EM02-100 PROTEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

105267.R0 5/07 www.protekdevices.com EM02-100 EMI FILTER/TVS ARRAY 05267

APPLICATIONS

✔ Cellular Phones ✔ Color LCD Display Panel ✔ Notebooks ✔ Personal Digital Assistant (PDA) ✔ Ground Positioning System (GPS) ✔ SMART Cards IEC COMPATIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV

FEATURES

✔ ESD Protection > 25 kilovolts ✔ EMI Filtering/TVS Low Pass Filters ✔ > 25db Attenuation from 800MHz to 3GHz ✔ Protects up to Two(2) Data Lines ✔ RoHS Compliant MECHANICAL CHARACTERISTICS ✔ SOT-563 Package ✔ Available in Lead-Free Pure-Tin Plating(Annealed) ✔ Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C ✔ Consult Factory for Leaded Device Availability ✔ Flammability Rating UL 94V-0 ✔ Device Marking: Marking Code ✔ 8mm Tape and Reel Per EIA Standard 481 PIN CONFIGURATION SOT-563 For Each Line /MT49/MT48/MT48/MT32/MT79/MT104/MT109 /MT49/MT53/MT112/MT70 /MT49/MT53/MT112/MT70 /MT73/MT47/MT79/MT110 /MT71/MT78/MT68 /MT73/MT47/MT79/MT110

205267.R0 5/07 www.protekdevices.com EM02-100 DEVICE CHARACTERISTICS FIGURE 1 TYPICAL FILTER PERFORMANCE (TA = 25C, DC BIAS = 0V, 50OHM ENVIRONMENT) Insertion Loss - dB Frequency - MHz -40 -30 -20 -10 1 10 100 1000 10000 Storage Temperature SYMBOL V ALUE 400 mW °C-55°C to 150°C UNITS TSTG P PARAMETER DC Power Per Resistor Operating Temperature TL -40°C to 85°C °C MAXIMUM RATINGS @ 25°C Unless Otherwise Specified Typical Resistance @ ± 20% R 100 OHMS Soldering Temperature for 10 seconds °C265TL Note 1: 50pF @ 0V, 1MHz, ± 20% tolerance. PART NUMBER DEVICE MARKING CODE MINIMUM BREAKDOWN VOLTAGE @ 1mA V(BR) VOLTS MAXIMUM REVERSE LEAKAGE CURRENT @3V ID µA TYPICAL FORWARD VOLTAGE @10mA VF VOLTS TYPICAL CAPACITANCE (See Note 1) @2.5V, 1MHz C pF EM02-100 M02 6.0 0.1 0.8 30 MINIMUM ATTENUATION 800-3000 MHz dB RATED STAND-OFF VOLTAGE VWM VOLTS 5.0 ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified 110 CUT-OFF FREQUENCY (50 OHMS I/O) ZERO BIAS fC MHz

305267.R0 5/07 www.protekdevices.com EM02-100 FIGURE 1 RESISTANCE VS TEMPERATURE (Normalized to Resistance at 25°C) Temperature °C 0.900 Normalized Resistance 1.100 1.060 1.020 0.940 0.980 -40 -20 0 20 40 60 80 100 FIGURE 4 OVERSHOOT & CLAMPING VOLTAGE (through the filter) ESD Test Pulse: +15 kilovolt, 1/30ns (waveform)

5 Volts per Division

/MT48 /MT48/MT46/MT50 /MT48/MT46/MT52 /MT48/MT46/MT54 /MT48/MT46/MT56 /MT49 /MT49/MT46/MT50 /MT49/MT46/MT52 /MT49/MT46/MT54 /MT48/MT49/MT50/MT51/MT52/MT53/MT54 VR - Reverse Voltage - Volts Cj - Capacitance (Normalized) FIGURE 3 CAPACITANCE VS REVERSE VOLTAGE (Normalized to Capacitance at 2.5V DC & 25°C) GRAPHS

405267.R0 5/07 www.protekdevices.com EM02-100 SOT-563 PACKAGE OUTLINE & DIMENSIONS COPYRIGHT © ProT ek Devices 2006 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility wit h respect to the selection or specifications of such products. ProTek Devices

2929 South Fair Lane, Tempe, AZ 85282

Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: sales@protekdevices.com Web Site: www.protekdevices.com /MT84/MT111/MT112/MT32/MT99/MT111/MT118/MT101/MT114/MT32/MT116/MT97/MT112/MT101 /MT75/MT48 /MT116 /MT68 /MT80/MT48 /MT80/MT50 /MT49/MT48/MT32/MT80/MT105/MT116/MT99/MT104/MT101/MT115/MT32/MT67/MT117/MT109/MT117/MT108/MT97/MT116/MT105/MT118/MT101 /MT84/MT111/MT108/MT101/MT114/MT97/MT110/MT99/MT101/MT32/MT111/MT110/MT32/MT84/MT97/MT112/MT101/MT46/MT32/MT177/MT32/MT48/MT46/MT50 /MT65/MT48 /MT66/MT48 /MT80 /MT69 /MT70 /MT87 /MT85/MT115/MT101/MT114/MT32/MT68/MT105/MT114/MT101/MT99/MT116/MT105/MT111/MT110/MT32/MT111/MT102/MT32/MT70/MT101/MT101/MT100 /MT80/MT105/MT110/MT32/MT49 /MT73/MT110/MT100/MT105/MT99/MT97/MT116/MT101/MT100 /MT98/MT121/MT32/MT68/MT111/MT116 Tape & Reel Specifications (Dimensions in millimeters) TAPE & REEL/BULK ORDERING NOMENCLATURE 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix -T7 = 7 Inch Reel - 3,000 pieces per 8mm tape, i.e., EM02-100-T7. 3. Suffix - LF = Lead-Free, Pure Tin Plating, i.e., EM02-100-LF-T7. Outline & Dimensions: Rev 1 - 9/05, 06051 A B C D G J K S 1.50 1.10 0.50 0.17

0.50 BSC

0.08 0.10 1.50 1.70 1.30 0.60 0.27 0.18 0.30 1.70 0.059 0.043 0.020 0.007

0.020 BSC

0.003 0.004 0.059 0.067 0.051 0.024 0.011 0.007 0.012 0.067 DIM MIN MAX MIN MAX MILLIMETERS INCHES PACKAGE DIMENSIONS NOTES 1. Dimensioning and tolerances per ANSI Y14.5M, 1985. 2. Controlling Dimension: Inches 3. Pin 3 is the cathode (Unidirectional Only). 4. Dimensions are exclusive of mold flash and metal burrs. PACKAGE OUTLINE SOT-563 MOUNTING PAD 0.012 0.040 0.020 0.055 0.020 0.30 1.02 0.51 1.40 0.51 DIM Millimeters Inches TYPICAL /MT65 /MT54/MT53/MT52 /MT49/MT50/MT51 /MT71 /MT68 /MT66 /MT67/MT75 /MT83 /MT74 /MT50 /MT51 /MT52 /MT53 /MT49 D E P0 tmax FP 2 W P 4.00 ±0.10 0.25 A0 B0 K0Reel Dia. Tape Width