ES1X MULTICOMP | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

Page <1> 10/05/12 V1.1 www.element14.com www.farnell.com www.newark.com Features:

  • Glass passivated junction chip
  • For surface mounted application
  • Low profile package
  • Built-in strain relief
  • Ideal for automated placement
  • Easy pick and place
  • Super fast recovery time for high efficiency
  • Glass passivated chip junction
  • High temperature soldering : 260°C / 10 seconds at terminals
  • Plastic material SMA/DO-214AC Dimensions : Inches (Millimetres) Mechanical Data Case : Moulded plastic Terminals : Pure tin plated, lead free Polarity : Indicated by cathode band Standard Packaging : 12 mm tape (EIA STD RS-481) Weight : 0.064 g

Page <2> 10/05/12 V1.1 www.element14.com www.farnell.com www.newark.com Notes : 1. Reverse recovery test conditions : I F = 0.5 A, IR = 1 A, I RR = 0.25 A 2. Measured at 1 MHz and applied V R = 4 V 3. PCB mounted on 0.2 × 0.2 inches (5 × 5 mm) copper pad area Maximum Ratings and Electrical Characteristics Rating at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Ratings and Characteristic Curves (ES1A, ES1F, ES1G, ES1H and ES1J) Maximum Forward Current Derating Curve Average Forward Current (A) Lead Temperature (°C) Type Number Symbol ES1A ES1F ES1G ES1H ES1J Units Maximum Recurrent Peak Reverse Voltage VRRM 50 300 400 500 600 VMaximum RMS Voltage VRMS 35 210 280 350 420 Maximum DC Blocking Voltage VDC 50 300 400 500 600 Maximum Average Forward Rectified Current I(AV) 1 APeak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) IFSM 30 Maximum Instantaneous Forward Voltage at 1 A VF 0.95 1.3 1.7 V Maximum DC Reverse Current at TA = 25°C at Rated DC Blocking Voltage at TA = 100°C IR 100 µA Maximum Reverse Recovery Time (Note 1) Trr 35 nS Typical Junction Capacitance ( Note 2 ) Cj 10 8 pF Maximum Thermal Resistance (Note 3) RθJA RθJL 35 °C / W Operating Temperature Range TJ -55 to 150 °C Storage Temperature Range TSTG Peak Forward Surge Current (A) Maximum Non-Repetitive Peak Forward Surge Current Number of Cycles at 60 Hz

Page <3> 10/05/12 V1.1 www.element14.com www.farnell.com www.newark.com Ratings and Characteristic Curves Percent Rated Peak Reverse Voltage (%) Instantaneous Reverse Current (µA) Typical Reverse Characteristics Typical Junction Capacitance Reverse Voltage (V) Junction Capacitance (pF) Forward Voltage (V) Typical Instantaneous Forward Characteristics Instantaneous Forward Current (A)

Page <4> 10/05/12 V1.1 www.element14.com www.farnell.com www.newark.com Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012. Reverse Recovery Time Characteristic and Test Circuit Diagram Notes : 1. Rise Time = 7 ns Maximum. Input Impedance =

1 MΩ 22 pf

  1. Rise Time = 10 ns Maximum Source Impedance = 50 Ω Part Number Table Description Part Number Diode, Ultra-Fast, 1 A, 50 V ES1A Diode, Ultra-Fast, 1 A, 300 V ES1F Diode, Ultra-Fast, 1 A, 400 V ES1G Diode, Ultra-Fast, 1A, 500 V ES1H Diode, Ultra-Fast, 1 A, 600 V ES1J