ER3A YEASHIN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

http://www.yeashin.com 1 REV.02 20121119 ER3A Thru ER3J SURFACE MOUNT SUPERFAST RECTIFIER VOLTAGE - 50 to 600 Volts CURRENT - 3.0 Ampere

FEATURES

‧For surface mounted applications ‧High temperature metallurgically bonded-no compression contacts as found in other diode-constructed rectifiers ‧Glass passivated junction ‧Built-in strain relief ‧Easy pick and place ‧Plastic package has Underwriters Laboratory Flammability Classification 94V-O ‧Complete device submersible temperature of 260°C for 10 seconds in solder bath High temperatur‧ e soldering : 260 O C / 10 seconds at terminals Pb free product at available : 99% Sn above meet RoHS ‧ environment substance directive request MECHANICAL DATA ‧Case: JEDEC DO-214AA molded plastic ‧Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 ‧Polarity: Indicated by cathode band ‧Standard packaging: 12mm tape (EIA-481) ‧Weight: 0.003 ounce, 0.093 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. ER3A ER3B ER3C ER3D ER3E ER3G ER3J UNITS Maximum Recurrent Peak Reverse Voltage 50 100 150 200 300 400 600 V Maximum RMS Voltage 35 70 105 140 210 280 420 V Maximum DC Blocking Voltage 50 100 150 200 300 400 600 V Maximum Average Forward Rectified Current, at TL=75℃ 3.0 A Peak Forward Surge Current 8.3ms single half sinewave superimposed on rated load(JEDEC method) 100.0 A Maximum Instantaneous Forward Voltage at 3.0A 0.95 1.25 1.70 V Maximum DC Reverse Current TA=25℃ At Rated DC Blocking Voltage TA=100℃ 5.0 200 µA µA Maximum Reverse Recovery Time (Note 1) 35.0 nS Typical Junction capacitance (Note 2) 45.0 pF Typical Thermal Resistance (Note 3) R θJA 16 ℃/W Operating and Storage Temperature Range TJ -55 to +150 ℃ NOTES: 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, Irr=0.25A 2. Measured at 1 MHz and applied Vr = 4.0 volts. 3. 8.0 mm2 ( .013mm thick ) land areas. .083(2.11) .075(1.91) .012(.305) .006(.152) .012(.31) .006(.15) .008(.203) .002(.051) .050(1.27) .030(0.76) SMB/DO-214AA Unit:inch(mm) .155(3.94) .130(3.30) .185(4.70) .160(4.06) .096(2.44) .083(2.13) .220(5.59) .200(5.08)

http://www.yeashin.com 2 REV.02 20121119 ER3A Thru ER3J DEVICE CHARACTERISTICS LEAD TEMPERATURE, C O AVERAGE FOR WARD CURRENT , AMPER S FORWARD CURRENT DERATING CURVE 250 60 70 80 90 100 110 4.0 3.0 2.0 1.0 45 6 100 1.0 0.1 0.01 TYPICAL REVERSE CHARACTERISTICS PERCENT OF RATED PEAK INVERSE VOLTAGE, Volts 2 4 06 08 06 08 0 1 0 0 1 2 0 1 4 0 INSTANTANEOUS REVERSE CURRENT, Ampers/c109 T J =75 C O T J =100 C O T J =25 C O MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FOR WARD SURGE CURRENT , Ampers 1 5 10 50 100 100 NUMBER OF CYCLES AT 60Hz 8.3ms SINGLE HALF SINE-WAVE JEDC METHOD CAPACITANCE, P F TYPICAL JUNCTION CAPACITANCE REVERSE VOLTAGE, Volts 0.1 1 100 100 1000 T J =2 5C = 1.0M HZ V = 50 V O f sig m p-p Noninductive /c87 PULSE GENERATOR *Note2 OSCILLOSCOPE *Note1

10 Noninductive/c8750 Noninductive/c87

/c40/c43/c41 /c40/c45/c41

25 Vdc

(approx) /c40/c43/c41 /c40/c45/c41 Notes: Rise Time=7ns max. Input Impedance= 1 megohm 22pF Rise Time=10ns max. Source Impedance= 50 Ohms 22pF SET TIME BAS FOR 10ns/cm +0.5A -0.25 -1.0 1cm t rr REVERSE RECOVERY TIME CHARACTERISTIC AND TEST DIAGRAM TYPICAL FORWARD CHARACTERISTICS 100 1.0 0.1 0.01 INSTANTANEOUS FORWARD VOLTAGE, Volts INSTANTANEOUS FORWARD CURRENT, Ampers 50-200V 300-400V 600V T =25 C PULSE WIDTH= 300 S 2% DUTY CYCLE J O /c109 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD COPPER LAND AREAS 110

http://www.yeashin.com 3 REV.02 20121119 ER3A Thru ER3J PACKAGE OUTLINE & DIMENSIONS Dimensions in inches and (millimeters) A C B 0.059 (1.50) 0.142 (3.60) 0.118 (3.00)