EPH3R3030 SHINDENGEN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
/K39/K30 /K38/K35 /K38/K30 /K37/K35 /K37/K30 /K36/K35 /K36/K30 /K35/K35 /K35/K30 /K34/K35 /K34/K30 /K30 /K30/K2E/K35 /K31/K2E/K30 /K31/K2E/K35 /K32/K2E/K30 /K32/K2E/K35 /K30/K2E/K35 /K31/K2E/K30 /K31/K2E/K35 /K32/K2E/K30 /K32/K2E/K35/K33/K2E/K30 /K30 /K33/K2E/K30 /K30 /K33/K2E/K35 /K33/K2E/K30 /K32/K2E/K35 /K32/K2E/K30 /K31/K2E/K35 /K31/K2E/K30 /K30/K2E/K35 /K35 /K30 /K33/K2E/K35 /K33/K2E/K34 /K33/K2E/K33 /K33/K2E/K32 /K33/K2E/K31 /K33/K2E/K30 /K30 /K34/K33/K32/K31 ∆/K31/K32 /K30/K6D/K56 /K33/K2E/K34/K34/K38/K56/K28/K56/K69/K6E /K3D/K37/K35/K56/K29 /K33/K2E/K33/K32/K38/K56/K28/K56/K69/K6E /K3D/K37/K35/K56/K29 /K56/K69/K6E /K3D/K33/K36/K56 /K56/K69/K6E /K3D/K34/K38/K56 /K56/K69/K6E /K3D/K36/K30/K56 /K56/K69/K6E /K3D/K37/K35/K56 /K56/K69/K6E /K3D/K33/K36/K56 /K56/K69/K6E /K3D/K34/K38/K56 /K56/K69/K6E /K3D/K36/K30/K56 /K56/K69/K6E /K3D/K37/K35/K56 /K56/K69/K6E /K3D/K37/K35/K56 /K3D/K34/K38/K56 /K3D/K36/K30/K56 /K3D/K33/K36/K56 /K30 /K30/K37 /K31/K32/K33/K34/K35 /K36 /K56/K69/K6E /K3D/K33/K36/K56 /K3D/K34/K38/K56 /K3D/K36/K30/K56 /K3D/K37/K35/K56 /K31 /K32 /K33 /K34 /K45/K66/K66/K69/K63/K69/K65/K6E/K63/K79 /K43/K75/K72/K76/K65 /K28/K54/K61/K3D/K32/K35 °/K43/K29 /K49/K6F /K5B/K41/K5D /K4C/K6F/K73/K73 /K43/K75/K72/K76/K65 /K28/K54/K61/K3D/K32/K35 °/K43/K29 /K49/K6F /K5B/K41/K5D /K4C/K6F/K61/K64 /K52/K65/K67/K75/K6C/K61/K74/K69/K6F/K6E /K28/K54/K61 /K3D/K32/K35 °/K43/K29 /K49/K6F /K5B/K41/K5D /K45/K46/K46 /K5B/K25/K5D /K4C/K6F/K73/K73 /K5B/K57/K5D/K56/K6F /K5B/K56/K5D /K4F/K76/K65/K72 /K43/K75/K72/K72/K65/K6E/K74 /K28/K54/K61/K3D/K38/K35 °/K43/K29 /K49/K6F /K5B/K41/K5D /K56/K6F /K5B/K56/K5D EPH3R3030 [ 1] Electrical Specification Output Side Ta − 40 ~ 85 °C Vi 36 ~75 V Unit Output ConditionsCharacteristics Max.Typ.Min. V3.463.33.2Ta = 25°C Io = 0~3 A Vi = 48 VOutput Voltage Initial SettingVo mV30Io = 3 A Vi = 36~75 VLine Regulation mV75Io = 0~3 A Vi = 48 VLoad Regulation A30Output CurrentIo W10 Po Max A3.1Output Over Current Limit V4.623.96Output Over Voltage Protection V2.97Output Low Voltage Protection mV P P1003020 Hz~5 MHz 0.6 Hz ~50 MHzIo = Io Max.Output Ripple & NoiseVoac dB µV80 [ 2 ] Efficiency & Power Dissipation UnitMax.Typ.Min.ConditionsCharacteristics %84I o = 3 A V i = 4 8 VEfficiencyη W1.8I o = 3 A V i = 4 8 VPower DissipationPd
/K43/K6F/K6E/K74/K72/K6F/K6C /K43/K69/K72/K63/K75/K69/K74 /K41/K4C/K4D /K53/K57/K56/K69/K6E /K33/K36 /K7E /K37/K35/K56 /K46/K75/K73/K65 /K56/K69/K6E/K2D /K56/K69/K6E/K2B /K52/K45/K4D/K4F/K54/K45 /K53/K54 /K41/K52/K54 /K6F/K75/K74 /K53/K54 /K41/K52/K54 /K69/K6E /K50/K45/K43 /K69/K6E /K50/K45/K43 /K6F/K75/K74 /K4F/K50/K50/K53 /K54/K45/K53/K54 /K2B /K2D /K44/K72/K69/K76/K65 /K4C/K6F/K61/K64 /K56/K6F/K75/K74 /K2D /K56/K6F/K75/K74 /K2B /K44/K43 /K2F /K44/K43 /K63/K6F/K6E/K76/K65/K72/K74/K65/K72 /K50/K6F/K77/K65/K72 /K6F/K6E /K62/K79 /K73/K77/K69/K63/K68 /K44/K43 /K2F /K44/K43 /K43/K4F/K4E/K56/K45/K52/K54/K45/K52 * Please connect from PECin PIN, STARTin PIN, OPPS PIN to Vin-PIN in Natural Convection. * TEST PIN is always open. * We recommend to insert fuses (2A) Vin-lines for EPH series. /Edi0 Application 1 [Single operation]
/K43/K6F/K6E/K74/K72/K6F/K6C /K43/K69/K72/K63/K75/K69/K74 /K41/K4C/K4D /K53/K57/K56/K69/K6E /K33/K36 /K7E /K37/K35/K56 /K46/K75/K73/K65 /K56/K69/K6E/K2D /K56/K69/K6E/K2B /K52/K45/K4D/K4F/K54/K45 /K53/K54 /K41/K52/K54 /K6F/K75/K74 /K53/K54 /K41/K52/K54 /K69/K6E /K50/K45/K43 /K69/K6E /K50/K45/K43 /K6F/K75/K74 /K4F/K50/K50/K53 /K54/K45/K53/K54 /K2B /K2D /K44/K72/K69/K76/K65 /K56/K6F/K75/K74/K2D /K56/K6F/K75/K74/K2B /K43/K6F/K6E/K74/K72/K6F/K6C /K43/K69/K72/K63/K75/K69/K74 /K41/K4C/K4D /K46/K75/K73/K65 /K56/K69/K6E/K2D /K56/K69/K6E/K2B /K52/K45/K4D/K4F/K54/K45 /K53/K54 /K41/K52/K54 /K6F/K75/K74 /K53/K54 /K41/K52/K54 /K69/K6E /K50/K45/K43 /K69/K6E /K50/K45/K43 /K6F/K75/K74 /K4F/K50/K50/K53 /K54/K45/K53/K54 /K44/K72/K69/K76/K65 /K56/K6F/K75/K74/K2D /K56/K6F/K75/K74/K2B /K44/K43 /K2F /K44/K43 /K63/K6F/K6E/K76/K65/K72/K74/K65/K72 /K50/K6F/K77/K65/K72 /K6F/K6E /K62/K79 /K73/K77/K69/K63/K68 /K44/K43 /K2F /K44/K43 /K43/K4F/K4E/K56/K45/K52/K54/K45/K52 /K31 /K4C/K6F/K61/K64 /K44/K43 /K2F /K44/K43 /K43/K4F/K4E/K56/K45/K52/K54/K45/K52 /K32 * Please connect parallel for REMOTE and ALARM signals. * Please connect loop line for PEC and START. * Please connect from OPPS PIN to Vin-PIN in Natural Convection. * TEST PIN is always open. * Please insert necessarily fuses (250V 2A) Vin-lines for EPH series. /Edi0 Application 2 [Parallel operation]
/K33/K32/K32/K2E/K36 /K33/K31/K35/K2E/K30 /K31/K33/K35/K2E/K39 /K33/K32/K2E/K30 /K31/K32/K2E/K31/K39 /K43/K33 /K34/K34/K2E/K30 /K36×/K50/K34/K34/K2E/K30/K3D/K32/K36/K34/K2E/K30 /K31/K30/K2E/K31/K36 /K33 × /K50/K33/K32/K2E/K30/K3D/K39/K36/K2E/K30 Notes : 1. The shape of the tray complies with JEDEC standards. ɹ ɹ 2. Product carrying capacity : 28 pcs./tray ɹɹ 3. Heat resistant temperature : 150 ° C max. (high heat resistance type) ɹɹ 4. The following markings must be indicated on the handle : ɹɹɹɹ 1) Company name : Shindengen ɹ2) Package name : MSOP-14ɹ3) Heat resistant temperature ɹ4) Material
/K4D/K6F/K64/K75/K6C/K61/K72 /K6C/K65/K61/K64 /K3A /K32/K32/K30 °/K43 /K6D/K61/K78/K2E /K33/K30/K30 /K32/K35/K30 /K32/K30/K30 /K31/K35/K30 /K31/K30/K30 /K35/K30 /K30 /K30 /K34/K30 /K38/K30 /K31/K32/K30 /K31/K36/K30 /K32/K30/K30 /K32/K34/K30 /K32/K38/K30 /K33/K30/K30 /K28/K53/K65/K63/K6F/K6E/K64/K73/K29 /K28 °/K43/K29 /K32/K32/K30 °/K43 /K6D/K69/K6E/K2E /K57/K69/K74/K68/K69/K6E /K34/K30 /K73/K65/K63/K6F/K6E/K64/K73 /K57/K69/K74/K68/K69/K6E /K35 /K73/K65/K63/K6F/K6E/K64/K73 1) The atmospheric temperature of the modular lead should be 220 ° C for no more than 5 seconds. 2) Refer to the graph above for an example of a recommended profile. 3) Precautions Concerning Heating Method Since allowing the PWB to stand at a high temperature for an extended period of time may have a detrimental effect on reliabil ity, it is necessary to perform soldering as quickly as possible to prevent the temperature of the PWB from rising excessively. In addition, since areas of local temperature rise may occur when using a halogen lamp or infrared heater, avoid irradiating t he surface of the PWB directly. /Edi0 Temperature Profile