EPC200

EPC200 EPC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

Features

■ Low dark current ■ High sensitivity ■ High dynamic range ■ CSP package with very small footprint ■ Customer specific wavelength filter on request ■ Fully standard SMD assembly process compatible

Applications

■ Light barriers and light curtains ■ Light barriers ranging from millimeters to tens of meters ■ Light curtains ■ Smoke detectors ■ Liquid detectors ■ Heart beat monitors ■ Oximeters ■ Position detection (rotary, linear, angle, etc.) ■ IR remote control of Hi-Fi, TV sets and other equipment Product image Figure 1: epc200 photo diodes © 2014 ESPROS Photonics Corporation Characteristics subject to change without notice 1 / 6 Datasheet epc200 - V1.2 www.espros.ch

Absolute Maximum Ratings (Notes 1, 2) Recommended Operating Conditions Reverse Voltage VR Storage Temperature Range (TS) Lead Temperature solder, 4 sec. (TL) Expected Lifetime (MTBF) 30.0 V -40°C to +85°C +260°C 500 * 106 h @ 25°C (<2 FIT) Reverse Voltage (VR) Operating Temperature (TA) Relative Humidity (non-condensing) Min. 1.5 -40 Max. 20.0 +85 +95 Units V Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Recommended operating conditions indicate conditions for which the device is intended to be functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see Electrical Characteristics. Note 2: This device is a highly sensitive CMOS photodiodes with an ESD rating of JEDEC HBM class 2 (2kV to <4kV). Handling and as- sembly of this device should only be done at ESD protected workstations. General Characteristics Unless otherwise stated, measuring parameters are VR = 5.0 V, -40°C < TA < +85°C, RL = 50 Ω Symbol Parameter Conditions/Comments Values Units Min. Typ. Max. λS max. Wavelength max. Sensitivity 850 nm λ Wavelength Range S = 20 % of Smax 450 1050 nm Sλ Spectral Sensitivity λ = 850nm, VR = 5V, Ie = 1 mW/cm2 λ = 950nm, VR = 5V, Ie = 1 mW/cm2 0.61 0.43 A/W A/W η Quantum Efficiency λ = 850nm, VR = 5V, Ie = 1 mW/cm2 λ = 950nm, VR = 5V, Ie = 1 mW/cm2 φ Half angle ±60 ° VO Open Circuit Voltage Ie = 0.5 mW/cm2 250 mV TCV Temperature Coefficient of ISC 0.25 %/K TCO Temperature Coefficient of VO -3.0 mV/K IP Photo Current VR = 5V, Ie = 1 mW/cm2, λ = 850 nm VR = 5V, Ie = 1 mW/cm2, λ = 950 nm 18.7 13.2 μA IR Dark Current VR = 5 V, TA= 20°C VR = 20 V, TA= 20°C Selected types with reduced dark current on request 20 nA ISC Short-circuit Current Ie = 1 mW/cm2, λ = 850 nm 20 μA tr Rise/Fall Time VR = +1.5 V photo current measured at RL = 50 Ω , λ = 850 nm, IP = 200 μA 300 ns VR = +5.0 V 140 VR = +10.0 V 70 CO Capacitance VR = +5V, ƒ = 100kHz, E = 0 22 pF NEP Noise Equivalent Power VR = 5 V 1.2x10-14 W/√Hz Connection Diagram TOP VIEW 3Cathodes are connected on chip Pin Assignment

1 Cathode

2 Cathode

3 Cathode

4 Cathode

5 Anode

Figure 2: Chip connections © 2014 ESPROS Photonics Corporation Characteristics subject to change without notice 2 / 6 Datasheet epc200 - V1.2 www.espros.ch

(typical values, Tamb = 25°C, VDD = 5.0V, IPD=0mA) 0 20 40 60 80 100 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Angle [°] Relative Sensitivity Relative sensitivity vs. illumination angle Relative spectral sensitivity (no daylight filter) 1E-4 1E-3 1E-2 1E-1 1E+0 1E+1 1E-3 1E-2 1E-1 1E+0 1E+1 1E+2 1E+3 Ie [mW/cm2] Ip [μA] Photocurrent IP = ƒ(Ie), VR = 5 V, λ=850nm Rise/ fall time versus reverse bias voltage © 2014 ESPROS Photonics Corporation Characteristics subject to change without notice 3 / 6 Datasheet epc200 - V1.2 www.espros.ch tbd 400 500 600 700 800 900 1000 1100 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Wavelength [nm] Relative Sensitivity 0 1 2 3 4 5 6 7 8 9 10 100 200 300 400 Rise Time Fall Time Reverse Bias Voltage [V] RIse / Fall time [ns], 10% - 90%

ESPROS Photonics AG and its subsidiaries (epc) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to epc’s terms and conditions of sale supplied at the time of order acknowledgment. epc warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with epc’s standard warranty. Testing and other quality control techniques are used to the extent epc deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. epc assumes no liability for applications assistance or customer product design. Customers are responsible for their products and appli- cations using epc components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. epc does not warrant or represent that any license, either express or implied, is granted under any epc patent right, copyright, mask work right, or other epc intellectual property right relating to any combination, machine, or process in which epc products or services are used. Information published by epc regarding third-party products or services does not constitute a license from epc to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from epc under the patents or other intellectual property of epc. Resale of epc products or services with statements different from or beyond the parameters stated by epc for that product or service voids all express and any implied warranties for the associated epc product or service. epc is not responsible or liable for any such statements. epc products are not authorized for use in safety-critical applications (such as life support) where a failure of the epc product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applica- tions, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of epc products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by epc. Further, Buyers must fully indemnify epc and its representatives against any damages arising out of the use of epc products in such safety-critical applications. epc products are neither designed nor intended for use in military/aerospace applications or environments unless the epc products are specifically designated by epc as military-grade or "enhanced plastic." Only products designated by epc as military-grade meet military specifications. Buyers acknowledge and agree that any such use of epc products which epc has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. epc products are neither designed nor intended for use in automotive applications or environments unless the specific epc products are designated by epc as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, epc will not be responsible for any failure to meet such requirements. © 2014 ESPROS Photonics Corporation Characteristics subject to change without notice 6 / 6 Datasheet epc200 - V1.2 www.espros.ch