ERHA501LGC122MC95M CHEMI-CON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. RHASeries ・Realized higher voltage than RWF series (500 to 650Vdc) ・Endurance with ripple current : 5,000 hours at 85℃ ・Suitable for high voltage inverter ・RoHS compliant ◆SPECIFICATIONS Items Characteristics Category Temperature Range -25 to +85℃ Rated Voltage Range 500 to 650Vdc Capacitance Tolerance ±20% (M) (at 20℃, 120Hz) Leakage Current I=0.02CV or 5mA, whichever is smaller. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃ after 5 minutes) Dissipation Factor (tanЎ) 0.25 max. (at 20℃, 120Hz) Low Temperature Characteristics Capacitance change C(-25℃)/C(+20℃)≧0.6 (at 120Hz) Insulation Resistance When measured between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case by using an insulation resistance meter of 500Vdc, the insulation resistance shall not be less than 100MΩ. Insulation Withstanding Voltage When a voltage of 2,000Vac is applied for 1 minute between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case, there shall not be electrical damage. Endurance The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 85℃. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value Shelf Life The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 500 hours at 85℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value ◆DIMENSIONS (Screw-Mount) [mm] φDφD φ50 &φ63.5 : G=6 φ76.2 &φ89 : G=5 φ100 : G=10

  • Mounting Clamp Code : B L+4max. G±1 φD+1.8max. F±1 Sleeve (Pb-free PVC : Black) Plastic disk A±1 W±1 4.5 B±1 30°±5° 45°±5° 360° J K±1 E±1 4.5
  • Mounting Clamp Code : C 63.5 76.2 A 78.0 90.0 104.5 B 64.0 76.0 90.0 W 68.0 80.0 93.5 F 22.4 28.0 31.5 63.5 76.2 100 E 32.5 38.1 44.5 50.8 56.5 K 37.0 43.5 50.0 56.5 63.4 F 22.4 28.0 31.5 31.5 41.5 J 14.0 14.0 14.0 16.0 18.0
  • Terminal Code : LG Vent φ100 Cross-recessed head (phillips) scre w : M8×1.25×16 Spring washer,Washer Maximum screw tightening torque :6.31Nm <Screw specifications> toφ89 Plus hexagon-headed screw :M5×0.8×10 Maximum screw tightening torque :3.23Nm * The screw and the mounting clamp are separately supplied and not attached to the product. ◆PART NUMBERING SYSTEM Supplement code Size code Capacitance tolerance code Capacitance code (ex. 6,800µ F:682, 12,000µ F:123) Mounting clamp code (N, B, C) Terminal code Voltage code (ex. 500V:501, 650V:651) Series code Category E R H A A A A L G N A A A A A A MM 1 3 42 6 7 8 9 10 13125 18171611 1514 Please refer to "Product code guide (screw-mount terminal type)" Higher voltage RHA RWF P302 Inverter-use screw terminal, 85℃ 314 CAT. No. E1001Q LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS

Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. RHASeries ◆STANDARD RATINGS WV (Vdc) Cap (µF) Case size ПDʷL(mm) tanЎ Rated ripple current (Arms/ 85ˆ,120Hz) Part No. WV (Vdc) Cap (µF) Case size ПDʷL(mm) tanЎ Rated ripple current (Arms/ 85ˆ,120Hz) Part No. 500 1,200 50×95 0.25 5.90 ERHA501LGC122MC95M 550 5,600 89×150 0.25 18.2 ERHA551LGC562MFF0M 1,500 50×115 0.25 7.20 ERHA501LGC152MCB5M 6,800 89×170 0.25 21.1 ERHA551LGC682MFH0M 1,800 50×130 0.25 8.30 ERHA501LGC182MCD0M 8,200 100×170 0.25 24.8 ERHA551LGC822MGH0M 2,200 50×150 0.25 9.80 ERHA501LGC222MCF0M 10,000 100×200 0.25 29.4 ERHA551LGC103MGL0M 2,700 63.5×120 0.25 11.2 ERHA501LGC272MDC0M 600 1,200 63.5×95 0.25 6.70 ERHA601LGC122MD95M 12,000 100×210 0.25 32.9 ERHA501LGC123MGM0M 3,900 89×130 0.25 14.2 ERHA601LGC392MFD0M 550 1,000 50×95 0.25 5.40 ERHA551LGC102MC95M 4,700 89×150 0.25 16.6 ERHA601LGC472MFF0M 1,200 50×110 0.25 6.30 ERHA551LGC122MCB0M 5,600 89×170 0.25 19.1 ERHA601LGC562MFH0M 1,500 50×130 0.25 7.60 ERHA551LGC152MCD0M 650 1,000 63.5×100 0.25 6.30 ERHA651LGC102MDA0M 4,700 89×130 0.25 15.6 ERHA551LGC472MFD0M ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency (Hz) 50 120 300 1k 3k Note : The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 to 10 ℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Also, for the RHA series capacitors, using them at operating voltage less than their rated voltage can extend their lifetime. For details, please contact a representative of Nippon Chemi-Con. Inverter-use screw terminal, 85℃ 315 CAT. No. E1001Q LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS