EN05 TTELEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 7

Technical content

© TT electronics plc General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics ’ own data and is considered accurate at time of going to print. TT Electronics | BI Technologies

413 Rood RD, Suite 7

Calexico, CA 92231 Ph: + 1 (714) 447-2345 www.ttelectronics.com Rev - 04/2021 Page 1 Features:

  • Compact design
  • 2 bits gray code
  • Incremental/contacting type
  • Plastic Hollow Shaft
  • Vertical and Horizontal mount versions

Electrical Characteristics

Description: 5 mm encoder is the smallest available. It is a good fit for various small electronic applications such as frequency modulation, volume adjustment, and function switching. Applications:

  • Mice
  • Earphones
  • Radios
  • Electronic toys
  • E-cigarettes TA = 25°C unless otherwise noted Output 2 Bits Gray Code Pulses (Per Revolution) 12 Phase Difference 0.15T ± 0.1T Power Rating 5 Vdc / 10 mA Insulation Resistance 50MΩ 1 Minute at 50 Vdc Max. Dielectric Strength 1 Minute at 50 Vac Chattering 5 ms maximum Bounce 5 ms maximum

© TT electronics plc General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics ’ own data and is considered accurate at time of going to print. TT Electronics | BI Technologies Calexico, CA 92231 Ph: + 1 (714) 447-2345 www.ttelectronics.com Rev - 04/2021 Page 2 Encoder Characteristics Environmental Characteristics TA = 25°C unless otherwise noted Rotation 360º continuous Rotational Torque 10-80 gf.cm Detents per Rotation 12 Detent Torque 42 ±38 gf.cm Rotational Life 100,000 Cycles Min. TA = 25°C unless otherwise noted Operating Temperature -40°C to +85°C IP Rating IP 40 Soldering Condition Wave/Reflow Soldering 260°C maximum for 1-3 seconds Hand Soldering 350°C maximum for 3 seconds RoHS Please refer to TT Electronics website REACH Please refer to TT Electronics website Ordering EN05 HS 12 12 N HH Part Family Style HS = Top Adjust, Surface Mount VS = Side Adjust, Surface Mount VT = Side Adjust, Thru Hole Pulses/360° 12 = 12 pulses Detent/Rotation 12 = 12/360° Switch Option N = No Switch Shaft Style HH = Hollow Hex Shaft

© TT electronics plc General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics ’ own data and is considered accurate at time of going to print. TT Electronics | BI Technologies Calexico, CA 92231 Ph: + 1 (714) 447-2345 www.ttelectronics.com Rev - 04/2021 Page 3 Outline Drawings EN05HS1212NHH - Top Adjust, Surface Mount

© TT electronics plc General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics ’ own data and is considered accurate at time of going to print. TT Electronics | BI Technologies Calexico, CA 92231 Ph: + 1 (714) 447-2345 www.ttelectronics.com Rev - 04/2021 Page 4 Outline Drawings EN05VS1212NHH - Side Adjust, Surface Mount

© TT electronics plc General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics ’ own data and is considered accurate at time of going to print. TT Electronics | BI Technologies Calexico, CA 92231 Ph: + 1 (714) 447-2345 www.ttelectronics.com Rev - 04/2021 Page 5 Outline Drawings EN05VT1212NHH - Side Adjust, Thru Hole

© TT electronics plc General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics ’ own data and is considered accurate at time of going to print. TT Electronics | BI Technologies Calexico, CA 92231 Ph: + 1 (714) 447-2345 www.ttelectronics.com Rev - 04/2021 Page 6 Output Phase Shift Recommended Filter Schematic Shaft Detail

© TT electronics plc General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics ’ own data and is considered accurate at time of going to print. TT Electronics | BI Technologies Calexico, CA 92231 Ph: + 1 (714) 447-2345 www.ttelectronics.com Rev - 04/2021 Page 7 Packaging Standard Packaging Style VT - Plastic Trays Style HS & VS - Tape & Reel - 1400 reel - 16mm embossed tape, - 12 mm pitch, 330 mm reel Included Hardware None