ES1A BILIN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
www.galaxycn.com BLGALAXY ELECTRICAL BL Document Number 0280026 1.
FEATURES
Case:JEDEC DO-214AC,molded plastic Terminals: Solderable per MIL- STD-202,Method 208 Polarity: Color band denotes cathode Weight: 0.002 ounces,0.064 grams Mounting position: Any Ratings at 25 ambient temperature unless otherwise specified. Single phase,half wave,60 Hz,resistive or inductive load. For capacitive load,derate by 20%. ES1C ES1D ES1G EC ED EG Maximum recurrent peak reverse voltage VRRM 150 200 400 V Maximum RMS voltage VRMS 105 140 210 V Maximum DC blocking voltage VDC 150 200 400 V Maximum average forward rectified current @T A=75 Peak forward surge current 8.3ms single half-sine-wave superimposed on rated load @T J=125 Maximum instantaneous forward voltage at1.0 A VF V Maximum rev erse current @TA=25 at rated DC blocking v oltage @TA=125 Typical reverse recovery time (Note1) trr ns Typical junction capacitance (Note2) CJ pF Typical thermal resistance (Note3) RθJA Operating junction temperature range TJ Storage temperature range TSTG 0.98 1.25 DO-214AC(SMA) Device marking code EA EB UNITS - 55 ---- + 150 ES1A ES1B 50 100 A 30IFSM IR NOTE: 1. Measured with IF=0.5A, IR=1A, Irr=0.25A. A ES1A--- ES1G A 5.0 Easily cleaned with Alcohol,Isopropanol and similar solvents IF(AV) 1.0 SURFACE MOUNT RECTIFIERS The plastic material carries U/L recognition 94V-0 10050 GALAXY ELECTRICAL 2. Measured at 1.0MHZ and applied reverse voltage of 4.0V DC. 25 35 100 VOLTAGE RANGE: 50 --- 400 V CURRENT: 1.0 A - 55 ---- + 150 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS inch(mm)
TJ=25 100 200 0.1 0.2 0.4 1 2 4 10 40 100 20 www.galaxycn.com Document Number 0280026 2.BLGALAXY ELECTRICAL AMPERES AMPERES AMPERES JUNCTION CAPACITANCE,pF NOTES:1.RISE TIME = 7ns MAX.INPUT IMPEDANCE = 1M .22pF. JJJJJ2.RISE TIME =10ns MAX.SOURCE IMPEDANCE=50 RATINGS AND CHARACTERISTIC CURVES INSTANTANEOUS FORWARD VOLTAGE, VOLTS INSTANTANEOUS FORWARD CURRENT ES1A --- ES1G FIG.1 -- TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC AVERAGE FORWARD CURRENT SET TIME BASE FOR 10/15 ns/cm FIG.2 -- TYPICAL FORWARD CHARACTERISTIC FIG.3 -- FORWARD DERATING CURVE z FIG.4 -- TYPICAL JUNCTION CAPACITANCE FIG.5 -- PEAK FORWARD SURGE CURRENT AMBIENT TEMPERATURE, PEAK FORWARD SURGE CURRENT NUMBER OF CYCLES AT 60Hz REVERSE VOLTAGE,VOLTS PULSE GENERATOR (NOTE2) D.U.T. NONIN- DUCTIVE N 1. N1 . OSCILLOSCOPE (NOTE 1) (+) 25VDC (approx) (-) -1.0A -0.25A +0.5A trr 1cm 01 . 0 1 . 8 Pulse width=300 s 1% Duty Cycle TJ=25 0.4 0.8 100 1.0 0.1 0.01 11 0 1 00 8.3ms Single Half Sine-Wave 0.5 0 25 50 75 100 125 150 Single Phase Half Wave 60HZ Resistive or Inductive Load 175