ER3A PANJIT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
PAGE . 1DATE : SEP.25.2002
FEATURES
- For surface mounted applications
- High temperature metallurgically bonded-no compression contacts as found in other diode-constructed rectifiers
- Glass passivated junction
- Built-in strain relief
- Easy pick and place
- Plastic package has Underwriters Laboratory Flammability Classification 94V-O
- Complete device submersible temperature of 260°C for 10 seconds in solder bath MECHANICAL DATA Case: JEDEC DO-214AB molded plastic Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Indicated by cathode band Standard packaging: 12mm tape (EIA-481) Weight: 0.007 ounce, 0.21 gram ER3A~ER3J SURFACE MOUNT RECTIFIER VOLTAGE- 50 to 600 Volts CURRENT - 3.0 Amperes MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TL=75°C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage at 3.0A Maximum DC Reverse Current T A=25°C at Rated DC Blocking Voltage T A=125°C Maximum Reverse Recovery (Note 1) Typical Junction Capacitance (Note 2) Maximum Thermal Resistance(Note 3) R θJA Operating and Storage Temperature Range T J 3.0 100.0 0.95 5.0 35.0 45.0 -55 to +150 V V V A A µA UNITS NOTES:1. Reverse Recovery Test Conditions: I F=0.5A, IR=1.0A, Irr=0.25A 2. Measured at 1 MHz and applied V r = 4.0 volts. 3. 8.0 mm2 ( .013mm thick ) land areas. 200 ns DATA SHEET V SMC / DO-214AB Unit: inch ( mm ) .260 (6.60) .280 (7.11) .006 (.152) .012 (.305) .008(.203) .002(.051) .305 (7.75) .320 (8.13) .030 (0.76) .050 (1.27) pf µA °C/W ER3A ER3B 100 100 ER3C 150 105 150 ER3D 200 140 200 ER3E 300 210 300 ER3G 400 280 400 ER3J 600 420 600 1.25 1.70
PAGE . 2DATE : SEP.25.2002 LEAD TEMPERATURE, C O AVERAGE FOR WARD CURRENT , AMPER S FORWARD CURRENT DERATING CURVE 250 60 70 80 90 100 110 4.0 3.0 2.0 1.0 45 6 100 1.0 0.1 0.01 TYPICAL REVERSE CHARACTERISTICS PERCENT OF RATED PEAK INVERSE VOLTAGE, Volts 2 4 06 08 06 08 0 1 0 0 1 2 0 1 4 0 INSTANTANEOUS REVERSE CURRENT, Ampers/c109 TJ=75 C O TJ=100 C O TJ=25 C O MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FOR WARD SURGE CURRENT , Ampers 1 5 10 50 100 100 NUMBER OF CYCLES AT 60Hz 8.3ms SINGLE HALF SINE-WAVE JEDC METHOD CAPACITANCE, PF TYPICAL JUNCTION CAPACITANCE REVERSE VOLTAGE, Volts 0.1 1 100 100 100010 TJ =2 5C = 1.0MHZ V = 50 V O f sig m p-p Noninductive /c87 PULSE GENERATOR *Note2 OSCILLOSCOPE *Note1
10 Noninductive/c8750 Noninductive/c87
/c40/c43/c41 /c40/c45/c41
25 Vdc
(approx) /c40/c43/c41 /c40/c45/c41 Notes: Rise Time=7ns max. Input Impedance= 1 megohm 22pF Rise Time=10ns max. Source Impedance= 50 Ohms 22pF SET TIME BAS FOR 10ns/cm +0.5A -0.25 -1.0 1cm t rr REVERSE RECOVERY TIME CHARACTERISTIC AND TEST DIAGRAM TYPICAL FORWARD CHARACTERISTICS 100 1.0 0.1 0.01 INSTANTANEOUS FORWARD VOLTAGE, Volts 50-200V 300-400V 600V T =25 C PULSE WIDTH= 300 S 2% DUTY CYCLE J O /c109 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD COPPER LAND AREAS 110