EPKV-10M AXTAL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 1

Technical content

www.AXTAL.com Wasemweg 5 page 1(1) fon: +49 (6261) 939834 D-74821 Mosbach fax +49 (6261) 939836 Germany E-mail: info@axtal.com G m b H&C o .K G min 0.02 0.171 1 - surface, on which the force sensitive quartz crystal is mounted 2 - force sensitive quartz crystal EPKV-10M. 3 - undercut. 4 - contact leads. FORCE SENSITIVE QUARTZ CRYSTAL EPKV-10M

APPLICATIONS

The force sensitive quartz crystal EPKV-10M is intended for operation in a structure of precision electronic balances. It converts face shear strain into a frequency variation. Using this crystal, it is possible to design balances for weighing with a split-h air accuracy of weights by a mass from several milligrams up to hundreds of kilograms.

FEATURES

  • High resolution and accuracy - Long term quartz crystal stability - Wide temperature range (-40…+80 °C) - Low power consumption - Suitable for precision weighting equipment - Cost effective OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS SPECIFICATIONS AND REMARKS UNITS

Electrical characteristics

Frequency range (fundamental mode), fO 9960…10100 kHz Resonance Resistance typ./max., Rr 30; 50 / 50 kΩ Drive Level max., DL 1.0 mW Operating conditions Force sensitivity 3.5 ± 0.3 Hz/gm Operating temperature, TOPR (typ./max) -40…+80 / -60…+100 °C Storage temperature, TSTR +5…+40 °C Maximum frequency deviation 9.8 ± 0.85 kHz Maximum stress-strain load ± 5… ± 20 kg Frequency Tolerance, ∆f/fO ± 50 ppm Aging first year/next years max. ± 5 / ± 25 ppm Static Capacitance typ., CO 9.1…8.1 pF Capacitance ratio r 200 Size 4 x 10 x 0.17 mm One side with one electrode of the force sensitive quartz crystal EPKV-10M is glued by epoxy adhesive on a cleaned and skim surface, thus the central part of the crystal should be free (see figure). After curing of the glue, the two wires are soldered to the contacts of the crystal, if required. If the crystal is in a free condition, its force sensitivity characteristic is practically linear. If the crystal is mounted, a nonlinearity of the force sensitivity characteristic occurs, which must be determined individually. EXTERNAL DIMENSIONS UNITS: millimeters