ER1830NPAS ETC2 | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Specifications are subject to change without notice (08.02.06) 1 Photoelectrics

  • Range: 3 m
  • Modulated infrared light
  • Supply voltage: 10 to 40 VDC
  • Output: 200 mA NPN or PNP
  • Make and break switching function, LED indication
  • Protection: Reverse polarity, short circuit, transients
  • High immunity to ambient light
  • Cable and plug versions Retro-reflective photoelectric switch with extended range up to 3 m. Easily adjustable sensitivity with 270° poten- tiometer. LED output indica- tion. Short M18 metal housing for heavy duty applications. IP 67. Easy mounting. DC and AC types, fully protected. Specifications Optical angle ± 2.2° Light spot size 150 mm at 2 m Ambient light Max. 10,000 lux Operating frequency (f) Max. 120 Hz, light/dark ratio 1:2 Response time OFF-ON (tON) ≤3.2 ms ON-OFF (tOFF) ≤5 ms Indication function Dark and light (complementary switch) Output ON LED, yellow Environment Overvoltage category III (IEC 60664/60664A; 60947-1) Pollution degree 3 (IEC 60664/60664A; 60947-1) Degree of protection IP 67 (IEC 60529; 60947-1) Temperature Operating -20° to +60°C (-4° to 140°F) Storage -30° to + 70°C (-22° to 158°F) Vibration 10 to 150 Hz, 0.5 mm/7.5 g (IEC 60068-2-6) Shock 2 x 1 m & 100 x 0.5 m (IEC 60068-2-32) Dielectric voltage 600 VAC (IEC 60364-4-41) Housing material Body Nickel plated brass Front Luran ® , black Cable end Polyester, black Nuts Nickel plated brass Retro-reflective Type ER1830.PAS, DC, Metal-housing Product Description Rated operating dist. (Sn) Up to 3 m Ref. reflector type ER4 ∅ 84 mm Sensitivity Adjustable 270° single turn pot. meter Temperature drift 0.4%/K Hysteresis (H) (Differential travel) 3 to 20% Rated operational volt. (UB) 10 to 40 VDC (ripple included) Ripple (Urpp) Max. 10% Output current Continuous (Ie) Max. 200 mA Short-time (I) 200 mA, max. load capacity 100 nF No load supply current (IO) Max. 20 mA @ 200 mA Min. operational current (Im) 0.5 mA OFF-state current (Ir) Max. 100 μA Voltage drop (Ud) Max. 2.5 V Protection Reverse polarity, short circuit overload, transients Transient voltage 1 kV/0.5 J Power ON delay (tv) Typ. 100 ms Light source GaAlAs LED, 880 nm Light type Infrared, modulated Ordering Key Type Housing diameter Range Output type Housing material Connection type ER 18 30 NPA S-1 Type Selection Housing Rated Ordering no. Ordering no. Ordering no. Ordering no. diameter operating NPN/cable NPN/plug PNP/cable PNP/plug dist. (S n) Make & break swit. Make & break swit. Make & break swit. Make & break swit. M18 3 m ER 1830 NPAS ER 1830 NPAS-1 ER 1830 PPAS ER 1830 PPAS-1

2 Specifications are subject to change without notice (08.02.06) ER1830.PAS, DC Operation Diagram Power supply Object present, light beam interrupted Output ON: Break switching (NC), WH (2) Make switching (NO), BK (4) Tv Tv Wiring Diagrams Detection Diagram PNP NPN Accessories

  • Reflectors: ER series
  • MB18A
  • APA18-RAR For further information refer to "Accessories" Dimensions 1 BN 4 BK 2 WH 3 BU Delivery Contents
  • Photoelectric switch: ER1830
  • 2 nuts
  • Packaging: plastic bag Specifications (cont.) Connection Cable Grey , 2 m, 4 x 0.35 mm2, oilproof PVC Plug M12 x 1 Cables for plug (-1) CON.1A-...series Weight Cable version 140 g Plug version 55 g Approvals UL, CSA CE-marking Yes Y X Sensor ER4 Reflector -60.0 -30.0 0.0 30.0 60.0 Distance (m) (mm) (feet) (inch) -0.8 -0.4 0.4 0.8 8.2 11.5 13 Installation Hints Relief of cable strain Protection of the sensing face Switch mounted on mobile carrierTo avoid interference from inductive voltage/ current peaks, separate the prox. switch pow- er cables from any other power cables, e.g. motor, contactor or solenoid cables Incorrect Correct The cable should not be pulled A proximity switch should not serve as mechanical stop Any repetitive flexing of the cable should be avoided