ES1C MULTICOMP | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
Page <1> 23/05/12 V1.1 www.element14.com www.farnell.com www.newark.com Features:
- Glass passivated junction chip
- For surface mounted application
- Low profile package
- Built-in strain relief
- Ideal for automated placement
- Easy pick and place
- Superfast recovery time for high efficiency
- High temperature soldering : 250°C / 10 seconds at terminals SMA / DO-214AC Dimensions : Millimetres Length Width Depth X Y Z Dimensions Foot Print Dimensions : Millimetres Mechanical Data: Cases : Moulded plastic Terminals : Solder plated Polarity : Indicated by cathode band
Page <2> 23/05/12 V1.1 www.element14.com www.farnell.com www.newark.com Maximum Ratings and Electrical Characteristics Rating at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number ES1B ES1C ES1D Unit Maximum Recurrent Peak Reverse Voltage 100 150 200 VMaximum RMS Voltage 70 105 140 Maximum DC Blocking Voltage 100 150 200 Maximum Average Forward Rectified Current (See Figure 1) 1 APeak Forward Surge Current, 8.3 ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) Maximum Instantaneous Forward Voltage at 1 A 0.95 V Maximum DC Reverse Current at TA = 25°C at Rated DC Blocking Voltage at TA = 100°C 100 µA Maximum Reverse Recovery Time (Note 1) 35 nS Typical Junction Capacitance (Note 2) 10 pF Typical Thermal Resistance (Note 3) RθJL RθJA 35 °C / W Operating Temperature Range TJ -55 to +150 °C Storage Temperature Range TSTG Notes: 1. Reverse recovery test conditions: I F = 0.5 A, IR = 1 A, IRR = 0.25 A 2. Measured at 1 MHz and applied V R = 4 V 3. PCB mounted on 0.2 × 0.2 inches (5 × 5 mm) copper pad area Ratings and Characteristic Curves Figure 1 Maximum Forward Current Derating Curve Figure 2 Maximum Non-Repetitive Forward Surge Current Average Forward Current (A) Lead Temperature (°C) Peak Forward Surge Current (A) Number of Cycles at AT 60 Hz
Page <3> 23/05/12 V1.1 www.element14.com www.farnell.com www.newark.com Figure 3 Typical Forward Characteristics Figure 4 Typical Reverse Characteristics Figure 5 Typical Junction Capacitance Specification Table IF (AV) (A) VRRM (V) IFSM (A) trr maximum (nS) VF (V) at IF = 1 A Package Part Number 100 30 35 0.95 DO -214 AC (SMA) ES1B
150 ES1C
200 ES1D
Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2011. Instantaneous Forward Current (A) Forward Voltage (V) Instantaneous Reverse Current (µµΑΑ)) Percent of Rated Peak Reverse Voltage (%) Reverse Voltage (V) Junction Capacitance (PF )