED CONFORMS TO JEDEC DO214 VARIATION AA. B DOES NOT COMPLY JEDEC STD. VALUE. C. ALL DIMENSIONS ARE IN MILLIMETERS. D. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH AND TIE BAR PROTRUSIONS. E. DIMENSION AND TOLERANCE AS PER ASME Y14.5−1994. F. LAND PATTERN STD. DIOM5336X240M. MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS 98AON13441GDOCUMENT NUMBER: DESCRIPTION: Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1SMB onsemi and are trademarks of Semiconductor Components Industries, LLC dba onsemi or its subsidiaries in the United States and/or other countries. onsemi reserves the right to make changes without further notice to any products herein. onsemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. onsemi does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2019 www.onsemi.com
onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. ADDITIONAL INFORMATION TECHNICAL PUBLICATIONS: Technical Library: www.onsemi.com/design/resources/technical−documentation onsemi Website: www.onsemi.com ONLINE SUPPORT: www.onsemi.com/support For additional information, please contact your local Sales Representative at www.onsemi.com/support/sales