EGP30A FAIRCHILD | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • Glass passivated cavity-free junction
  • High surge curr ent capability
  • Low leakage current
  • Superfast recovery time for high efficiency
  • Low forward voltage, high current capability Absolute Maximum Ratings* Ta = 25°C unless otherwise noted * These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. Electrical Characteristics* Ta = 25°C unless otherwise noted * Pulse Test: Pulse Width≤300μs, Duty Cycle≤2% Symbol Parameter Value Units IO Average Rectified Current .375 " lead length @ TL = 55°C 3.0 A if(surge) Peak Forward Surge Current 8.3 ms single half-sine-wave Superimposed on rated load (JEDEC method) 125 A PD Total Device Dissipation Derate above 25°C 6.25 W mW°C RθJA Thermal Resistance, Junction to Ambient 20 °C/W RθJL Thermal Resistance, Junction to Lead 8.5 °C/W TJ, TSTG Junction and Storage Temperature Range -65 ~ 150 °C Parameter Device Units30A 30B 30C 30D 30F 30G 30J 30K Peak Repetitive Reverse Voltage 50 100 150 200 300 400 600 800 V Maximum RMS Voltage 35 70 105 140 210 280 420 560 V DC Reverse Voltage (Rated VR) 50 100 150 200 300 400 600 800 V Maximum Reverse Current @ rated VR TA = 25°C TA = 125°C 5.0 100 μA μA Maximum Reverse Recovery Time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A 50 75 nS Maximum Forward Voltage @ 3.0 A 0.95 1.25 1.7 V Typical Junction Capacitance VR = 4.0 V, f = 1.0 MHz 95 75 pF DO-201AD Glass case COLOR BAND DENOTES CATHODE

2 www.fairchildsemi.com EGP30A - EGP30K Rev. A EGP30A - EGP30K 3.0 Ampere Glass Passivated High Efficiency Rectifiers Typical Performance Characteristics

3 www.fairchildsemi.com EGP30A - EGP30K Rev. A EGP30A - EGP30K 3.0 Ampere Glass Passivated High Efficiency Rectifiers Reverse Recovery Time Characterstic and Test Circuit Diagram

The following are registered and unregistered trademarks and service ma rks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or sys tems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordanc e with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms ACEx® Build it Now™ CorePLUS™ CROSSVOLT™ CTL™ Current Transfer Logic™ EcoSPARK® Fairchild® Fairchild Semiconductor® FACT Quiet Series™ FACT® FAST® FastvCore™ FPS™ FRFET Global Power ResourceSM Green FPS™ Green FPS™ e-Series™ GTO™ i-Lo™ IntelliMAX™ ISOPLANAR™ MegaBuck™ MICROCOUPLER™ MicroFET™ MicroPak™ Motion-SPM™ OPTOLOGIC OPTOPLANAR® PDP-SPM™ Power220® Power247® POWEREDGE® Power-SPM™ PowerTrench Programmable Active Droop™ QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ SMART START™ SPM STEALTH™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ The Power Franchise TinyBoost™ TinyBuck™ TinyLogic TINYOPTO™ TinyPower™ TinyPWM™ TinyWire™ µSerDes™ UHC UniFET™ VCX™ Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data; supplementary data will be pub- lished at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontin- ued by Fairchild semiconductor. The datasheet is printed for reference infor- mation only. Rev. I30