EPA220-32 PCA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 1

Technical content

E L E C T R O N I C S I N C . 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 TEL: (818) 892-0761 FAX: (818) 894-5791 Input Pulse Test Conditions @ 25°C Unit EIN Pulse Input Voltage 3.2 Volts PW Pulse Width % of Total Delay 150 % TRI Input Rise Time (0.75 - 2.4 Volts) 2.0 nS PRR Pulse Repetition Rate @ PW £ 500nS 1.0 MHz Pulse Repetition Rate @ PW > 500nS 100 KHz VCC Supply Voltage 5.0 Volts Test Conditions Min Max Unit VIH High Level Input Voltage VCC = 4.5 to 5.5 2.0 Volt VIL Low Level Input Voltage VCC = 4.5 to 5.5 0.8 Volt VOH High Level Output Voltage VCC = 4.5V,IO =-4.0mA 4.0 Volt @VIH or VIL VOL Low Level Output Voltage VCC = 4.5V,IO = 4.0mA 0.3 Volt @VIHor VIL IL Input Leakage Current V CC = 5.5V @VIH or VIL ±1.0 uA ICCL Supply Current V CC = 5.5V, VIN=0 15 mA TRO Output Rise Time £550 nS (.75 - 2.4 Volts) 4 nS Schematic Parameter EPA220 10/92 Package DimensionsRecommended Operating Conditions Min Max Unit VCC DC Supply Voltage 4.5 5.5 Volt VI DC Input Voltage Range 0 V CC Volt VO DC Output Voltage Range 0 V CC Volt PW* Pulse Width % of Total Delay 40 % D* Duty Cycle 40 % TA Operating Free Air Temperature 0 70 °C *These two values are inter-dependent. Tap Delays Total Delay Part ±5% or ±2 nS ±5% or ±2 nS Number

14 Pin DIL 5 Tap High Speed CMOS

(HCT) Compatible Active Delay Lines Tap Delays Total Delay Part ±5% or ±2 nS ±5% or ±2 nS Number 20 40 60 80 25 50 75 100 30 60 90 120 35 70 105 140 40 80 120 160 50 100 150 200 60 120 180 240 70 140 210 280 100 125 150 175 200 250 300 350 EPA220-100 EPA220-125 EPA220-150 EPA220-175 EPA220-200 EPA220-250 EPA220-300 EPA220-350 * Inherent Delay • Delay times referenced from input to leading edges at 25°C, 5.0V. 12* 17 22 27 12* 18 24 30 12* 19 26 33 12* 20 28 36 12* 21 30 39 12* 22 32 42 12* 24 36 48 15 30 45 60 19 38 57 76 EPA220-32 EPA220-36 EPA220-40 EPA220-44 EPA220-48 EPA220-52 EPA220-60 EPA220-75 EPA220-95 NH High Fanout LSTTL Load VCC = 5.5V, VOH = 4.0V 10 IO DC Output Source/Sink Current 25 mA 12 4 10 6 8 OUTPUT GROUND INPUT

14 VCC

.180 Max..015 .100 .800 Max. .300 PCA EPA220-32 Date Code .400 Max.