ES2AW_V01 CHENDA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
Ideal for surface mouted applications Low reverse leakage Metallurgically bonded construction High temperature soldering guaranteed: 250°C/10 seconds,0.375”(9.5mm) lead length, 5 lbs. (2.3kg) tension Reverse Voltage - 50 to 600 Volts Forward Current - 2.0 Ampere Mechanical Data Case: JEDEC 6OD-123FL molded plastic body Terminals: Solderable per MIL-STD-750,Method 2026 Polarity: Polarity symbol marking on body Mounting Position: Any Weight : 0.007 ounce, 0.02 grams Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. Maximum Ratings And Electrical Characteristics Parameter SYMBOLS ES2AW ES2BW ES2CW ES2DW ES2EW ES2GW ES2JW UNITS Marking Code MDD 2E1 MDD 2E2 MDD 2E3 MDD 2E4 MDD 2E5 MDD 2E6 MDD 2E8 Maximum repetitive peak reverse voltage V RMM 50 100 150 200 300 400 600 V Maximum RMS voltage V RMS 35 70 105 140 210 280 420 V Maximum DC blocking voltage V DC 50 100 150 200 300 400 600 V Maximum average forward rectified current at Ta=65 I (AV) 2.0 A Peak forward surge current 8.3ms single half sine-wave superimposed onrated load (JEDEC Method) I FSM A Maximum instantaneous forward voltage at 2.0A V F 0.95 1.25 1.7 V Maximum DC reverse current TA=25 at rated DCblocking voltage TA=125℃ I R 100 μA Typical junction capacitance (NOTE 1) C J pF Maximum Reverse Recovery Time (NOTE 2) t rr 35 ns Typical thermal resistance (NOTE 3) R JA W Operating junction temperature range T J - 5 5t o+ 1 2 5 Storage temperature range T STG - 5 5t o+ 1 5 0 Note: The typical data above is for reference only. Dimensions in inches and (millimeters) SOD-123FL 0.154(3.90) 0.141(3.60) 0.035(0.90) 0.028(0.70) 0.008(0.20) 0.005(0.12) 0.043(1.10) 0.035(0.90) 0.114(2.90) 0.102(2.60) 0.031 (0.08) 0.043 (1.10) 0.075(1.90) 0.067(1.70)
Rev:2019A0 Page :2 Typical Characterisitics The curve above is for reference only. https://www.microdiode.com ES2AW THRU ES2JW Reverse Voltage - 50 to 600 Volts Forward Current - 2.0 Ampere Noninductive 25Vdc approx D.U.T Noninductive NonInductive 1 ohm OSCILLOSCOPE Note 1 PULSE GENERATOR Note 2 Note：1 .Rise Time = 7ns, max. Input Impedance = 1megohm,22pF. 2. Ries Time =10ns, max. Source Impedance = 50 ohms. 10 100 Fig.6 Maximum Non-Repetitive Peak Forward Surage Current Peak Forward Surage Current (A) 8.3 ms Single Half Sine Wave (JEDEC Method) -0.25 -1.0 +0.5 10ns/div Set time Base for 10ns/div 0.4 0.8 1.2 1.6 2.0 2.4 0.0 25 50 75 100 125 150 175 Average Forward Current (A) Lead Temperature (°C) Fig.2 Maximum Average Forward Current Rating Fig.3 Typical Reverse Characteristics IR- Reverse Current (μA) 20 100600 0.1 1.0 % of PIV.VOLTS 100 40 80 300 TJ=25°C TJ=75°C TJ=125°C Single phase half wave resistive or inductive P.C.B mounted on Fig.4 Typical Forward Characteristics 2.0 2.51.50 0.01 0.1 1.0 0.5 1.0 0.001 Instaneous Forward Current (A) Instaneous Forward Voltage (V) TJ=25°C ES2JW ES2EW/WS2GW ES2AW~ES2DW Fig.5 Typical Junction Capacitance Junction Capacitance (pF) Reverse Voltage (V) 1 1000.1 TJ=25°C f = 1.0MHz Vsig = 50mV p-p Number of Cycles
https://www.microdiode.com Rev:2019A0 Page :3 Important Notice and Disclaimer Microdiode Electronics (Jiangsu) reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design,purchase or use. Microdiode Electronics (Jiangsu) makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, not does Microdiode Electronics (Jiangsu) assume any liability for application assistance or customer product design. Microdiode Electronics (Jiangsu) does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of Microdiode Electronics (Jiangsu). Microdiode Electronics (Jiangsu) products are not authorized for use as critical components in life support devices or systems without express written approval of Microdiode Electronics (Jiangsu). Suggested Pad Layout 0.079 0.173 Symbol Unit (mm) A C D 0.047 4.4 E B Unit (inch) 0.126 1.2 0.0471.2 E B d F W PA D D1D2 C T Item Tolerance SOD-123FL Carrier width Carrier length Carrier depth Sprocket hole 7" Reel outside diameter 7" Reel inner diameter Feed hole diameter Sprocket hole position Punch hole position Punch hole pitch Sprocket hole pitch Embossment center Overall tape thickness Tape width P E B C d F T W P A D D Reel width W1 Symbol 0.1 0.1 0.1 min 0.5 0.1 0.3 1.0 0.1 0.05 0.1 0.1 0.1 0.1 2.0 unit:mm 1.55 178.00 50.0 13.00 1.75 3.50 4.00 4.00 2.00 0.25 8.15 10.5 Note:Devices are packed in accor dance with EIA standar RS-481-A and specifications listed above. 2.1 4.0 1.60 Reel packing SOD-123FL 7" 3,000 4.0 45,000 210*208*203 178 430*430*235 180,000 9.0 PACKAGE REEL SIZE REEL COMPONENT SPACING BOX INNER BOX REEL DIA, CARTON SIZE CARTON APPROX. GROSS WEIGHT (kg)(pcs)(m/m)(m/m)(m/m)(pcs)(m/m)(pcs) 3.2 ES2AW THRU ES2JW Reverse Voltage - 50 to 600 Volts Forward Current - 2.0 Ampere