ER1000_V01 WTE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

Features

 G l a s s P a s s i v a t e d D i e C o n s t r u c t i o n B  Superfast 35nS and 50nS Recovery Time  Low Forward Voltage Drop C  L o w R e v e r s e L e a k a g e C u r r e n t  H i g h S u r g e C u r r e n t C a p a b i l i t y G A  Epoxy Meets UL 94V-0 Classification  Ideally Suited for Use in High Frequency P I N 1 3 SMPS, Inverters and As Free Wheeling Diodes D M e c h a n i c a l D a t a F E  Case: TO-220A, Molded Plastic  Terminals: Plated Leads Solderable per P MIL-STD-202, Method 208  P o l a r i t y : S e e D i a g r a m I  Weight: 1.9 grams (approx.)  Mounting Position: Any H L  Mounting Torque: 0.6 N.m Max.  Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Part Number, See Page 4 P I N 1 J P I N 3 C a s e K Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol ER 1000 ER 1001 ER 1001A ER 1002 ER 1003 ER 1004 ER

1006 Unit

Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 50 100 150 200 300 400 600 V RMS Reverse Voltage VR(RMS) 35 70 105 140 210 280 420 V Average Rectified Output Current @T C = 100°C I O 10 A Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) I FSM 150 A Forward Voltage @I F = 10A V FM 0.95 1.3 1.7 V P e a k R e v e r s e C u r r e n t @ TC = 25°C At Rated DC Blocking Voltage @T C = 100°C IRM 10 500 µA Reverse Recovery Time (Note 1) trr 35 50 nS Typical Junction Capacitance (Note 2) CJ 70 50 pF Thermal Resistance Junction to Ambient Thermal Resistance Junction to Case RǀJA RǀJC 3.0 °C/W Operating and Storage Temperature Range T J, TSTG -55 to +150 °C ER1000 – ER1006 10A GLASS PASSIVATED SUPERFAST RECTIFIER WON-TOP ELECTRONICS TO-220A Dim Min Max A 13.90 15.90 B 9.80 10.70 C 2.54 3.43 D 3.56 4.56 E 12.70 14.73 F 0.51 0.96 G 3.55 Ø 4.09 Ø H 5.75 6.85 I 4.16 5.00 J 2.03 2.92 K 0.30 0.65 L 1.14 1.40 P 4.83 5.33 All Dimensions in mm

w w w . w o n t o p . c o m © W o n - T o p E l e c t r o nics Co., Ltd.

2 R e v i s i o n : S eptember, 2012

ER1000 – ER1006 WON-TOP ELECTRONICS TC, CASE TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 15 30 45 60 75 90 105 120 135 150 I(AV), AVERAGE FORWARD RECTIFIED CURRENT (A) Resistive or Inductive Load VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 0.1 1.0 100 IF, INSTANTANEOUS FORWARD CURRENT (A) NUMBER OF CYCLES AT 60Hz Fig. 3 Forward Surge Current Derating Curve 10 100 120

150 IFSM, PEAK FORWARD SURGE CURRENT (A)

PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics 20 40 60 80 100 120 140 0.01 0.1 1.0 100 1000IR, INSTANTANEOUS REVERSE CURRENT (µA) Single Half-Sine-Wave JEDEC Method 0.1 VR, DC REVERSE VOLTAGE (V) Fig. 6 Typical Junction Capacitance 1 10 100 CJ, JUNCTION CAPACITANCE (pF) f = 1MHz 120 160 200 ER1000 – ER1002 ER1003 – ER1006 IF(AV), AVERAGE FORWARD CURRENT (A) Fig. 5 Forward Power Dissipation 8 12 16 PD, POWER DISSIPATION (W) 4 20 DC, TJ = 150°C ER1003 ER1004 ER1006 ER1000 – ER1002 TC = 25°C TC = 125°C TC = 100°C ER1003 ER1004 ER1006 ER1000 – ER1002

© W o n - T o p E l e c t r o n i c s C o . , L t d . www.wontop.com Revision: September, 2012 3 MARKING INFORMATION PACKAGING INFORMATION Tube Size L x W x H (mm) Quantity (PCS) Inner Box Size L x W x H (mm) Quantity (PCS) Carton Size L x W x H (mm) Quantity (PCS) Approx. Gross Weight (KG) 525 x 31 x 6 50 555 x 145 x 95 2,000 572 x 306 x 218 8,000 19.0 RECOMMENDED SCREW MOUNTING ARRANGEMENT ER1000 – ER1006 WON-TOP ELECTRONICS Note: 1. Anti-static tube, water clear color. BULK ER100x = Device Number x = 0, 1, 1A, 2, 3, 4 or 6 Polarity = As Marked on Body Plain Washer Insulating Bushing Rectifier Insulator Heatsink Compression Washe r 4-40 HEX Nut Recommended isolated mounting when screw is at heatsink potential. 4-40 hardware is used. Screw should not be tightened with any type of air-forced torque or equipment that may cause high impact on device package. The insulating bushing inside the mounting hole will insure the screw threads do not contact the metal base. The interface should apply a layer of thermal grease or a highly conductive thermal pad for better heat dissipation. 4-40 PAN or HEX Head Screw ER100x

w w w . w o n t o p . c o m © W o n - T o p E l e c t r o nics Co., Ltd.

4 R e v i s i o n : S eptember, 2012

WON-TOP ELECTRONICS and are registered trademarks of Won- Top Electronics Co., Ltd (WTE). WTE has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. We power your everyday. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung 806, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417 Email: sales@wontop.com Internet: http://www.wontop.com ER1000 – ER1006 WON-TOP ELECTRONICS

ORDERING INFORMATION

Product No. Package Type Shipping Quantity ER1000 TO-220A 50 Units/Tube ER1001 TO-220A 50 Units/Tube ER1001A TO-220A 50 Units/Tube ER1002 TO-220A 50 Units/Tube ER1003 TO-220A 50 Units/Tube ER1004 TO-220A 50 Units/Tube ER1006 TO-220A 50 Units/Tube 1. Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. 2. To order RoHS / Lead Free version (with Lead Free finish), add “-LF” suffix to part number above. For example, ER1000-LF.