ER10-104 VISHAY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

Document Number: 13013 For tec hnical questions, contact: esta@vishay.com www.vishay.com Revision: 11-Aug-10 1 DC Filter Capacitors ER Vishay ESTA TYPE ER Capacitors offer unusually good electrical characteristics, coupled with very small size. The ER range of capacitors are manufactured using a mixed dielectric material that consists of polyester/polypropylene. The container is a rolled seamed tinplate case that is hermetically sealed. The construction is designed to prevent internal movement when subjected to shock and vibration. Note

  • The impregnant used is a non to xic highly refined, purified and inhibited mineral oil.

APPLICATIONS

The ER range of capacitors are specifically designed for DC applications.

  • Audio coupling
  • Pulse forming networks
  • Oscillator circuits
  • Arc and spark suppression
  • R F b y - p a s s
  • Tuned filters
  • Energy storage
  • Integrating circuits
  • Low and high pass filters
  • High voltage smoothing Capacitors required for AC applications and high discharge rates can also be designed from the ER range. Consult Vishay Electronic GmbH, Division Roederstein ESTA and Hybrids for your specific requirements. TEMPERATURE RANGE Temperature range is - 55 °C to + 85 °C. The nominal voltage rating is applicable from - 55 °C to + 85 °C. Derating is required for higher operating temperatures. TEMPERATURE COEFFICIENT Capacitance will increase by 2 % per 100 °C temperature change. RIPPLE The sum of the peak ripple voltage and the DC voltage should not exceed the rated voltage. Refer to graph fig. 1 for permissible peak-to-peak ripple voltage as a percentage of rated voltage for various frequencies. Fig. 1 POWER FACTOR The power factor is variable, and a function of temperature and frequency. See fig 2. Nominal value < 0.5 % at 20 °C. Fig. 2 DIELECTRIC RESISTANCE (Parallel resistance) is indica ted by the graph of insulance (MΩ x μF) vs temperature fi g 3. The insulance (M Ω x μF) is nominally 10 000 s at + 20 °C. (Measurements taken after 1 minute with an applied voltage of 500 V). Fig. 3 LIFE EXPECTANCY ER type capacitors are designed for a life exceptancy of 50 000 h at 65 °C. To achieve the same life expectancy at 85 °C derate to 60 % of rated voltage fig 4. Fig. 4 10 100 1000 % RIPPLE FREQUENCY Hz 10 000 2 % 0 % 1 % 80- 20 0 40 65 1 kHz 50 Hz Power Factor vs. Temperature at 20 °C - 40 0 40 80 MΩ x MF 102 103 104 105 Insulance vs. Temperature Typical Values 50 100 150 °C102 103 104 105 Rated Voltage Hours

www.vishay.com For technica l questions, contact: esta@vishay.com Document Number: 13013

2 Revision: 11-Aug-10

Vishay ESTA DC Filter Capacitors CAPACITANCE RANGE 0.01 μF to 100 μF. The tolerance is ± 10 %. Other tolerances are available on request. Nominal values measured at 1 kHz. VOLTAGE RANGE 1000 VDC to 40 000 VDC other values on request. TEST VOLTAGE Terminal/terminal (Vt/t) For DC rating < 20 kV Vt/t = 2.0 x rated voltage 60 s For DC rating > 20 kV Vt/t = 1.5 x rated voltage 60 s WEIGHT The approximate weight in kg of capacitors in the ER range can be estimated by multiplying the volume of the capacitor container by 1.45 (1) x 10 -6. TERMINATIONS Add suffix W to part No. To indicate wire terminations. CAPACITANCE Capacitance tolerance of 20 % is standard with those marked (1). FLASHOVER Up to 5000 V rating, the capacitor terminals will withstand 125 % of the rated voltage without flashover at a pressure of 85 mm Hg., equivalent to 50 000 feet altitude. Above

5000 V rating, the capacitor terminals will withstand 125 %

of the rated voltage at a pressure of 500 mg Hg, equivalent to 10 000 feet altitude. LIFE TESTS Conducted at 85 °C for 500 h. The voltage applied will be 140 % of the rated voltage. Fig. 5 E ± 1 A ± 1 1 mm M B C L D K TYPE DESCRIPTION PART NUMBER CAP. μF ABCDE

1000 VDC WKG

ER10-104 0.1 50 48 28 20 20 ER10-504 0.5 50 48 28 20 20 ER10-105 1.0 75 48 28 20 20 ER10-405 4.0 75 60 54 25 35 ER10-605 6.0 95 60 54 25 35 ER10-106 10.0 115 80 48 40 35 ER10-256 25.0 155 85 67 40 35 ER10-506 50.0 155 130 100 50 35

1500 VDC WKG

ER15-104 0.1 60 48 28 20 20 ER15-504 0.5 60 48 28 20 20 ER15-205 2.0 75 54 48 22 35 ER15-405 4.0 115 54 48 22 35 ER15-805 8.0 95 85 67 40 35 ER15-106 10.0 115 85 67 40 35 ER15-126 12.0 135 85 67 40 35 ER15-256 25.0 115 130 100 50 35 ER15-506 50.0 180 130 100 50 35

2000 VDC WKG

ER20-104 0.1 60 48 28 20 20 ER20-254 0.25 60 48 28 20 20 ER20-504 0.5 60 48 28 20 20 ER20-105 1.0 95 48 28 20 20 ER20-205 2.0 75 54 48 22 35 ER20-405 4.0 115 54 48 22 35 ER20-605 6.0 135 60 54 25 35 ER20-106 10.0 115 85 67 40 35 ER20-126 12.0 135 85 67 40 35 ER20-206 20.0 115 130 100 50 35

3000 VDC WKG

ER30-104 0.1 60 48 28 20 20 ER30-504 0.5 75 48 28 20 20 ER30-105 1.0 115 48 28 20 20 ER30-105X 1.0 75 54 48 22 35 ER30-205 2.0 115 54 48 22 35 ER30-405 4.0 155 60 54 25 35 ER30-605 6.0 180 80 48 40 35 ER30-805 8.0 155 85 67 40 35 ER30-106 10.0 95 130 100 50 35 ER30-206 20.0 155 130 100 50 35 ER30-256 25.0 180 130 100 50 35 ER30-104 0.1 60 48 28 20 20

4000 VDC WKG

ER40-104 0.1 60 48 28 20 20 ER40-254 0.25 75 48 28 20 20 ER40-504 0.5 95 48 28 20 20 ER40-105 1.0 95 54 48 22 35 ER40-205 2.0 135 54 48 22 35 ER40-405 4.0 115 85 67 40 35 ER40-805 8.0 115 130 100 50 35 ER40-106 10.0 135 130 100 50 35 ER40-206 20.0 230 130 100 50 35 ER40-306 30.0 320 130 100 50 35

Document Number: 13013 For tec hnical questions, contact: esta@vishay.com www.vishay.com Revision: 11-Aug-10 3 ER DC Filter Capacitors Vishay ESTA Note (1) These capacitors are fitted with one high voltage terminal and case terminal. An additional terminal for connection to case is available as an optional extra. Add suffix M to part number. TYPE DESCRIPTION PART NUMBER CAP. μF ABCDE

5000 VDC WKG

ER50-104 0.1 60 48 28 20 20 ER50-254 0.25 75 48 28 20 20 ER50-105 1.0 115 54 48 22 35 ER50-405 4.0 155 85 67 40 35 ER50-805 8.0 135 130 100 50 35 ER50-106 10.0 155 130 100 50 35 ER50-206 20.0 290 130 100 50 35 ER50-506 50.0 295 180 180 75 35

6000 VDC WKG

ER60-104 0.1 65 54 48 (1) 35 ER60-254 0.25 80 54 48 (1) 35 ER60-504 0.5 100 80 48 40 35 ER60-105 1.0 100 85 67 40 35 ER60-205 2.0 100 130 100 50 35 ER60-405 4.0 135 130 100 50 35 ER60-605 6.0 180 130 100 50 35 ER60-805 8.0 250 130 100 50 35 ER60-106 10.0 290 130 100 50 35 ER60-126 12.0 345 130 100 50 35 ER60-206 20.0 180 220 164 125 60

8000 VDC WKG

ER80-503 0.05 58 60 54 (1) 60 ER80-104 0.1 65 60 54 (1) 60 ER80-254 0.25 85 60 54 (1) 60 ER80-504 0.5 140 60 54 (1) 60 ER80-105 1.0 120 85 67 40 60 ER80-205 2.0 120 130 100 50 60 ER80-405 4.0 200 130 100 50 60 ER80-605 6.0 270 130 100 50 60 ER80-805 8.0 345 130 100 50 60 ER80-156 15.0 280 180 180 75 60 10 000 VDC WKG ER100-503 0.05 58 80 48 40 60 ER100-104 0.1 65 80 48 54 60 ER100-504 0.5 140 80 48 40 60 ER100-105 1.0 160 85 67 40 60 ER100-205 2.0 140 130 100 50 60 ER100-405 4.0 260 130 100 50 60 ER100-605 6.0 350 130 100 50 60 ER100-805 8.0 300 190 120 75 60 ER100-156 15.0 350 180 180 75 60 TYPE DESCRIPTION PART NUMBER CAP. μF ABCDE 12 000 VDC WKG ER120-503 0.05 75 85 67 40 60 ER120-104 0.10 100 85 67 40 60 ER120-254 0.25 105 85 67 40 60 ER120-105 1.0 145 130 100 75 60 ER120-205 2.0 240 130 100 75 60 ER120-405 4.0 280 190 120 75 60 15 000 VDC WKG ER150-103 0.01 60 60 54 (1) 60 ER150-203 0.02 60 60 54 (1) 60 ER150-503 0.05 85 60 54 (1) 60 ER150-104 0.10 105 80 48 (1) 60 ER150-254 0.25 125 85 67 40 60 ER150-504 0.50 190 85 67 40 60 ER150-504X 0.50 105 130 100 75 60 ER150-105 1.0 160 130 100 75 60 ER150-205 2.0 190 159 120 75 60 20 000 VDC WKG ER200-103 0.01 70 80 48 (1) 60 ER200-503X 0.05 85 85 67 40 60 ER200-104 0.1 105 85 67 40 60 ER200-254 0.25 190 85 67 40 60 ER200-504 0.5 160 130 100 75 60 ER200-105 1.0 300 130 100 75 60 ER200-205 2.0 250 180 180 90 100 ER200-405 4.0 305 240 180 100 100 25 000 VDC WKG ER250-503 0.05 110 85 67 (1) 70 ER250-104X 0.1 95 130 100 65 70 ER250-254 0.25 130 130 100 65 70 ER250-504 0.5 250 130 100 65 70 30 000 VDC WKG ER300-303 0.03 120 85 67 (1) 70 ER300-104 0.1 200 85 67 (1) 70 ER300-104X 0.1 120 130 100 65 70 ER300-504 0.5 315 130 100 65 70 ER300-105 1.0 295 180 180 75 100 40 000 VDC WKG ER400-303 0.03 160 85 67 (1) 70 ER400-503 0.05 210 85 67 (1) 70 ER400-503X 0.05 125 130 100 65 70

Document Number: 91000 www.vishay.com Revision: 11-Mar-11 1 Disclaimer Legal Disclaimer Notice Vishay ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA AR E SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of pro ducts for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in gene ric applications. Such statements are not binding statements about the suitability of products for a partic ular application. It is the customer’s responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. Parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. All operating parameters, including typical pa rameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s term s and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product co uld result in person al injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.