ES1AW RECTRON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
SOD123F(L) I t 2.5 A S Typical Current Squarad Time ES1AW THRU ES1J W
FEATURES
- Easy pick and place * Low profile package * For surface mounted applications * Built -in strain relief * Superfast recovery times for high efficiency 200 2020-11/01 REV:C
RATING AND CHARACTERISTICS CURVES (ES1AW THRU ES1J W)
Plastic surface mounted package; 2 leads A A C VAM e UNIT mm max min mil max min 7.9 4.7 114 102 150 138 ACDE HE 1.1 0.8 e Bottom View HE E D E gdap dap Top View 0.9 0.7 g g The recommended mounting pad size 2.0 (79) 1.2 (47) mm (mil)Unit 1.2 (47 ) 2.1 )74( SOD123F(L)
PACKAGING OF DIODE AND BRIDGE RECTIFIERS REEL PACK PACKAGE GROSS WEIGHT(Kg) EA PER REEL COMPONENT SPACE TAPE SPACE (mm) CARTON SIZE (mm) (mm) EA PER CARTON REEL DIA PACKING CODE (mm) EA PER BOX 15,000 INNER
- • Recommended condition of flow soldering 2 to 5 min more than 1 min less than 10s 100°C 120°C 245°C 265°C Temperature of Soldering (°C) Preliminary Heatin g Solderin g Cooling (in air) 100 150 200 250 300
- Recommended condition of reflow soldering Recommended peak temperature is over 245 °C. If peak temperature is below 245 °C, you may adjust the following parameters; time length of peak temperature (long er), time length of soldering (longer), thickness of solder paste (thicker) Temperature: 370°C Time: 3s max. Times: one time
- Condition of hand soldering
- Remark: Lead free solder paste (96.5Sn/3.0Ag/0.5Cu) Temperature of Soldering (°C)Pre Heating Rate 1 to 5°C / s Preliminary Heating 130 to 170°C, 50 to 120s Soldering 230°C 20 to 30s Cooling more than 60s Reflow Heating Rate 1 to 5°C / s Peak Temperature 245 to 260°C, 10s max. 100 150 200 250 300 2 times max.
Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liabi- lity for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" paramet- ers which may be included on RECTRON data sheets and/ or specifications ca- n and do vary in different applications and actual performance may vary over ti- me. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other rela- ted applications where a failure or malfunction of component or circuitry may di- rectly or indirectly cause injury or threaten a life without expressed written appr- oval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rect- ron Inc and its subsidiaries harmless against all claims, damages and expendit- ures. DISCLAIMER NOTICE