EGVD250ELL622MM30H CHEMI-CON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. Vibration resistant structure, 135℃ GVDSeries ・Structure of higher vibration resistance by GPD series (acceleration 392m/s , 40G) ・Guaranteed short time at 150℃ ・Designed for electric power steering and ECU (include engine control, direct fuel injection) etc. ・Rated voltage range : 25 to 100V, Capacitance range : 510 to 8,200 µ F ・Solvent resistant type ・RoHS Compliant ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. ◆SPECIFICATIONS Items Characteristics Category Temperature Range -40 to +135℃ Rated Voltage Range 25 to 100Vdc Capacitance Tolerance ±20% (M) (at 20℃, 120Hz) Leakage Current I=0.03CV or 4µA, whichever is greater. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃, 1 minute) Dissipation Factor (tanЎ) Rated voltage (Vdc) 25V 35V 50V 63V 80V 100V When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase. (at 20℃, 120Hz) Low Temperature Characteristics (Max. Impedance Ratio) Rated voltage (Vdc) 25V 35V 50V 63V 80V 100V Endurance 1 The following specifications shall be satisfied when the capacitors are restored to 20 ℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 125℃ or 135℃. Time 125℃ 25 to 100Vdc：3,000hours 135℃ 25 to 50Vdc：3,000hours 63 to 100Vdc：2,000hours Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value Endurance 2 The following specifications shall be satisfied when the capacitors are restored to 20℃ after the test condition that the rated voltage is applied for 100 hours at 150℃ and DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 125℃ or 135℃. Time 125℃ 25 to 100Vdc：2,500hours 135℃ 25 to 50Vdc：2,500hours 63 to 100Vdc：1,500hours Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value Shelf Life The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 125℃without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value Vibration The following specifications shall be satisfied when the capacitors are restored to 20 ℃ after subjected to vibration test (vibration profile shown below) at room temperature (15 to 35℃). Capacitance change ≦±5％ of the initial value D.F. (tanδ) ≦The initial specified value Leakage current ≦The initial specified value Vibration profile Vibration frequency range 10 to 2,000Hz Amplitude or Acceleration 1.5mm peak to peak or 392m/s (40G), whichever is the less severe Sweep rate 10 to 2,000 to 10Hz 0.5 octave/minute Direction and period of motion 2 hours in each of 3 mutually perpendicular directions (total of 6hours) Fixation Fix main body and Lead teminal using a fixture tool, please contact us for detail. ◆DIMENSIONS [mm] Vent F±0.5 φD φd F φD' 0.8 7.5 φD+0.5max. L+1.5max.Gas escape end seal Terminal Code : E● φd φD' 15min. 4min. Coated Case * Please contact us about lead formings and mounting methods. Vibration resistance GVDGPD P219 222 CAT. No. E1001Q MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. GVDSeries ◆PART NUMBERING SYSTEM Please refer to "Product code guide (radial lead type)" Supplement code Size code Capacitance tolerance code Capacitance code (ex. 680µF:681, 8,200µF:822) Lead forming·taping code Terminal code Voltage code (ex. 25V:250, 50V:500) Series code Category E G V D A A A E A A A A A A A A HM 81 15 16 1714 1811 12 135 6 72 3 4 9 10 ◆STANDARD RATINGS WV (Vdc) Cap (µF) Case size ПDʷL(mm) ESR (Њmax/100kHz) Rated ripple current (mArms/100kHz) Part No. 20ˆ -40ˆ 125ˆ 135ˆ 25 6,200 18×30 0.023 0.19 5,380 3,330 EGVD250E□□622MM30H 8,200 18×35.5 0.019 0.13 6,110 3,750 EGVD250E□□822MMP1H 35 3,600 18×30 0.023 0.19 5,380 3,330 EGVD350E□□362MM30H 4,700 18×35.5 0.019 0.13 6,110 3,750 EGVD350E□□472MMP1H 50 2,000 18×30 0.029 0.26 5,050 2,910 EGVD500E□□202MM30H 2,400 18×35.5 0.024 0.20 5,760 3,330 EGVD500E□□242MMP1H 63 1,300 18×30 0.029 0.18 3,930 3,100 EGVD630E□□132MM30H 1,800 18×35.5 0.024 0.14 4,920 3,520 EGVD630E□□182MMP1H 80 820 18×30 0.029 0.18 3,930 3,100 EGVD800E□□821MM30H 1,200 18×35.5 0.024 0.14 4,920 3,520 EGVD800E□□122MMP1H 100 510 18×30 0.038 0.25 3,800 2,830 EGVD101E□□511MM30H 680 18×35.5 0.030 0.19 4,550 3,210 EGVD101E□□681MMP1H □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency(Hz)Capacitance(µF) 120 1k 10k 100k 510 0.50 0.85 0.94 1.00 680 to 2,000 0.60 0.87 0.95 1.00 2,400 to 3,600 0.75 0.90 0.95 1.00 4,700 to 8,200 0.85 0.95 0.98 1.00 Please contact us for lifetime estimation. Vibration resistant structure, 135℃ 223 CAT. No. E1001Q MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS