ES1J MULTICOMP | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
Features
- Glass passivated junction chip
- For surface mounted application
- Low profile package
- Built-in strain relief
- Ideal for automated placement
- Easy pick and place
- Super fast recovery time for high efficiency
- Glass passivated chip junction
- High temperature soldering : 260°C / 10 seconds at terminals
- Plastic material Mechanical Data Case : Moulded plastic Terminals : Pure tin plated, lead free Polarity : Indicated by cathode band Standard Packaging : 12mm tape (EIA STD RS-481) Weight : 0.064 g Maximum Ratings and Electrical Characteristics Rating at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20% Characteristics Symbol ES1A+ ES1G+ ES1J+ Unit Max. Recurrent Peak Reverse Voltage Vrrm 50 400 600 VMax. RMS Voltage Vrms 35 280 420 Max. DC Blocking Voltage Vdc 50 400 600 Max. Average Forward Rectified Current I(AV) 1 APeak Forward Surge Current, 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) Ifsm 30 Max. Instantaneous Forward Voltage at 1 A Vf 0.95 1.3 1.7 V Maximum DC Reverse Current @Ta = 25°C at Rated DC Blocking Voltage @Ta = 100°C Ir 100 μA Maximum Reverse Recovery Time (Note 1) Trr 35 nS Typical Junction Capacitance (Note 2) cj 10 8 pF Typical Thermal Resistance (Note 3) rθja rθjl 35 °C/W Operating Temperature Range Tj -55 to +150 °C Storage Temperature Range TsTg Notes : 1. Measured with If = 0.5A, Ir = 1A, Irr = 0.25A 2. Measured at 1MHz and applied Vr = 4V 3. PCB mounted on 0.2 × 0.2 inches (5 × 5 mm) copper pad area
Page <2> V1.011/09/19 Fast / Ultrafast Diode Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Ratings and Characteristic Curves
Page <3> V1.011/09/19 Fast / Ultrafast Diode Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Part Number Table Description Part Number Diode, Ultra-Fast, 1A, 50V ES1A+ Diode, Ultra-Fast, 1A, 400V ES1G+ Diode, Ultra-Fast, 1A, 600V ES1J+ Reverse Recovery Time Characteristic and Test Circuit Diagram Dimensions : Inches (Millimetres) Dimensions: Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019.