ERA10MEGF GULFSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
FAST SWITCHING PLASTIC RECTIFIER VOLTAGE: 1000V CURRENT: 1.0A FEATURE A-405 High temperature metallurgically bonded construction Sintered glass cavity free junction Capability of meeting environmental standard of MIL-S-19500 High temperature soldering guaranteed 350 °C /10sec/0.375”lead length at 5 lbs tension Operate at Ta =55 °C with no thermal run away Typical Ir<0.2 µA Low power loss, high efficient MECHANICAL DATA Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C Case: Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: color band denotes cathode Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half wave, 60HZ, resistive or inductive load rating at 25 °C, unless otherwise stated) SYMBOL ERA 10M EGF units Maximum Recurrent Peak Reverse Voltage Vrrm 1000 V Maximum RMS Voltage Vrms 700 V Maximum DC blocking Voltage Vdc 1000 V Maximum Average Forward Rectified Current 3/8”lead length at Ta =55 If(av) 1.0 A Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Ifsm 30 A Maximum Forward Voltage at rated Forward Current and 25 Vf 1.7 V Maximum full load reverse current full cycle average at 55 °C Ambient Ir(av) 50 µA Maximum DC Reverse Current Ta =25 °C at rated DC blocking voltage Ta =125 °C Ir 10 µA µA Maximum Reverse Recovery Time (Note 1) Trr 75 nS Typical Junction Capacitance (Note 2) Cj 15 pF Typical Thermal Resistance (Note 3) R(ja) 60 °C Storage and Operating Temperature Range Tstg, Tj -65 to +175 °C Note: 1. Reverse Recovery Condition If = 0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 3. Thermal Resistance from Junction to Ambient at 3/8”lead length, P.C. Board Mounted Rev.A2 www.gulfsemi.com
RATINGS AND CHARACTERISTIC CURVES ERA10MEGF Rev.A2 www.gulfsemi.com