ES015-10 POWERBOX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

  • Autoranging input  Small and light  10 turn potentiometer control  Programmable by 0–5V  EMC standard EN61204-3  Short circuit protected  Optional ethernet, RS232 and IEEE488 programming interface. MODEL NUMBER OUTPUT VOLTAGE (0V TO) OUTPUT CURRENT (0A TO) RIPPLE & NOISE CV CC PROGRAM SPEED ES015-10 15V 10A 8mV p-p 10mA p-p 7mS ES030-5 30V 5A 10mV p-p 2mA p-p 15mS ES075-2 75V 2A 15mV p-p 0.5mA p-p 17mS ES0300-0.45 300V 0.45A 50mV p-p 0.2mA p-p 10mS Specifications INPUT Voltage range AC 90–265V, 48Hz–62Hz Inrush current 10A with NTC resistor 30Ω cold resistance. Power factor 0.99 / 0.83 (110 / 230 Vac) Isolation I/P to O/P: 4000Vrms (1 min.), Creepage: 8mm I/P to Case: 2500Vrms, O/P to Case: 600Vdc OUTPUT Power 150 watts Voltage regulation Load 0%–100%: ES015-10: 15mV, ES030-5: 6mV, ES075-2: 5mV, ES0300-0.45: 10mV (Internal Sensing, optional external sensing available on request). Line, 90-265Vac ES015-10: 0.2mV, ES030-5: 0.5mV, ES075-2: 1mV, ES0300-0.45: 3mV Current regulation Load 0%–100%: ES015-10: 3mA, ES030-5: 1mA, ES075-2: 0.5mA, Line, 90-265Vac ES015-10: 0.5mA, ES030-5: 0.2mA, ES075-2: 0.1mA, ES0300-0.45: 0.05mA. Voltage/current adjustment By 10-turn potentiometers, resolution 0.03% Ripple & noise pk-pk See table Overvoltage protection (fixed) ES015-10: 18V, ES030-5: 40V, ES075-2: 90V, ES0300-0.45: 330V. Short circuit protection Yes Overload protection Yes Temperature coefficient CV: 5x 10-5 /°C, CC: 10x 10-5 /°C. ENVIRONMENTAL Operating temperature -20°C to +50°C Storage temperature -40°C to +85°C Humidity max. 95% RH, non condensing, up to 40°C. max. 75% RH, non condensing, up to 50°C. Derating Above 50°C, derate linearly to 20% @ 75°C Cooling Convection Thermal protection Output shuts down in case of insufficient cooling. MTBF 500,000 hours Selection Table

460 LABORATORY

Your dependable power partner – www.powerbox.com.au 461 LABORATORY ES Series

150 WATTS PROGRAMMABLE DC SUPPLY

Screwdriver adjustment - option P001 Master / slave operation Increased max. output voltage / current - option P069 Remote sensing / Rear power outlet - option P119 - 122 Internal ethernet power supply controller - option P150 Internal RS232 power suply controller - option P148 External IEEE488 power supply controller - PSC 488 EXT Technical Illustrations