EI0401NPCSS ETC2 | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Specifications are subject to change without notice (20.08.01) 1 Types EI, Ø 4, 5 x 5 mm Stainless Steel Housing Proximity Sensors Inductive

  • Miniature stainless steel housing Ø 4, aluminium 5 x 5 mm
  • Sensing distance: 1 mm
  • Power supply: 10 to 30 VDC
  • Output: Transistor NPN/PNP, make or break switching
  • P rotection: Short-circuit, reverse polarity and overload
  • LED-indication for output ON
  • 2 m PUR cable or M8 plug Product Description Miniature inductive proximity sensor available as Ø 4 and 5 x 5 mm types. Output con- figuration for NPN/PNP with both NO and NC types as standard. Housing mater ials are stainless steel for Ø 4 and aluminium for the 5 x 5 mm type. Cabled models utilise 2 meters of PUR cable and plug versions features a bright ring LED. Type Housing diameter (mm) Rated operating dist. (mm) Output type Housing material Housing type Connection type Type Selection Housing Rated Connection Ordering no. Ordering no. Ordering no. Ordering no. diameter operating type Transistor NPN Transistor NPN Transistor PNP Transistor PNP dist. (Sn) Make switching Break switching Make switching Break switching Ø 4 mm 0.8 mm 1) Cable EI 0401 NPOSS EI 0401 NPCSS EI 0401 PPOSS EI 0401 PPCSS Ø 4 mm 0.8 mm 1) Plug EI 0401 NPOSS-5 EI 0401 NPCSS-5 EI 0401 PPOSS-5 EI 0401 PPCSS-5 5 x 5 mm 0.8 mm 1) Cable EI X501 NPOSS EI X501 NPCSS EI X501 PPOSS EI X501 PPCSS 5 x 5 mm 0.8 mm 1) Plug EI X501 NPOSS-5 EI X501 NPCSS-5 EI X501 PPOSS-5 EI X501 PPCSS-5 1) For flush mounting in metal Specifications Rated operational volt. (UB) 10 to 30 VDC (ripple included) Ripple ≤ 10% Rated operational current (Ie) Continuous ≤ 150 mA @ + 25°C (+75°F) No-load supply current (Io) ≤ 2.1 mA OFF: 1.5 mA ON: 10 mA Voltage drop (Ud)< 1 V Protection Reverse polarity, short-circuit, overload Transient voltage ≤ 1 kV/0.5 J (prepared) Power ON delay Ca. 500 µs Frequency of operating cycles (f) 1000 Hz Indication for output ON LED, yellow Assured operating dist. (Sa)0 to 0.52 mm Repeat accuracy (R) ± 0.01 mm Hysteresis (H) (Differential travel) 3 to 15% of sensing distance Effective operating dist. (Sr) 0.9 x Sn ≤ Sr ≤ 1.1 x Sn Usable operating dist. (Su) 0.85 x Sr ≤ Su ≤ 1.15 x Sr Ambient temperature Operating -25° to +70°C (-13° to +158°F) Storage -30° to +80°C (-22° to +176°F) Degree of protection Plug versions: IP 65 Cable versions: IP 67 Connection Cable 2 m, 3 x 0.14 mm 2 grey PUR, oil proof Plug M8, CONH5A-xxx Serie Housing material Body Ø 4 Stainless steel (1.4301) 5 x 5 mm Aluminium Cap Plastic Weight Cable versions: 25 g Plug versions: 4 g Tightening torque 1 Nm CE-marking Yes Ordering Key EI 0401PPO SS-5

2 Specifications are subject to change without notice (20.08.01) EI, Ø 4, 5 x 5 mm Dimensions EI 0401 xPxSS EI 0401 xPxSS-5 Power Supplies Power supplies VDC: > SS 130/140. Power supplies with amplifier relays: > SV 190. EI X501 xPxSS EI X501 xPxSS-5 5 x 5

2.8 SENSING FACE

2.6 1.5 5.5 14 2 x M1.6LED 5.5 14 2 x M1.6 LED A A 1(+)3(-) 4(OUT) 2.8 25 21 5 x 5 Ø6.9 M8 x 1 SENSING FACE 27 2000 15.4 LED Ø3 20 Ø6.9 M8 x 1 LED A A 3(-) 1(+) 4(OUT) Wiring Diagrams 1 BN 4 BK 3 BU 1 BN 2 WH 3 BU 1 BN 4 BK 3 BU 1 BN 2 WH 3 BU NPN - Make switching NPN - Break switching PNP - Make switching PNP - Break switching Installation Hints Relief of cable strain Protection of the sensing face Switch mounted on mobile carrierTo avoid interference from inductive voltage/ current peaks, separate the prox. switch pow- er cables from any other power cables, e.g. motor, contactor or solenoid cables Incorrect Correct The cable should not be pulled A proximity switch should not serve as mechanical stop Any repetitive flexing of the cable should be avoided